Used in good condition GR0468 GOBOSTORM PLUS 575W GOBOSTORM PLUS is a fully weatherproofed (IP65) outdoor use high power zoom optics gobo projector, able to project changing images plus colour changes, which can be combined with other special effects. Using a 575watt metal halide lamp with a high precision optical group, GOBOSTORM PLUS can project […]
GOBOSTORM PLUS is a fully weatherproofed (IP65) outdoor use high power zoom optics gobo projector, able to project changing images plus colour changes, which can be combined with other special effects. Using a 575watt metal halide lamp with a high precision optical group, GOBOSTORM PLUS can project images with high brightness and clarity. The high power lamp gives the ability to project at long distances or to create enormous impact when used for closer projections. GOBOSTORM PLUS has on board DMX control for the indexable rotatable gobo wheel, and for the eight colour wheel. The special effects (three prisms, five prisms, distortion and frost filters) allow creativity with abstract or pattern images and are also controllable on board, as is the strobe/blackout and mechanical dimmer. All these functions can alternatively be operated from an external digital controller for a maximum of 6 channels of DMX. The zoom and focus are manually set, and the projection angle range can be extended by the narrow and wide lens options. This gives much flexibility with image size and projection distance. GOBOSTORM PLUS is designed for easy installation and programming, together with reliability even in the harshest weather conditions. This is a new opportunity for advertising, logo or image creation, together with colour, in any outdoor urban environment.
LAMP SOURCE
Metal Halide lamp MSD 575, 575W, 43.000 lm, 6.000 K
Average rated life 3.000 hours, GX9.5 base (ordering code LP0997 – suggested)
Metal Halide lamp MSR 575, 575W, 49.000 lm, 7.200 K
Average rated life 1.000 hours, GX9.5 base (ordering code LP0504 – optional)
OPTICAL GROUP
The optical system utilises an aluminium parabolic reflector to produce a projection angle between 10° and 20° by the manual zoom and focus adjustment
IMAGE
1 rotating gobo wheel hosts either 5 metal or 5 glass gobos (D Size – Ext 53,3 – Int 40)
Effects wheel: 3-facet prism, 5-facet prism, 3-D prism, 1 frost filter
COLOUR CHANGER SYSTEM
1 rotating wheel for 8 different colours + white (including UV filter)
BLACK-OUT
Variable speed black out effect.
Linear 0-100% dimmer function.
9 FpS strobe maximum speed.
DIGITAL CONTROL
On-board control panel for digital data assignment and stand alone operation control
Master and Slave
6 channels of standard DMX 512
Test mode for troubleshooting operation
Wireless DMX control system (ordering code AD4120, AD4122, AD4124)
Programming software with USB compatible download IP65 box (ordering code AD4118)
Enhanced programming software with ETHERNET compatible download
IP65 box (ordering code AD4119)
ELECTRICAL SPECIFICATIONS
Power supply:
200-220 / 230-250V / 50-60Hz / 4.3A @ 230V
Power consumption: 730W
Self resetting fuse protection
Electrical class: I
Meets CE safety standards
HOUSING
Pressure die cast aluminium body, with an adjustable mounting yoke.
Scratch resistant polyester grey finish, which protects against
UV deterioration and general corrosion
Front tempered glass shock resistant
Convection cooling plus internal axial fans keep the level of heat within the unit constant and help dissipation through the body
Certified IP65 protection rating
Shock resistance: 0,8J
WEIGHT
Unit = 25.4 Kg
Ballast = 10 Kg
PACKING SIZE
Volume: 0,467 m3
Weight: 38,7 Kg
Size: L76 x W76 x H81 cm
Boxes: 1 cardboard box
Weight
35.40 kg
Reviews
There are no reviews yet.
