Content |
Used in good condition
GR0468 GOBOSTORM PLUS 575W
GOBOSTORM PLUS is a fully weatherproofed (IP65) outdoor use high power zoom optics gobo projector, able to project changing images plus colour changes, which can be combined with other special effects. Using a 575watt metal halide lamp with a high precision optical group, GOBOSTORM PLUS can project images with high brightness and clarity. The high power lamp gives the ability to project at long distances or to create enormous impact when used for closer projections. GOBOSTORM PLUS has on board DMX control for the indexable rotatable gobo wheel, and for the eight colour wheel. The special effects (three prisms, five prisms, distortion and frost filters) allow creativity with abstract or pattern images and are also controllable on board, as is the strobe/blackout and mechanical dimmer. All these functions can alternatively be operated from an external digital controller for a maximum of 6 channels of DMX. The zoom and focus are manually set, and the projection angle range can be extended by the narrow and wide lens options. This gives much flexibility with image size and projection distance. GOBOSTORM PLUS is designed for easy installation and programming, together with reliability even in the harshest weather conditions. This is a new opportunity for advertising, logo or image creation, together with colour, in any outdoor urban environment.
LAMP SOURCE
| Metal Halide lamp MSD 575, 575W, 43.000 lm, 6.000 K
Average rated life 3.000 hours, GX9.5 base (ordering code LP0997 - suggested)
Metal Halide lamp MSR 575, 575W, 49.000 lm, 7.200 K
Average rated life 1.000 hours, GX9.5 base (ordering code LP0504 - optional) |
OPTICAL GROUP | The optical system utilises an aluminium parabolic reflector to produce a projection angle between 10° and 20° by the manual zoom and focus adjustment |
IMAGE | 1 rotating gobo wheel hosts either 5 metal or 5 glass gobos (D Size - Ext 53,3 - Int 40)
Effects wheel: 3-facet prism, 5-facet prism, 3-D prism, 1 frost filter |
COLOUR CHANGER SYSTEM | 1 rotating wheel for 8 different colours + white (including UV filter) |
BLACK-OUT | Variable speed black out effect.
Linear 0-100% dimmer function.
9 FpS strobe maximum speed. |
DIGITAL CONTROL | On-board control panel for digital data assignment and stand alone operation control
Master and Slave
6 channels of standard DMX 512
Test mode for troubleshooting operation
Wireless DMX control system (ordering code AD4120, AD4122, AD4124)
Programming software with USB compatible download IP65 box (ordering code AD4118)
Enhanced programming software with ETHERNET compatible download
IP65 box (ordering code AD4119) |
ELECTRICAL SPECIFICATIONS | Power supply:
200-220 / 230-250V / 50-60Hz / 4.3A @ 230V
Power consumption: 730W
Self resetting fuse protection
Electrical class: I
Meets CE safety standards |
HOUSING | Pressure die cast aluminium body, with an adjustable mounting yoke.
Scratch resistant polyester grey finish, which protects against
UV deterioration and general corrosion
Front tempered glass shock resistant
Convection cooling plus internal axial fans keep the level of heat within the unit constant and help dissipation through the body
Certified IP65 protection rating
Shock resistance: 0,8J |
WEIGHT | Unit = 25.4 Kg
Ballast = 10 Kg |
PACKING SIZE
| Volume: 0,467 m3
Weight: 38,7 Kg
Size: L76 x W76 x H81 cm
Boxes: 1 cardboard box
|
|
Griven GR 456 Kolorado MK3 2500W
Architectural Colour Changer
KOLORADO MK3 2500 utilizes an HMI 2500/GS lamp (Sfa 21 ?12 base) and shares a similar wide angle output and the CYM colour mixing system of its small brother KOLORADO MK3 1800. However it offers, with its newly conceived patented optical system an extremely powerful light output, giving the ability to cover greater areas or distances, and indeed effective use in a higher level of ambient light, than the 1800W version. Like this version, Kolorado MK2 2500 has a uniform colour coverage, creating superb effects. The detachable ballast unit is separable from the main unit by up to 20m, and this and the relatively resultant relatively compact size of the main unit can greatly facilitate both portable use and fixed installations. Control is the same as the 1800W, with selectable inbuilt speed controllable pre-programmed colour blend sequences, or full control from standard DMX512, in which mode the lamp on/off can be remotely operated. A stand by function reduces power consumption automatically by 33% after black-out have been activated for more than 15 seconds. The aluminium and galvanized steel body, with certificated IP44 weather protection, is coated with black epoxy powder paint for exterior use. A new version of this unit using the 2000-hour MSA 2500W lamp is now available. Existing KOLORADO MK3 2500W
LAMP SOURCE Type: HMI, MSA (L/L) Wattage (W): 2500 Base: SFA 21-12, SPECIAL Lamp life (h): 500, 2000 (L/L) Lumens: 240.000, 260.000 (L/L) - COLOURS Color (MIX): - PROJECTION Angle: 74~{!c~} (standard) 34~{!c~}- 93~{!c~} (optional) Dimmer: Mechanical Strobe: 2,6 Fps - OPERATION DMX channels: 5 Stand alone: Master / Slave: On Board Control: - HOUSING Weather protection: IP44 Cooling: FV - SIZE (mm) Height: 821 Width: 620 Depth: 623 - - WEIGHT (kg) Main fixture: 77,5 - POWER Input (V): 230-240 HZ: 50-60 AMP: 9 |
Griven AD-3252 Colosseo OS CYM 1000 1000W
The high light output afforded by the HQI 1000W lamp means that COLOSSEO OS CYM 1000 can be used to light up large buildings, giving even colour coverage over a large area. The projector can be mounted in any orientation, which means, for example, that a tall building could be lit from top and bottom, or, using two pairs of units, from the middle of both sides facing towards the opposite corners. Alternative beam angles can be achieved by optional expansion filters. The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The colour mixing system with cyan, yellow, and magenta dichroic filters creates virtually unlimited colour hues, coupled with smooth blends between colour changes. Colour sequences can be selected from a pre-programmed internal controller with multiple unit synchronization possible, or controlled from the IP65 CYM dedicated controller, or from any DMX 512 control system. A version of the Colosseo - COLOSSEO OS CYM 1000 HFT - is avaialble fitted with a wireless DMX receiver for trouble free control of large or otherwise awkward installations where the running of DMX signal cable from the control system to the projector could be problematic. This system requires the use of Griven's wireless DMX transmitter. See dedicated section for more information.
