Content |
Configuration:2-Way
System type:Active Studio Monitor
Low-Frequency:5" Aramid Glass Composite woofer
Mid-Frequency:N/A
High-Frequency:1" soft dome tweeter
Frequency Response:45Hz - 35kHz
Max Peak SPL:106 dB
Amplifier Class:Class A-B
Power Output:50W
High Frequency:20W
Mid-Frequency:N/A
Low Frequency:30W
Input Impedance (Ohms):10 K Ohm balanced
HF Level Adjust:-2dB, -1dB, 0, +1dB
System Volume:(-30dB - +6dB)
Indicators:Power
Input Connectors:
Unbalanced RCA
Balanced 1/4" TRS
Balanced XLR
Enclosure Construction:MDF
Finish:Black vinyl wrap
Port Configuration:Front firing slot port
Dimensions (D x W x H): 9.7" (246mm) x 7.4" (188mm) x 11.2" (284mm)
Weight:13 Lbs. (5.9 Kg.)
|
PRICE PER UNIT A revolutionary formula: 2 x 7 = 77 In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line. The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring. Driver technology Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels. The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image. Amplifiers / controls Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch. The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors. Review samples: “… a refreshing change“ "… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012 “… wide and spacious soundstage with solid left/right imaging“ "… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012 Subwoofer | | Number | 1 / 1 | Basket Ø | 7" (175 mm) / 7" (175 mm) | Voice coil Ø | 1.5" (38 mm) / 1.5" (38 mm) | Cone material | Carbon / rohacell / glass / Carbon / rohacell / glass | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Subwoofer | 1 | Type | PWM | Amp. power RMS / music | 100 W / 150 W | Subwoofer | 1 | Type | PWM | Amp. power RMS / music | 100 W / 150 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 75 W | Control panel | | Input Sensitivity | -∞ to +14 dB | High Shelf EQ > 5 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR / RCA | Location | Rear | General data | | Panel | Front | Frequency response | 38 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.5 % | Long term output | ≥114 dB | Max. peak | ≥122 dB | Crossover frequencies | 400 / 3000 Hz | Input impedance | 30 KOhm | Weight | 28.2 lb (12,8 kg) | Magnetically shielded | Optional | Height x Width x Depth | 9.5" (235 mm) x 21" (530 mm) x 11" (280 mm) | Warranty | 5 Years |
|
The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.
Specifications Frequency response : | 40Hz - 40kHz | Maximum SPL : | 113dB SPL (peak @ 1m) |
Input :
|
Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV
| Bass/mid-range : | 150W rms, BASH® technology | Treble : | 100W rms, AB class |
Electric supply :
|
Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire
|
Visualization and control :
|
Input sensitivity selector
Adjustable tweeter and woofer levels with potentiometers
Power On/off switch
Voltage selector
| warning light : | Power on LED |
Electric supply :
|
Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire
| Woofer : | 6W4370B, 6-1/2" (16.5cm) Focal "W" composite sandwich cone speaker | Tweeter : | Focal TB871 Beryllium inverted dome tweeter | transducer shielding : | Integral through cancellation magnets or by magnet design | Box : | 7-1/2" (19mm) MDF panels |
Finish :
|
Dark red natural veneering side panels, black body
| Dimensions (HxWxD) : | 13 x 9-7/16 x 11-7/16 " (330x240x290mm) | Weight : | 24.2lb (11kg) |
| M-Audio BX8 D3 Features:
- 150W active studio monitor with 8" military-grade Kevlar low-frequency driver and 1.25" silk dome tweeter
- Bi-amplified design delivers a sound that's both powerful and precise
