Content |
The Denon Professional DN-500R SD and USB Recorder is a 1U rack mountable recorder and audio playback device designed for installed sound applications such as houses of worship, education, and more. The unit can record to both SD/SDHC cards and USB media either one at a time for longer recording times or simultaneously to both mediums for backup.
The front panel of the recorder features an OLED display for showing information such as time, sample rate, and file name. A set of rubberized buttons control basic functions such as record, stop, pause, play, forward, back, as well as menu control and file management functions such as move, copy, combine, divide, and undo. A shift button changes these buttons to functions such as dimming the display, marking files, record monitoring, switching to frame mode, and adjusting pitch. A rotary knob button controls recording level, recording balance, and navigates the menu settings. The front of the unit has an SD/SDHC card slot for inserting recording media with ejection button, as well as a USB female type A port for plugging in USB media such as thumb drives and external USB hard drives. A second USB female type A port allows you to plug in a USB QWERTY keyboard for entering file information while recording. The unit also includes a 1/4" headphone out and headphone level control knob for monitoring while recording or listening to recorded tracks.
For I/O, the back of the unit features left and right balanced analog 3-pin XLR female inputs, left and right unbalanced analog RCA inputs, a balanced digital 3-pin XLR AES/EBU input, an unbalanced digital coaxial SPDIF input, left and right balanced analog 3-pin XLR male outputs, left and right unbalanced analog RCA outputs, a balanced digital 3-pin XLR AES/EBU output, and an unbalanced coaxial SPDIF output. For remote control, the unit features both an RS-232C and a 25-pin parallel port. The included rack ears are removable for tabletop operation.
Recording Media Records to both SD and SDHC cards as well as USB media in either dual simultaneous mode for redundant backup or serially one followed by the other in relay/cascade mode for longer recording times Connections Features balanced XLR analog and AES/EBU digital I/O as well as unbalanced RCA analog and SPDIF digital I/O Remote Control Compatible with RS-232C, Parallel GPIO, and Denon's RC-400S "Hot Start" serial remote controller for installed applications Direct Control Features bright OLED display and large function buttons for changing recorder settings Front Panel USB Keyboard Input Features USB port for connecting to a USB keyboard and manually editing file name information while recording Timer Record and Playback Records and plays audio according to user-specified markers in time code DMP Mark Editor Software Includes Windows software for editing markers and marker labels placed within the audio file
System
| SD/USB Recorder | Compatible Media | SD/USB memory/USB HDD | Playable File Formats | SD, USB: FAT16/FAT32/HFS+ | Extension | WAV: WAV, AIFF, AIF
MP3: MP3
AAC: M4A with AAC-LC compression | Resolution | WAV: 16-bit, 24-bit | Bit Rate | MP3: 32 to 320 kbps and VBR
AAC: 64 to 320 kbps and VBR | Sampling Frequency | WAV: 96, 48, 44.1 kHz
MP3: 48, 44.1 kHz
AAC: 48, 44.1 kHz | Number of Channels | 2 (stereo), 1 (mono) | Frequency Response | 20 to 20,000 Hz (+0.5 dB/ -1 dB) | S/N Ratio | More than 89 dB (A-weighted) | Total Harmonic Distortion | Less than 0.01% | Dynamic Range | More than 106 dB (for 24 bit WAV playback) | Channel Separation | Less than -90 dB | Variable Pitch Width | -16% to 16% | Variable Trim Adjustment Width | ± 2.0 dB |
| | TASCAM's award winning DR-60D is the new audio recording solution for on-set filmmakers and videographers using DSLR's. For years, filmmakersProSound Network Best of Show have been trying different methods for recording audio, using bulky recorders designed for music and trying to transform the inferior audio technology built-into DSLR's. Now TASCAM has designed an answer that pros and amateurs alike have been waiting for.
The DR-60D is a brand new 4-track solid-state recorder utilizing TASCAM's decades of experience. The recorder utilizes high-grade HDDA pre-amps, legendary AD converters, and a durable but lightweight structure and shape. This device will fit snuggly under any camera or into any rig, and record up to 96kHz/24-bit high quality audio straight to SD/SDHC media. Filmmakers have at their disposal two 1/4“-XLR Locking Combo MIC/LINE Inputs, 3.5mm Stereo MIC Input, Camera In, Camera Out, Line Out and Headphone Out. Both 1/4“-XLR Combo Inputs supply +48V Phantom Power and the 3.5mm Input supplies Plug-In Power for microphones requiring a bias voltage.
The DR-60D is incredibly easy to use, employing TASCAM's very popular user interface and external controls for every major operation. The body structure, soft-touch keys and dials are designed specifically to help eliminate handling noise. The multiple record modes include, 4-Channel Record, Auto Record and TASCAM's Dual Record "Safety Track" Mode make the DR-60D one of the most versatile recorders on the market.