LAMP 1000W, 90.000 lm, 5.900?°K Metal halide lamp HQI-TS/D/S 1000 Average rated life 6.000 hours Special base. Ordering code LP1008
STANDARDS Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion. Front tempered glass shock resistant. Certified IP65 weather protection Electrical class: I . Shock resistance: 0,8J. Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.
OPTICAL GROUP The optical system utilises an aluminium parabolic reflector and produces a soft edge beam of approximately 35?°. Additional filters are available for alternative beam adjustments.
COLOUR CHANGER SYSTEM CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.
BLACK-OUT A simulation of a black-out effect is achieved by the simultaneous closing of all dichroic filters, which is controlled from an external DMX controller.
CONTROL Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX 512 controller can be linked - three channels of DMX per projector.
COOLING An internal axial fan 120x120 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.
POWER SUPPLY 230V, 50Hz, 1,7 Amp. |
Griven AD-3462 EVEREST CYM 900 700W
EVEREST CYM 900 is another of the 2004 newcomers to theexpanding Architectural Dimension range. This unit uses the samehousing as the Colosseo OS CYM 1000, and, due to the greateroutput of the MSD700 lamp, is an even more powerful alternativeto the Colosseo. Standard 7?? optics will produce an ultra narrowbeam for great distances, the only trade off being a less smoothmix of colour changing at closer projection distances, due to themore focused image. This ultra bright, ultra narrow beam ability isprobably unique from an IP 65 rated colour changer and will givelighting designers and specifiers opportunities not previously availableto them. However, the standard front diffusion glass and the manuallyadjustable zoom between 17?? and 24?? make the projector highlysuitable for long distance coverage, as well. Other beam anglescan also be achieved with optional additional filters. Colour sequencesand blends can be selected from a pre-programmed internalcontroller, with multiple unit synchronisation possible, or controlledfrom the IP65 CYM dedicated controller or from any DMX512 controlsystem. A version of the Everest - EVEREST CYM 900 HFT - isavailable fitted with a wireless DMX receiver, for trouble free controlof large or otherwise awkward installations where the running ofDMX signal cable from the control system to the projector could beproblematic. This system requires the use of Griven?fs wireless DMXtransmitter. See dedicated section for more information.
LAMP 700 W, 50.500 lm, 6.000 ?°K Discharge lamp MSD 700 Average rated life 3.000 hours G 22 base Ordering code LP0700
STANDARDS Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion. Front tempered glass shock resistant. Certified IP65 weather protection Electrical class: I Shock resistance: 0,8J. Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.
OPTICAL GROUP The optical system utilises an aluminium parabolic reflector to produce a 7?° hard edge beam. A soft edge beam between 17?° and 24?° is available by the intasllation of an additional diffusion glass included and a manual zoom adjustment. Additional filters are available for alternative beam adjustments.
COLOUR CHANGER SYSTEM CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.
BLACK-OUT Variable speed black out effect. Linear 0-100% dimmer function. 2,6 FpS strobe maximum speed.
LAMP Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX512 controller can be linked five channels of DMX per projector. Remote lamp on/off function.
COOLING An internal axial fan 120x120 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.
POWER SUPPLY 230 V, 50 Hz, 5,8 Amp |
GR0467 GOBOSTORM 575W
GOBOSTORM is a fully weatherproofed (IP65) outdoor use high power zoom optics gobo projector. Using a 575W metal halide lamp with a high precision optical group, GOBOSTORM can project images with high brightness and clarity. The high power lamp gives the ability to project at long distances or to create enormous impact when used for closer projections. GOBOSTORM has on-board dip-switch panel for digital data assignment and stand alone operation control. These functions can alternatively be operated from an external digital controller for a maximum of 1 channel of DMX. The zoom and focus are manually set and the projection angle range can be extended by the narrow and wide lens options. This gives much flexibility with image size and projection distance. GOBOSTORM is designed for easy installation and programming, together with reliability even in the harshest weather conditions. This is a new opportunity for advertising, logo or image creation, in any outdoor urban environment.