Be the first to review “GRIVEN GR 468 Gobostorm Plus Projector USED” Cancel reply
GOBOSTORM PLUS is a fully weatherproofed (IP65) outdoor use high power zoom optics gobo projector, able to project changing images plus colour changes, which can be combined with other special effects. Using a 575watt metal halide lamp with a high precision optical group, GOBOSTORM PLUS can project images with high brightness and clarity. The high power lamp gives the ability to project at long distances or to create enormous impact when used for closer projections. GOBOSTORM PLUS has on board DMX control for the indexable rotatable gobo wheel, and for the eight colour wheel. The special effects (three prisms, five prisms, distortion and frost filters) allow creativity with abstract or pattern images and are also controllable on board, as is the strobe/blackout and mechanical dimmer. All these functions can alternatively be operated from an external digital controller for a maximum of 6 channels of DMX. The zoom and focus are manually set, and the projection angle range can be extended by the narrow and wide lens options. This gives much flexibility with image size and projection distance. GOBOSTORM PLUS is designed for easy installation and programming, together with reliability even in the harshest weather conditions. This is a new opportunity for advertising, logo or image creation, together with colour, in any outdoor urban environment.
LAMP SOURCE
Metal Halide lamp MSD 575, 575W, 43.000 lm, 6.000 K
Average rated life 3.000 hours, GX9.5 base (ordering code LP0997 - suggested)
Metal Halide lamp MSR 575, 575W, 49.000 lm, 7.200 K
Average rated life 1.000 hours, GX9.5 base (ordering code LP0504 - optional)
OPTICAL GROUP
The optical system utilises an aluminium parabolic reflector to produce a projection angle between 10° and 20° by the manual zoom and focus adjustment
IMAGE
1 rotating gobo wheel hosts either 5 metal or 5 glass gobos (D Size - Ext 53,3 - Int 40)
Effects wheel: 3-facet prism, 5-facet prism, 3-D prism, 1 frost filter
COLOUR CHANGER SYSTEM
1 rotating wheel for 8 different colours + white (including UV filter)
BLACK-OUT
Variable speed black out effect.
Linear 0-100% dimmer function.
9 FpS strobe maximum speed.
DIGITAL CONTROL
On-board control panel for digital data assignment and stand alone operation control
Master and Slave
6 channels of standard DMX 512
Test mode for troubleshooting operation
Wireless DMX control system (ordering code AD4120, AD4122, AD4124)
Programming software with USB compatible download IP65 box (ordering code AD4118)
Enhanced programming software with ETHERNET compatible download
IP65 box (ordering code AD4119)
ELECTRICAL SPECIFICATIONS
Power supply:
200-220 / 230-250V / 50-60Hz / 4.3A @ 230V
Power consumption: 730W
Self resetting fuse protection
Electrical class: I
Meets CE safety standards
HOUSING
Pressure die cast aluminium body, with an adjustable mounting yoke.
Scratch resistant polyester grey finish, which protects against
UV deterioration and general corrosion
Front tempered glass shock resistant
Convection cooling plus internal axial fans keep the level of heat within the unit constant and help dissipation through the body
Certified IP65 protection rating
Shock resistance: 0,8J
WEIGHT
Unit = 25.4 Kg
Ballast = 10 Kg
PACKING SIZE
Volume: 0,467 m3
Weight: 38,7 Kg
Size: L76 x W76 x H81 cm
Boxes: 1 cardboard box
Griven GR 456 Kolorado MK3 2500W
Architectural Colour Changer
KOLORADO MK3 2500 utilizes an HMI 2500/GS lamp (Sfa 21 ?12 base) and shares a similar wide angle output and the CYM colour mixing system of its small brother KOLORADO MK3 1800. However it offers, with its newly conceived patented optical system an extremely powerful light output, giving the ability to cover greater areas or distances, and indeed effective use in a higher level of ambient light, than the 1800W version. Like this version, Kolorado MK2 2500 has a uniform colour coverage, creating superb effects. The detachable ballast unit is separable from the main unit by up to 20m, and this and the relatively resultant relatively compact size of the main unit can greatly facilitate both portable use and fixed installations. Control is the same as the 1800W, with selectable inbuilt speed controllable pre-programmed colour blend sequences, or full control from standard DMX512, in which mode the lamp on/off can be remotely operated. A stand by function reduces power consumption automatically by 33% after black-out have been activated for more than 15 seconds. The aluminium and galvanized steel body, with certificated IP44 weather protection, is coated with black epoxy powder paint for exterior use. A new version of this unit using the 2000-hour MSA 2500W lamp is now available. Existing KOLORADO MK3 2500W