- Record to SD/SDHC card (Up to 32GB)
- Simultaneously record up to 4 tracks
- Record Mode:MONO, STEREO, DUAL MONO, DUAL STEREO, 4-CHANNEL
- Recording format:44.1/48/96kHz 16/24bit (WAV/BWF)
- TASCAM original HDDA microphone preamps
- Recording levels can be adjusted independently for the 1/L, 2/R and 3-4 inputs
- Two XLR/TRS inputs support +4dBu line level input and phantom power (24 or 48VDC on XLRF)
- Plug-in power and high-output mic input supported on inputs 3-4
- CAMERA OUT connector for output from the DR-60D's mixer (adjustable gain)
- CAMERA IN connector for sound monitoring from the camera
- Independent adjustable LINE OUT and HEADPHONE jacks for high-quality sound output
- 50mW/ch headphone output
- Tripod mounting socket (bottom) and DSLR mounting screw attachment (top)
- Handles protect the screen and can be used to attach a shoulder strap
- Soft-Touch Rubber Keys for silent operation
- HOLD switch to prevent accidental operation
- QUICK button feature for easy access to various functions
- 128x64 pixel LCD with backlight
- USB 2.0 connection for high-speed transferring of files
- Mini USB cable included
- Operates on 4-AA batteries, an AC adapter (sold separately) or USB bus power
- Can extend battery life with BP-6AA battery pack (sold separately)
- Dedicated remote control jack for the wired RC-10 remote control or RC-3F footswitch (both sold separately)
- Internal mixer: PAN and LEVEL controls
- Low cut filter(40/80/120Hz)
- Limiter (1/L and 2/R can be selected for link-operation)
- Delay function for microphone distance adjustment (up to 150ms)
- M-S decode function
- Slate tone generator (AUTO/MANUAL)
- Selectable duration of slate tone from four positions (0.5/1/2/3 sec, when auto-generated)
- Selectable slate tone generation. 3 positions: OFF/HEAD/HEAD+TAIL, when auto-generated
- File name format can be set to use a user-defined word or date
- Dual-recording function allows two files to be recorded simultaneously at different levels
- Auto-record function can automatically start and stop recording at set level
- Pre-recording function allows the unit to record a 2 second sound buffer before recording is activated
- Self-timer function for solo recording
- New file starts recording automatically without interruption when maximum file size is reached
- Track incrementing function allows a recording to be split by creating a new file when desired
- Jump back and play function
- Equalizer function for playback, and level alignment function to enhance the perceived overall sound pressure
- Resume function to memorize the playback position before the unit is turned off
- MARK function up to 99 points per audio track
- DIVIDE function
SPECIFICATIONS
Recording media |
SD card(64MB to 2GB), SDHC card(4GB to 32GB) |
Recording format |
|
WAV |
44.1/48/96kHz, 16/24bit |
BWF |
44.1/48/96kHz, 16/24bit |
Number of channels |
4channel (stereo x2) |
Analog audio input |
|
1/L, 2/R connectors |
|
Connector |
XLR-3-31 (1:GND, 2:HOT, 3:COLD)/6.3mm(1/4“)TRS standard jack |
Set to "MIC / MIC+PHANTOM“ |
|
Input impedance |
2k ohms |
Phantom power |
48V +/-4V(10mA/CH) / 24V +/-4V(10mA/CH) |
Maximum input level |
0dBu |
Minimum input level |
-72dBu |
MIC input gain |
TRIM MAX |
LOW |
+11dB |
MID |
+36dB |
HIGH |
+52dB |
Set to "LINE“ |
|
Input impedance |
10k ohms or more |
Standard input level |
+4dBu |
Maximum input level |
+24dBu |
3-4 connector |
|
Connector |
3.5mm (1/8“) stereo mini jack (this connector can be supplied plug-in power) |
Input impedance |
10k ohms |
Maximum input level |
+10dBV |
Minimum input level |
-50dBV |
MIC input gain |
TRIM MAX |
LOW |
+3dB |
HIGH |