LAMP SOURCE
| Metal Halide lamp MSD 575, 575W, 43.000 lm, 6.000 K
Average rated life 3.000 hours, GX9.5 base (ordering code LP0997 - suggested)
Metal Halide lamp MSR 575, 575W, 49.000 lm, 7.200 K
Average rated life 1.000 hours, GX9.5 base (ordering code LP0504 - optional) |
OPTICAL GROUP
| The optical system utilises an aluminium parabolic reflector to produce a projection angle between 10° and 20° by the manual zoom and focus adjustment
|
IMAGE
| One rotating gobo slot hosts either metal or glass gobos (D size - Ext 53,3 - Int 40 mm)
One dichroic filter can also be used in combination with a metal gobo |
DIGITAL CONTROL
| On-board dip-switch panel for digital data assignment and stand alone operation control
1 channel of standard DMX 512
Programming software with USB compatible download IP65 box (ordering code AD4118)
Enhanced programming software with ETHERNET compatible download IP65 box (ordering code AD4119) |
ELECTRICAL SPECIFICATIONS
| Power supply:
200-220 / 230-250V / 50-60Hz / 4.3A @ 230V
Power consumption: 730W
Self resetting fuse protection
Electrical class: I
Meets CE safety standards |
HOUSING
| Pressure die cast aluminium body, with an adjustable mounting yoke
Scratch resistant polyester grey finish, which protects against UV deterioration and general corrosion
Front tempered glass shock resistant
Convection cooling plus an internal axial fan keep the level of heat within the unit constant and help dissipation through the body
Certified IP65 protection rating
Shock resistance: 0,8J |
WEIGHT
| Unit = 22.1 Kg
Ballast = 10 Kg |
PACKING SIZE
| Volume: 0,467 m3
Weight: 38,7 Kg
Size: L76 x W76 x H81 cm
Boxes: 1 cardboard box |
|
Griven AD-3233 Pantheon OS CYM 400 400W
PANTHEON OS CYM 400, which is fitted with a metal halide HQI-TS 400W 6000 hours lamp, is equipped with an optical system that produces a long throw beam of approximately 46? Alternative beam angles can be achieved by optional expansion filters. The high IP65 rating against water and dust ingress means that the unit is suitable for virtually any exterior or interior application and can be mounted in any orientation. The colour mixing system with cyan, yellow and magenta dichroic filters creates virtually unlimited colour hues, coupled with smooth blends between colour changes. Colour sequences can be selected from a pre-programmed internal controller, with multiple unit synchronisation possible, or controlled from the IP65 CYM dedicated controller, or from any DMX512 control system. A version of the Pantheon - PANTHEON OS CYM 400 HFT ?¨C is available fitted with a wireless DMX receiver, for trouble free control of large or otherwise difficult installations where the running of DMX signal cable from the control system to the projector could be problematic. This system requires the use of Griven's wireless DMX transmitter. See dedicated section for more information.
LAMP 400 W, 28.000 lm, 5.600?°K Metal halide lamp HQI-TS 400/D Average rated life 6.000 hours Special base Ordering code LP1006
STANDARDS Pressure diecast aluminium body, with an adjustable mounting yoke. Scratch resistant textured polyester grey finish, which protects against UV deterioration and general corrosion. Front tempered glass shock resistant. Certified IP65 weather protection Electrical class: I Shock resistance: 0,8J. Maximum ambient temperature: 35?°C. Maximum operating temperature: 100?°C. Product in compliance with CEI EN 60598-1 and CEI EN 60598-2-17.
OPTICAL GROUP The optical system utilises an aluminium ellipsoidal reflector and produces a soft edge beam of approximately 35?°. Additional filters are available for alternative beam adjustments.
COLOUR CHANGER SYSTEM CYM colour changer system operated by high precision step motors, whereby the mixing of cyan, yellow and magenta dichroic filters can create virtually any desired colour.
BLACK-OUT A simulation of black-out effect is achieved by the simultaneous closing of all dichroic filters, which is controlled from an external DMX controller.
CONTROL Internal controller with a choice of eight pre-programmed colour change sequences, any of which can be easily selected from a rear mounted dip switch control panel. Master/slave option for multi unit synchronisation. The dedicated IP65 CYM controller gives full remote programmed control, or any DMX512 controller can be linked - three channels of DMX per projector.
COOLING An internal axial fan 80x80 mm keeps the level of heat within the unit constant and helps dissipation through the metal body, which assists lamp life and protects internal components and reflectors from heat damage.
POWER SUPPLY 230 V, 50 Hz, 2,5 Amp |
Reviews
There are no reviews yet.