DMX channels: 5 Stand alone: Master / Slave: On Board Control:
- HOUSING
Weather protection: IP44 Cooling: FV
- SIZE (mm)
Height: 821 Width: 620 Depth: 623
- - WEIGHT (kg)
Main fixture: 77,5
- POWER
Input (V): 230-240 HZ: 50-60 AMP: 9
Griven AD-3436 Dolomite CYM 600 575W
STELVIO CYM 300, another newcomer to the architectural range, uses a new lamp, the MSD 250, which due to its short arc produces even more light output than from the HQI-TS used in the Vesuvio OS CYM 250. This projector is equipped with an optical system that produces a long throw beam of 33?°. Alternative beam angles can be achieved by optional expansion filters. The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The colour mixing system with cyan, yellow and magenta dichroic filters creates virtually unlimited colour hues, coupled with smooth blends between colour changes. Colour sequences can be selected from a pre-programmed internal controller, with multiple unit synchronisation possible, or controlled from the IP65 CYM dedicated controller or from any DMX512 control system. Remote lamp ON/OFF control and dimmer/strobe/black out functions now available. A version of the Stelvio - STELVIO CYM 300 HFT- is available fitted with a wireless DMX receiver, for trouble free control of large or otherwise awkward installations where the running of DMX signal cable from the control system to the projector could be problematic. This system requires the use of Griven???s wireless DMX transmitter. See dedicated section for more information.
LAMP 250W, 18.000 lm, 6.700?° K Discharge lamp MSD 250 Average rated life 3.000 hours GY 9,5 base. Ordering code LP0205 Available on request: MSA 300 lamp (250W), 4000/6000 hours, 16.000 lm, 6000?° K
STANDARDS Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion. Front tempered glass shock resistant. Certified IP65 weather protection Electrical class: I Shock resistance: 0,8J. Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.
OPTICAL GROUP The optical system utilises an aluminium ellipsoidal reflector and produces a soft edge beam of approximately 33?°. Additional filters are available for alternative beam adjustments.
COLOUR CHANGER SYSTEM CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.
BLACK-OUT Variable speed black out effect. Linear 0-100% dimmer function. 2,6 FpS strobe maximum speed.
CONTROL Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX 512 controller can be linked five channels of DMX per projector. Remote lamp on/off function.
COOLING An internal axial fan 80x80 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.
Cameo FLAT PRO FLOOD 600 IP65 Outdoor Flood Light with 9x12W RGBWA+UV 6-In-1 LEDs
Highly flexible IP65 outdoor flood light
Ultra flexible colour mixing with rich solid, warm pastel and UV colours
Flicker free
6 modes of DMX control plus master, slave and standalone applications
4-button display for intuitive operation
Security lock against unauthorized menu access
Durable compact size metal enclosure
Screw connectors for DMX and mains input and output
Incl. universal bracket
The Cameo FLAT PRO series FLOOD 600 IP65 is a compact RDM enabled outdoor flood light equipped with nine 12 watt 6-in-1 LEDs generating rich RGBWA colours, soft pastel hues and intense UV effects. The IP65 rated fixture sports convection cooling, a 40° beam angle and 3,000 Hz refresh rate for flicker free performance.
The hardwearing metal enclosure features 3-pin screw connectors for DMX and mains input and output plus a backlit 4-button display for easy, intuitive operation while a security lock prevents unauthorized menu access. The Cameo FLOOD 600 IP65 provides 6 modes of DMX control with dimmer and strobe functions, colour temperature correction and master, slave and standalone applications.
The multi-voltage fixture operates on 100 – 240 V AC and comes with an adjustable universal bracket for floor placement and multiple mounting options. Barn doors are available as accessory.