+26dB |
CAMERA IN connector |
|
Connector |
3.5mm (1/8“) stereo mini jack |
Input impedance |
10k ohms |
Standard input level |
-10dBV |
Maximum input level |
+6dBV |
Analog audio output |
|
CAMERA OUT connector |
|
Connector |
3.5mm (1/8“) stereo mini jack |
Output impedance |
200 ohms |
Standard output level |
-50dBV |
Maximum output level |
-30dBV |
LINE OUT connector |
|
Connector |
3.5mm (1/8“) stereo mini jack |
Output impedance |
200 ohms |
Standard output level |
-10dBV |
Maximum output level |
+10dBV |
PHONES connector |
|
Connector |
3.5mm (1/8“) stereo mini jack |
Maximum output level |
50mW + 50mW |
USB |
|
Connector |
Mini-B type |
Format |
USB2.0 HIGH SPEED mass storage class |
REMOTE |
|
Connector |
2.5mm TRS jack |
Power |
Four AA batteries(Alkaline or NI-MH),
USB bus power,
Dedicated AC adapter(TASCAM PS-P515U, sold separately),
Dedicated external battery pack(TASCAM BP-6AA, sold separately) |
Power consumption |
5.4W |
Continuous operation time |
2ch WAV, 44.1kHz, 16bit rec |
DR-60D |
|
Alkaline batteries (EVOLTA) |
About 2:30 min (Phantom on)
About 4:30 min (Phantom off) |
NI-MH batteries (eneloop) |
About 3:15 min (Phantom on)
About 5:00 min (Phantom off) |
NI-MH batteries (eneloop pro) |
About 3:45 min (Phantom on)
About 6:00 min (Phantom off) |
DR-60D+BP-6AA |
|
Alkaline batteries (EVOLTA) |
About 5:30 min (Phantom on)
About 10:30 min (Phantom off) |
NI-MH batteries (eneloop) |
About 7:30 min (Phantom on)
About 12:00 min (Phantom off) |
NI-MH batteries (eneloop pro) |
About 9:30 min (Phantom on)
About 14:30 min (Phantom off) |
Dimensions |
133(W)×93.2(H)×78(D)mm (with the top adapter attached) |
Weight |
510g (not including batteries) |
Operating temperature |
0˚C to 40˚C |
Standard accessories |
USB cable, warranty card, Owner's manual |
Computer compatibility |
Windows |
OS |
Windows XP, Windows Vista, Windows 7, Windows 8 |
CPU |
Pentium 300MHz or more |
RAM |
128MB or more |
USB |
recommended: USB2.0 |
Macintosh |
OS |
Mac OS X Jaguar (V10.2), Mac OS X Panther (V10.3), Mac OS X Tiger (V10.4),
Mac OS X Leopard (V10.5), Mac OS X Snow Leopard(V10.6.8), OS X Lion(V10.7),
OS X Mountain Lion(V10.8) |
CPU |
Power PC, iMac, G3, G4 266MHz or more |
|
64MB or more |
USB |
recommended: USB2.0 |
Audio performance |
Frequency response |
20-20kHz +0.5/-2dB(LINE IN or MIC IN to LINE OUT, Fs44.1k/48kHz, JEITA)
20-40kHz +0.5/-3dB(LINE IN or MIC IN to LINE OUT, Fs96kHz, JEITA) |
Distortion |
0.02% or less(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96kHz, JEITA) |
S/N ratio |
92dB or more(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96kHz, JEITA) |
Equivalent input noise |
-120dBu or more |
Recording duration
The table below shows the maximum recording time on SD/SDHC cards of different capacities for different file formats for recording.
File format(recording setting) |
SD/SDHC card capacity(hours:mintes) |
1GB |
2GB |
4GB |
8GB |
WAV/BWF 16bit(STEREO) |
44.1kHz |
1:41 |
3:22 |
6:44 |
13:28 |
48kHz |
1:33 |
3:06 |
6:12 |
12:24 |
96kHz |
0:46 |
1:33 |
3:06 |
6:12 |
WAV/BWF 24bit(STEREO) |
44.1kHz |
1:07 |
2:15 |
4:30 |
9:00 |
48kHz |
1:02 |
2:04 |
4:08 |
8:16 |
96kHz |
0:31 |
1:02 |
2:04 |
4:08 |
- The recording times shown above are estimates. They might differ depending on the SD/SDHC card in use.
- The recording times shown above are not continuous recording times, but rather they are the total possible recording times for the SD/SDHC card.
- If recorded in mono in WAV files, the maximum recording time will be double the figures above.
- For dual and 4-channel recording in WAV/BWF format, the recording times are about half those shown above.
