| Content | This diaphragm is used in models 077-2402-2404H, 2404H-1, and 2405.
This diaphragm is also the correct replacement for the Peavey HD94
Specifications
- 8 ohm
- Overall diaphragm diameter 3-in or 76mm
- Voice coil diameter 1 3/4-in or 44mm
- Radiator ring is aluminum
This diaphragm has the aluminum ring radiator with a copper clad
aluminum edge-wound voice coil on a Kapton former just like the
original JBL 2404 diaphragm.
The aluminum ring radiator of this diaphragm will give you a truer, more
lifelike sound then the muddy sound given from the titanium diaphragms found
elsewhere. Titanium diaphragms do not handle more power.
This diaphragm will handle the same amount of power, and sounds the same as the
original JBL 2404 diaphragm.
JBL: 4333B, 4612B, 4628B, 4698B, 4730A, SR4732, SR4732A, SR4732AT, SR4732N, SR4732X, SR4732XF, VRX932LA-1, VRX932LAP/230, 2402, 2402H, JBL 2404H, 2404H-1, JBL 2405, 2405H, 075, 077, 4623, 4682, 4602B, 4612OK, 4623B, 4680B, and many more!
Please check the model and size of your speakers before ordering to be sure you receive the correct diaphragm repair kit.
This is an aftermarket quality diaphragm that will fit the following model: JBL: 4333B, 4612B, 4628B, 4698B, 4730A, SR4732, SR4732A, SR4732AT, SR4732N, SR4732X, SR4732XF, VRX932LA-1, VRX932LAP/230, 2402, 2402H, JBL 2404H, 2404H-1, JBL 2405, 2405H, 075, 077, 4623, 4682, 4602B, 4612OK, 4623B, 4680B, and many more! | MODEL ZG-10CA / DG-10C-A
M-D-10C
26A65D1F
087838253383
TOA 507 07 008 30
TOA Voice for Horn SC-630, SC630M |
-
JBL Factory Speaker Diaphragm Part # D8R2418
-
Voice coil: 1-3/4" (45mm)
-
Diameter: 3" (75mm)
-
Length: 5-1/8" (130mm)
-
Impedance: 8 ohm, DCR: 4 ohm
-
Titanium dome with copper voice coil on Kapton former.
-
Fits JBL Driver and Cabinet Models:
JBL: 2418, JBL 2418H, JBL 2418H-1, 3622N, 3632M-HF, 3632M-HF-T, 3677S, 3722HF, 3722N-HF, 4425LR, AC2212/00-WH, AC2215/00-WH, CAB-55, CAB55, CAB 55, EON-15, EON15, EON 15, EON 15P-1/230, EON POWER15, EON-15-G2, EON15-G2, EON 15-G2, EON-15P, EON15P, EON 15P, MR-902, MR902, MR 902, ,MR-905, MR905, MR 905, MR-922, MR922, MR 922, MR-925, MR925, MR 925, MR-926, MR926, MR 926, MR-935, MR935, MR 935, MR-938, MR938, MR 938, MS-112-WH, MS112-WH, MS 112-WH, MS-115-WH, MS115-WH, MS 115-WH, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
Genuine Celestion CDX1 Driver uses T5503/R Diaphragm in 1415, 1425, 1430. 8 ohms
This is also the replacement diaphragm for the HF Driver in the QSC HPR122i, HPR153i and HPR153F speaker box. Also fits Yorkville NX300and Yorkville NX55P, NX300, YX10, YX12, YX12M, YX15, YX15P, and YX215 cabs. | |
- Voice coil: 3.93″ (100mm)
- Diameter: 5″ (127mm)
- Impedance: 8 ohm, DCR: 4.7 ohm
- Titanium ribbed dome with edge wound voice coil on Nomex former
- We sell an aftermarket version of this diaphragm. See our aftermarket diaphragms page for details.
- Please check your model before ordering to make sure you are getting the correct diaphragm.
- See the “Fits Models” tab for all applicable cabinet and driver numbers.
|
Reviews
There are no reviews yet.