FURMAN CLASSIC SERIES PL-PRO DMC 16 AMP POWER CONDITIONER

The Furman PL-PRO DMC is the latest generation of Furman's 16 amp power conditioners, featuring 8 rear-panel mains outlets and one front-panel mains outlet, Furman's exclusive Series Multi-Stage Protection Plus SMP+ with Linear Filtering Technology LiFT and Extreme Voltage Shutdown EVS for ultra-reliable protection of your gear. The PL-PRO DMC also incorporates a USB port on the front panel to allow for the charging of MP3 players and other such devices that can be recharged via USB.

The Furman PL-Pro DMC power conditioner features dimmable LED rack lights that produce virtually no heat and provide an extremely long lifespan. A rear-mounted BNC jack accepts any standard 12VAC, 0.5A gooseneck lamp for rear rack illumination, as well as a front-panel switch which controls the gooseneck's operation. A front-panel mounted master power switch is protected by a hinged cover, preventing accidental disconnection of AC power to the unit's outlets.

The Furman PL-Pro DMC power conditioner has a front-panel digital voltmeter, and the circuit breaker power switch can be easily reset should the unit be overloaded. Portable music players are becoming a staple on live sound gigs and the PL-PRO DMC includes a front-panel USB port for charging and powering of these devices.

Traditional surge suppression circuits "sacrifice" themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so with SMP+. With the Furman PL-PRO DMC's SMP+, damaging transient voltages are safely absorbed, clamped and dissipated. No sacrificed parts, no service calls, no down time.

FURMAN PL-PRO DMC E CLASSIC SERIES POWER CONDITIONER FEATURES

Retractable LED rack lights with on/off/dimmer control.
Isolated outlet banks to minimize inter-component interference and noise contamination.
BNC back panel connector for gooseneck lamp with front-panel switch.
Maintenance-free surge suppression thanks to Series Multi-Stage Protection Plus (SMP+) circuit with extreme voltage shutdown.
8 rear-panel outlets and one front-panel outlet.
LED status indicators warn you when voltage is outside of nominal range or when protection has been compromised.
Front panel USB charger for small USB devices.
Three widely spaced outlets accommodate bulky AC power transformers.
LiFT Linear Filtering Technology with zero ground contamination.
Advanced EVS circuitry detects dangerous voltage irregularities and safely powers down itself and connected equipment in unsafe conditions.
Segmented LED Voltmeter monitors and displays incoming line voltage.
16 amp rating, with high-inrush thermal circuit breaker for added protection.
Two, pull out multi-LED, dimmable lamps.
One rack unit space.

AC Current Capactiy: 
Input - 10 Amp capacity required
Output - 10 Amps RMS (both outlets combined) 

Linear Noise Attenuation: 
> 40 dB @ 100 kHz.
>50 dB @ 500kHz
(Linear attenuation curve from 0.05 to 100 ohms line impedance) 

Transient Voltage Surge Suppression: 
230 VAC - Series Multi-Stage Protection
Non-Sacrificial with Zero Ground Contamination. 
376V peak clamping @ 6000V 3000A input
Extreme Voltage Shutdown (>135 VAC) 

Extreme Voltage Shutdown: 275 VAC (Auto-Reset) 

Dimensions: 1.75ʼ H x 5ʼ W x 8.5ʼ D 

Weight: 3 lbs. 

Safety Agency Listing: CE

• Rated @ 250 V, 16 A
• 16 x 45° angled outlets
• 8 front and 8 rear outlets with individual on/off switches
• Overload protection

The 874716 provides 16 type F grounded outlets in a 19" aluminum enclosure with permanently attached 2 m cord and angled CEE 7/7 power plug. The 1 U rackmount power strip features individual illuminating on/off switches for the 8 front and rear outlets each plus overload protection with individual circuit breakers and reset buttons.

Furman M10Lx E Power Conditioner form the Merit Series Power Conditioners is the perfect low cost AC power solution for any rack mount system. Install an Furman M10LxE in to the top slot of your rack, and the 10 switched outlets in the rear panel will power up and protect all your equipment up to a 10 amp load. It not only protects anything plugged into it from spikes and surges, but also has a built in AC noise filter to rid the system of RFI / EMI interference.

TheFurman M-10Lx E also features two slide out, swivelling light fixtures to provide discreet illumination of your equipment. A dimmer knob allows the user to adjust the level of illumination. Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.

Features

• AC Noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
• Spike & surge protection ensures equipment stays safe and your power stays clean
• 10 rear panel outlets, with front panel convenience outlet
• 10 amp rating, with circuit breaker
• Two retractable LED light fixtures with dimmer control for convenient rack illumination
• Three year warranty

Specification

• Maximum Output Current: 10 amps
• Lamps: LED
• Operating Voltage: 230VAC 50Hz
• Spike Protection Mode: Line to neutral
• Peak Impulse Current: 12,000 amps
• Maximum Continuous Operating Voltage: 650 Volts
• Noise Attenuation: Transverse mode: Greater than 20dB, 1.5Mhz to 200 Mhz
• Dimensions (inches, HxWxD): 1.75 x 19 x 7.5
• Weight: 2.3 kg

Designed for the most critical, ultra-low noise installations, the P-2300 IT E supplies up to 10 amps of balanced AC power ideal for recording studios, broadcast stations, video production facilities, or any environment requiring a pristine, studio-quality signal-to-noise ratio.