- Custom waveguide ensures accurate dispersion for an incredibly tight soundstage
- Optimized rear-mounted port produces defined low-end response with bass extension down to 37Hz
- Acoustic Space Control tailors your monitor to your mix space
- Volume control for dialing in the perfect playback level
- Balanced combo input allows for flexible installation
- Front-panel LED shines brightly when the speaker is positioned at an ideal angle
M Audio BX8 D3 8 Inch Powered Studio Monitor Specifications
- Frequency Range: 37Hz – 22kHz
- Crossover: 2.0kHz
- Maximum Peak Input Level: -2dBU
- Input Types: Balanced 20kO XLR, and TRS
- Unbalanced: 10kO TS
- Input Sensitivity: -12dBU
- HF Driver Size: 31.8 mm (1.25“)
- LF Driver Size: 203 mm (8“)
- Amplifier Power: 150W Class A/B
- HF Driver Power Amp: 70W
- LF Driver Power Amp: 80W
- Port: Rear internally flared
- Controls: Yes
- Magnetic Shielding: Yes
- AC Input Voltage: 100–120V, 50/60 Hz 220–240V, 50/60 Hz
- Enclosure Construction: MDF
- Enclosure Finish: Black PVC
- Baffle Construction: Injection-molded ABS
- Baffle Finish: Matte black with Soft-touch
- Dimensions (HxWxD): 384 mm x 250mm x 302mm (15.1” x 9.8” x 11.9”)
- Weight: 10.5 kgs (23.1 lbs)
- Display Carton (HxWxD): 398mm x 345mm x 482mm (15.6” x 13.5” x 18.9”)
- Shipping Carton (HxWxD): 412mm x 359mm x 502mm (16.2” x 14” x 19.68”)
- Shipping Weight: 12.8kgs (28.22lbs)
- Configuration: 2-Way bi-amp
- System Type: Active Monitor
- Fuse Rating: 220–240V~ T1AL, 250V 100–120V~ T2AL, 250V
- Power Consumption: 150W
- Shape: Bass-reflex
|
Features
Ruler-Flat Response 52Hz to 20kHz, + 1.5 dB
Benefit: Sound true to actual recording
Benefit: Any pair of speakers is a matched pair
Active Technology
2 FR (Fast Recovery) Series Amplifiers; HF 40W; LF 100W
Benefit: Precise dividing slope, correct phase, and low distortion
Benefit: Minimal chance of speaker damage due to overdriving
Servo Loop Woofer Technology
Electronic control and dampening
Benefit: Speaker output is as true to incoming signal as possible
Frequency Response Controls
80Hz low-cut switch; 3-position live/dead switch (-2bdB, Normal and +2dB)
Benefit: Excellent response in a variety of acoustic environments
Wide Sweet Spot
Custom-designed die-cast wave guide
Benefit: User hears the same thing across a wider range of motion
3-Position Acoustic Space Switch
Compensation in bass response for half-space (-2dB) and quarter-space (-4dB) placement
Benefit: As close-to-flat performance as possible regardless of placement in room
Applications
Professional Recording Studios
Home and Project Studios
Film (THX) and Post Production Studios
Home Theater Installations
Acoustic Performance
Free Field Frequency Response: 52Hz - 20Hz
|
Features of the HR824mk2 Studio Reference Monitor:
- High-resolution Active studio reference monitor
- Ultra-linear frequency response for accurate mix translation
- 8.75 in. high-precision, low-distortion LF transducer
- 1 in. titanium dome, ferrofluid cooled tweeter
- Optimized Waveguide for wide, even sweet zone
- Twin FR Series amps -- 150W for LF / 100W for HF
- Cast aluminum Zero Edge Baffle minimizes diffraction
- Full internal damping eliminates midrange artifacts
- Onboard passive radiator extends bass response to 35Hz
- Acoustic Space, LF roll-off, and HF controls
- Balanced XLR, TRS, and unbalanced RCA inputs
- OmniMount ready for easy wall/ceiling placement
- THX pm3 certified for surround sound applications
- Perfect for High Definition audio, cinema and gaming systems
Dimensions and Weight in PackagingShipping Weight: 41 lbs Shipping Dimensions: 14 x 18 x 22 in
|
Reviews
There are no reviews yet.