KRK RP-5 G3 Powered reference studio monitor

Discontinued

129.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
    Configuration:2-Way     System type:Active Studio Monitor     Low-Frequency:5″ Aramid Glass Composite woofer     Mid-Frequency:N/A     High-Frequency:1″ soft dome tweeter     Frequency Response:45Hz – 35kHz     Max Peak SPL:106 dB     Amplifier Class:Class A-B     Power Output:50W     High Frequency:20W     Mid-Frequency:N/A     Low Frequency:30W     Input Impedance (Ohms):10 K Ohm balanced     HF Level […]

 

Read more

    Configuration:2-Way
    System type:Active Studio Monitor
    Low-Frequency:5″ Aramid Glass Composite woofer
    Mid-Frequency:N/A
    High-Frequency:1″ soft dome tweeter
    Frequency Response:45Hz – 35kHz
    Max Peak SPL:106 dB
    Amplifier Class:Class A-B
    Power Output:50W
    High Frequency:20W
    Mid-Frequency:N/A
    Low Frequency:30W
    Input Impedance (Ohms):10 K Ohm balanced
    HF Level Adjust:-2dB, -1dB, 0, +1dB
    System Volume:(-30dB – +6dB)
    Indicators:Power
    Input Connectors:
        Unbalanced RCA
        Balanced 1/4″ TRS
        Balanced XLR
    Enclosure Construction:MDF
    Finish:Black vinyl wrap
    Port Configuration:Front firing slot port
    Dimensions (D x W x H): 9.7″ (246mm) x 7.4″ (188mm) x 11.2″ (284mm)
    Weight:13 Lbs. (5.9 Kg.)

Weight 3.00 kg

Reviews

There are no reviews yet.

Be the first to review “KRK RP-5 G3 Powered reference studio monitor”

Your email address will not be published. Required fields are marked *

Quick Comparison

KRK RP-5 G3 Powered reference studio monitor removeADAM S2X Active Studio Monitor 250W removeFOCAL Solo6 Be ACTIVE STUDIO MONITOR removeADAM A77X Active Studio Monitor 100W removeADAM A7X Active Studio Monitor 100W removeM-AUDIO BX8 D3 MONITOR SPEAKER remove
NameKRK RP-5 G3 Powered reference studio monitor removeADAM S2X Active Studio Monitor 250W removeFOCAL Solo6 Be ACTIVE STUDIO MONITOR removeADAM A77X Active Studio Monitor 100W removeADAM A7X Active Studio Monitor 100W removeM-AUDIO BX8 D3 MONITOR SPEAKER remove
Image
SKUH00KR00024S2XSolo6 BeA77XA7XMIEM000281
Rating
Price 129.00 incl. GR VAT 1,394.99 incl. GR VAT 995.00 incl. GR VAT 1,175.00 incl. GR VAT 765.00 incl. GR VAT 182.99 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

In stock

In stock

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderIn stockIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

    Configuration:2-Way
    System type:Active Studio Monitor
    Low-Frequency:5" Aramid Glass Composite woofer
    Mid-Frequency:N/A
    High-Frequency:1" soft dome tweeter
    Frequency Response:45Hz - 35kHz
    Max Peak SPL:106 dB
    Amplifier Class:Class A-B
    Power Output:50W
    High Frequency:20W
    Mid-Frequency:N/A
    Low Frequency:30W
    Input Impedance (Ohms):10 K Ohm balanced
    HF Level Adjust:-2dB, -1dB, 0, +1dB
    System Volume:(-30dB - +6dB)
    Indicators:Power
    Input Connectors:
        Unbalanced RCA
        Balanced 1/4" TRS
        Balanced XLR
    Enclosure Construction:MDF
    Finish:Black vinyl wrap
    Port Configuration:Front firing slot port
    Dimensions (D x W x H): 9.7" (246mm) x 7.4" (188mm) x 11.2" (284mm)
    Weight:13 Lbs. (5.9 Kg.)

PRICE PER UNIT

 

S2X

The S2X brings together the virtues of the ʽclassicalʼ 7” woofer and tweeter combination by using ADAM innovative technologies and top-class materials.

The HexaCone 7” woofer is driven by a sophisticated magnet system with a 2” voice coil creating a greater linear excursion. This produces more dynamics than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio quality of the X-ART and A/B amplifier combination, this monitor surprises the listener with a very powerful, deep, but always tight and precise low end.

 

Review at a glance: "Sonic sensation“

“The ADAM Audio S2X can convince in all areas, concerning the sound as well as the workmanship, and are worth every Euro. […] a no-compromise tool for all who mean serious business, whether in music or postproductions.” (www.96kHz.de, 03/2010)

“We started off with a classical string quartet recording and let´s just say right away that the S2Xs floored us. Several adjectives spring to mind [...] - wide open, transparent, effortless, breathtaking realistic, loud, dynamic, involving... [...] If you close your eyes and continue listening, the S2Xs seem to ‚disappearʽ almost entirely. [...] you gradually become less aware that you´re listening to speakers because they´re like an open window on the music itself. [...] Result: These monitors are up there with the best we´ve tried so far.” (MusicTech, 01/2010)

Woofer
Number1
Basket Ø7.5" (186 mm)
Voice coil Ø2" (50 mm)
Cone materialHexaCone
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Woofer1
TypePWM
Amp. power RMS / music250 W / 350 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 100 W
Control panel
Input Sensitivity (coarse)-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz±4 dB (1 dB steps)
Low Shelf EQ ±4 dB (1 dB steps)
Tweeter gain±2 dB (0.5 dB steps)
Input connectors
AnalogXLR
Digital (optional)AES/EBU / SPDIF / word clock
General data
PanelFront
Frequency response35 Hz - 50 kHz
THD > 80 Hz≤0.8 %
Long term output≥110 dB
Max. peak≥120 dB
Crossover frequencies2200 Hz
Input impedance10 KOhm
Weight23.8 lb (10,8 kg)
Magnetically shieldedOptional
Height x Width x Depth14.5" (370 mm) x 8.5" (220 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual

 

 

The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.

 

Specifications
Frequency response : 40Hz - 40kHz
Maximum SPL : 113dB SPL (peak @ 1m)

Input :

Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV

Bass/mid-range : 150W rms, BASH® technology
Treble : 100W rms, AB class

Electric supply :

Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire

Visualization and control :

Input sensitivity selector
Adjustable tweeter and woofer levels with potentiometers
Power On/off switch
Voltage selector

warning light : Power on LED

Electric supply :

Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire

Woofer : 6W4370B, 6-1/2" (16.5cm) Focal "W" composite sandwich cone speaker
Tweeter : Focal TB871 Beryllium inverted dome tweeter
transducer shielding : Integral through cancellation magnets or by magnet design
Box : 7-1/2" (19mm) MDF panels

Finish :

Dark red natural veneering side panels, black body

Dimensions (HxWxD) : 13 x 9-7/16 x 11-7/16 " (330x240x290mm)
Weight : 24.2lb (11kg)

 

PRICE PER UNIT

A revolutionary formula: 2 x 7 = 77

In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.

The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.

Driver technology

Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.

The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Review samples:

“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012

“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012

Subwoofer
Number1 / 1
Basket Ø7" (175 mm) / 7" (175 mm)
Voice coil Ø1.5" (38 mm) / 1.5" (38 mm)
Cone materialCarbon / rohacell / glass / Carbon / rohacell / glass
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Subwoofer1
TypePWM
Amp. power RMS / music100 W / 150 W
Subwoofer1
TypePWM
Amp. power RMS / music100 W / 150 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
LocationRear
General data
PanelFront
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥114 dB
Max. peak≥122 dB
Crossover frequencies400 / 3000 Hz
Input impedance30 KOhm
Weight28.2 lb (12,8 kg)
Magnetically shieldedOptional
Height x Width x Depth9.5" (235 mm) x 21" (530 mm) x 11" (280 mm)
Warranty5 Years

 

PRICE PER UNIT

ADAMs A7 & A7X: the evolution of a legend

The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldʼs largest internet forums. Still today, the A7 are the reference monitors in many smaller studios.

With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.

Driver technology

The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.

The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Mid-Woofer
Number1
Basket Ø7" (175 mm)
Voice coil Ø1.5" (38 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music100 W / 150 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response42 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥106 dB
Max. peak≥114 dB
Crossover frequencies2500 Hz
Input impedance30 KOhm
Weight20.3 lb (9,2 kg)
Magnetically shieldedNo
Height x Width x Depth13.5" (337 mm) x 8" (201 mm) x 11" (280 mm)
Warranty5 Years
Delivery contents

Power cord, Manual


 

M-Audio BX8 D3 Features:
  • 150W active studio monitor with 8" military-grade Kevlar low-frequency driver and 1.25" silk dome tweeter
  • Bi-amplified design delivers a sound that's both powerful and precise
  • Custom waveguide ensures accurate dispersion for an incredibly tight soundstage
  • Optimized rear-mounted port produces defined low-end response with bass extension down to 37Hz
  • Acoustic Space Control tailors your monitor to your mix space
  • Volume control for dialing in the perfect playback level
  • Balanced combo input allows for flexible installation
  • Front-panel LED shines brightly when the speaker is positioned at an ideal angle
M Audio BX8 D3 8 Inch Powered Studio Monitor Specifications
  • Frequency Range: 37Hz – 22kHz
  • Crossover: 2.0kHz
  • Maximum Peak Input Level: -2dBU
  • Input Types: Balanced 20kO XLR, and TRS
  • Unbalanced: 10kO TS
  • Input Sensitivity: -12dBU
  • HF Driver Size: 31.8 mm (1.25“)
  • LF Driver Size: 203 mm (8“)
  • Amplifier Power: 150W Class A/B
  • HF Driver Power Amp: 70W
  • LF Driver Power Amp: 80W
  • Port: Rear internally flared
  • Controls: Yes
  • Magnetic Shielding: Yes
  • AC Input Voltage: 100–120V, 50/60 Hz 220–240V, 50/60 Hz
  • Enclosure Construction: MDF
  • Enclosure Finish: Black PVC
  • Baffle Construction: Injection-molded ABS
  • Baffle Finish: Matte black with Soft-touch
  • Dimensions (HxWxD): 384 mm x 250mm x 302mm (15.1” x 9.8” x 11.9”)
  • Weight: 10.5 kgs (23.1 lbs)
  • Display Carton (HxWxD): 398mm x 345mm x 482mm (15.6” x 13.5” x 18.9”)
  • Shipping Carton (HxWxD): 412mm x 359mm x 502mm (16.2” x 14” x 19.68”)
  • Shipping Weight: 12.8kgs (28.22lbs)
  • Configuration: 2-Way bi-amp
  • System Type: Active Monitor
  • Fuse Rating: 220–240V~ T1AL, 250V 100–120V~ T2AL, 250V
  • Power Consumption: 150W
  • Shape: Bass-reflex
Weight3.00 kg11.00 kg11.00 kg13.00 kg10.00 kg13.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.00 kg
Weight 11.00 kg
Weight 11.00 kg
Weight 13.00 kg
Weight 10.00 kg
Weight 13.00 kg