| DP-008EX
- Eight mono tracks
- CD-quality recording (16bit/44.1kHz)
- Two tracks simultaneous recording/ eight tracks simultaneous playback
- Dedicated stereo master track available
- Record to SD/SDHC card (Up to 32GB)
- 2 Built-in omni-directional condenser microphones
- Microphone sensitivity can be selected from 2-positions (Low/High)
- Two TS 1/4" or XLR mic/line inputs
- INPUT A can connect high-impedance instrument directly (Like an electric-guitar)
- Phantom power supply
- Independent LEVEL/PAN/Reverb SEND knobs for each track
- Two RCA unbalanced line inputs
- 20mW/ch headphone output
- Footswitch ready with polarity switching (Notice: can't use RC-3F)
- 128x64 dot-matrix LCD with backlight
- Four AA batteries operation up to 6.5 hours (When recording, using the eneloop battery)
- Insert effects for input channels (2-band shelving EQ, compressor, exciter, de-esser)
- Mastering effects (2-band shelving EQ, multi-band compressor, normalize)
- Auto analysis mastering function
- 2-band shelving EQ for each track
- Reverb effects (Hall1/2,Room,Studio,Plate1/2)
- Optional AC adapter ready (TASCAM PS-P520)
- Can connect an external battery pack (TASCAM BP-6AA)
- Direct locate function by jog-wheel
- Repeat playback between IN/OUT point
- Track edit functions(COPY PASTE, COPY INSERT, MOVE PASTE, MOVE INSERT, OPEN, CUT, SILENCE, CLONE TRACK, CLEAN OUT)
- Bounce function allows recording of more six tracks
- UNDO/REDO(UNDO HISTORY) function
- Chromatic tuner and metronome included
- High-speed data transfer by USB2.0 connection
- Backup and restore songs
- File import/export by Wav format (mono/stereo)
- Export stereo master file as stereo wav format
- 2GB SD card included
|
The TASCAM SS-200 Solid State Recorder - designed for the Broadcast and Contractor markets - record in WAV & MP3 to Compact Flash, SD/SHC, and USB memory. The SS-R200 features parallel and RS-232C serial control balanced & unbalanced I/O, and coaxial digital I/O. It supports the RC-20 direct play remote for up to 20 tracks of flash start.
- Solid state recoding to any available Media (CF, SD/SDHC, USB Memory)
- One-rack-space compact design
- Up to 20 tracks of flash start with RC-20 and RC-SS20 remote control devices
- PS/2 or USB keyboard connection for file name edit, transport control, edit and flash start
- RS-232C and Parallel Control I/O
- Multiple playback modes for situations requiring continuous, single, programmed and random playback
- Playback speed control without pitch change
- XLR balanced I/O, RCA unbalanced I/O, coaxial S/PDIF, or AES/EBU digital I/O
- Dimensions (W x H x D): 19 x 1.8 x 11.9 (in) 482.6 x 44.5 x 301 (mm)
- Weight: 7.50 (lbs) 3.4(kg)
|
The Tascam iM2X turns an Apple iPhone 4, iPad or iPod Touch 4G into a powerful PCM audio recorder for CD-quality recordings. It consists of a pair of condenser microphones and a high-quality preamp and plugs into the dock connector of the iOS device. The microphone elements are XY oriented for clear stereo definition and minimal phase differences. Moreover, they are adjustable over 180 degrees for the best sound placement.
Unlike mics that use the iOS deviceʼs built-in preamp, the iM2X with its internal A/D converter ensures low noise and better linearity in frequency response. The microphone elements also used in Tascam DR series recorders can handle sound pressure levels up to 125 dB to capture the loudest concerts and instruments without distortion. Thanks to an input level control and a two-colour level meter, level adjustment is very simple. A switchable limiter also contributes to this by reducing sudden peaks and protecting against unforeseen overload.
The iM2X powered through the dock connector, so no battery is required. A USB input is provided to charge the iOS device for long recordings, either through a computer or a USB charger.
An appropriate 2-track recording application (Tascam PCM Recorder) for iOS devices can be downloaded from AppStore at no charge.
Main Features
Turns your Apple iPhone 4, iPad or iPod Touch 4G into a high-grade PCM audio recorder Stereo condenser microphone in XY orientation for clear stereo definition and minimal phase differences Accepts sound pressure level up to 125 dB SPL Microphone can be swivelled by 180 degrees to capture sound sources in front or behind the unit Allows recordings in CD quality (44.1kHz/16-bit) Input level rotary control Input level indicator (green/red) Switchable limiter to avoid distorted recordings Power supply via dock connector, no battery required USB connector available for recharging the iOS device Easy setup (attaches to the deviceʼs dock connector) Tascam 2-track recording app can be downloaded from the Apple AppStore at no charge Specifications
General Microphone type Cardioid condenser (stereo) Maximum input level 125 dB SPL Input level adjustment range 0–40 dB Frequency range 10 Hz – 20 kHz Sampling frequency 44.1 kHz Bit rate 16 bit iOS device recharging port USB Mini-B connector iOS device connector 30-pin dock connector Device support iPhone 4S, iPhone 4, iPad (3rd generation), iPad 2, iPad or iPod touch (4th generation) Power supply and other specifications Power supply Provided through the iOS device connector Power consumption 90 mW Dimensions (W x H x D) 56 mm x 57 mm x 22 mm (including connector) Weight 30 g Operating temperature range 5–35 °C Design and specifications subject to change without notice. |
Reviews
There are no reviews yet.