Product type
LED PAR Lighting
Type
Outdoor
Colour spectrum
RGBWA+UV
Number of LEDs
9 x 6
LED type
12W (approx. 50000 operating hours)
Refresh rate
3000 Hz
Dispersion
40 °
DMX input
3-pin special connector, screwable
DMX output
3-pin special connector, screwable
DMX mode
11-channel , 2-channel , 3-channel 1 , 3-channel 2 , 6-channel , 9-channel
DMX Functions
colour fade , colour jump , colour macro , master dimmer , RGBWA+UV , strobe
Standalone modes
auto programs , colour fade , colour jump , colour macro , master / slave mode , static colour
Controls
Enter , mode , Value Down , Value Up
Indicators
backlit LCD
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power consumption
90 W
Power connector
3-pin special connector, screwable
Housing material
metal
Cabinet colour
Black
Protection class IP
65
Cooling
Convection
Illuminance
7500 lx @ 1 m
Dimensions without mounting bracket
Width
180 mm
Height
180 mm
Length
120 mm
Weight
3,2 kg
Griven AD-3462 EVEREST CYM 900 700W
EVEREST CYM 900 is another of the 2004 newcomers to theexpanding Architectural Dimension range. This unit uses the samehousing as the Colosseo OS CYM 1000, and, due to the greateroutput of the MSD700 lamp, is an even more powerful alternativeto the Colosseo. Standard 7?? optics will produce an ultra narrowbeam for great distances, the only trade off being a less smoothmix of colour changing at closer projection distances, due to themore focused image. This ultra bright, ultra narrow beam ability isprobably unique from an IP 65 rated colour changer and will givelighting designers and specifiers opportunities not previously availableto them. However, the standard front diffusion glass and the manuallyadjustable zoom between 17?? and 24?? make the projector highlysuitable for long distance coverage, as well. Other beam anglescan also be achieved with optional additional filters. Colour sequencesand blends can be selected from a pre-programmed internalcontroller, with multiple unit synchronisation possible, or controlledfrom the IP65 CYM dedicated controller or from any DMX512 controlsystem. A version of the Everest - EVEREST CYM 900 HFT - isavailable fitted with a wireless DMX receiver, for trouble free controlof large or otherwise awkward installations where the running ofDMX signal cable from the control system to the projector could beproblematic. This system requires the use of Griven?fs wireless DMXtransmitter. See dedicated section for more information.
LAMP 700 W, 50.500 lm, 6.000 ?°K Discharge lamp MSD 700 Average rated life 3.000 hours G 22 base Ordering code LP0700
STANDARDS Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion. Front tempered glass shock resistant. Certified IP65 weather protection Electrical class: I Shock resistance: 0,8J. Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.
OPTICAL GROUP The optical system utilises an aluminium parabolic reflector to produce a 7?° hard edge beam. A soft edge beam between 17?° and 24?° is available by the intasllation of an additional diffusion glass included and a manual zoom adjustment. Additional filters are available for alternative beam adjustments.
COLOUR CHANGER SYSTEM CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.
BLACK-OUT Variable speed black out effect. Linear 0-100% dimmer function. 2,6 FpS strobe maximum speed.
LAMP Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX512 controller can be linked five channels of DMX per projector. Remote lamp on/off function.
COOLING An internal axial fan 120x120 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.
Cameo THUNDER WASH 100 RGB
3 in 1 Strobe, Blinder and Wash Light 132 x 0.2 W RGB
Strobe, Blinder and Wash Light all in one
132 RGB SMD LEDs
1 to 30 flashes/sec adjustable
DMX, Sound- and manual control
Master, Slave and Standalone operation
Rugged metal housing with universal mounting bracket
Low power consumption
The Thunder Wash 100 RGB is a Strobe, Blinder and Wash Light all in one. It is equipped with 132 RGB 0.2 Watt SMD LEDs, with an 80° beam angle and features a compact black metal housing with universal mounting bracket.
The Thunder Wash 100 RGB comes with 3-pin XLR sockets for DMX input and output, 8 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.