The P-2300 IT E features a specially wound and shielded toroidal balanced isolation transformer specifically designed to reduce hum pickup by sensitive equipment when ultra-low-noise is a must. Additionally, Furmanʼs revolutionary Series Multi-Stage Protection (SMP), Extreme Voltage Shutdown (EVS), and Linear Filtering Technology (LiFT) are combined to ensure what our customers have grown to expect from Furman — uncompromised protection and purification.

Symmetrically Balanced Power
Furmanʼs Symmetrically Balanced Power provides a virtually invisible noise floor by reworking incoming AC into a balanced power output. Similar to a balanced audio signal, balanced power splits a single voltage path into two separate voltage paths which are in opposite polarity, cancelling out noise and distortion on the incoming line. This noise reduction is extraordinarily efficient and linear across a huge frequency range, unveiling harmonics, overtones and low-level signals commonly masked by AC line noise.

Unmatched Protection
Furmanʼs SMP and EVS circuitry safeguards equipment from transient voltage events (such as surges and spikes), as well as sustained overvoltage conditions (commonly caused by wiring faults), for complete and comprehensive protection of sensitive equipment.

Innovative Convenience and Monitoring Features
The P-2300 IT Eʼs front panel LED window displays incoming voltage or output current, with ”Protection OK”, ”Extreme Voltage” and color-coded ”Voltage Range” indicators for comprehensive power monitoring. A front panel USB outlet charges most personal media devices and cell phones right at your equipment rack. Universal IEC C-13 receptacles (12 rear panel, 2 front panel) and a removable power cord ensure compatibility with regional power requirements.

SPECIFICATIONS:

The most widely recognized and trusted name in AC power conditioning is proud to introduce the PS-8R E II power conditioner / sequencer, featuring Furman's revolutionary SMP technology. Furman's Series Multi-Stage Protection (SMP) circuit also features our exclusive Linear Filter Technology (LiFT) with Extreme Voltage Shutdown (EVS) and a high current TVZ-MOV. Together, these technologies comprise what is, without question, the world's most advanced and comprehensive transient voltage surge suppressor

SMP (Series Multi-Stage Protection Plus)
Furmanʼs SMP surge suppression virtually eliminates service calls. Traditional surge suppression circuits sacrifice themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so with SMP. With Furmanʼs SMP, damaging transient voltages are safely absorbed, clamped and dissipated - no sacrificed parts, no service calls, no down time.

Unique to Furmanʼs SMP is its unparalleled clamping voltage, even when tested beyond the grueling specifications of - USA/CIDAʼs A-1-1 test. While other designs offer clamping voltages that are well above 300VAC peak (far beyond long accepted professional standards), Furmanʼs SMP clamps at 376VAC peak, 266 VAC RMS even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furmanʼs SMP technology.

LiFT (Linear Filtering Technology)
Unfortunately, traditional AC filter/conditioners have been designed for unrealistic laboratory conditions. Prior technologies could actually harm audio and video performance more than they help, due to the resonant peaking of their antiquated, non-linear designs. Under certain conditions, these designs can actually add more than 10 dB of noise to the incoming AC line! Worse still, lost digital data, the need to reboot digital presets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground. Furmanʼs SMP with LiFT takes another approach, ensuring optimal performance through linear filtering and no leakage to ground.

E.V.S. (Extreme Voltage Shutdown)
Furmanʼs trusted overvoltage circuitry protects against all too frequent accidental connections to high voltages by shutting off the incoming power until the overvoltage condition is corrected.

Rear Panel BNC Connector
For rear panel illumination, a BNC connector is provided for connection of any standard gooseneck lamp, such as the Furman GN-LED or GN-I (sold seperately).

Sequencing
The PS-8R E II Power Conditioner/Sequencers is capable of powering up a rack full of equipment in a 3-step delayed sequence. The sequence is reversed for power-down. The sequence can be initiated with either momentary or maintained switches, locally or remotely. A duplex outlet is provided for each delay step. One or more Furman PS-8R E IIʼs may be installed in remote locations and operated via low-voltage wiring.

• SMP provides the highest level of protection available
• LiFT significantly reduces AC line noise
• E.V.S. protects equipment from dangerous overvoltage conditions
• Zero ground contamination circuitry assures delivery of pure AC
• Six sequenced rear panel outlets (in 3 groups), two switched rear panel outlets, and one front panel switched outlet
• Momentary and Maintained sequencing via rear panel terminal block or front panel switch
• 10 amp rating with circuit breaker
• BNC connector on the rear panel allows connection of any standard gooseneck lamp
• Three year limited warranty

SPECIFICATIONS: