INTER-M PA-4000 Mixer/Amplifier

Discontinued

312.93 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
– SIX INPUT CHANNELS WITH ADJUSTABLE INPUT SENSITIVITY AND INDIVIDUAL LEVEL CONTROLS Rear-panel level controls adjust each input channel from mic to aux level. – FIVE-BAND GRAPHIC EQUALIZER Five-band graphic equalizer allows you to shape the tonal balance of your program material. – SPEAKER SELECT Six speaker select switches enable you to select any combination […]

 

Read more

– SIX INPUT CHANNELS WITH ADJUSTABLE INPUT SENSITIVITY AND INDIVIDUAL LEVEL CONTROLS

Rear-panel level controls adjust each input channel from mic to aux level.

– FIVE-BAND GRAPHIC EQUALIZER

Five-band graphic equalizer allows you to shape the tonal balance of your program material.

– SPEAKER SELECT

Six speaker select switches enable you to select any combination of up to five speakers.

– PHONO LEVEL INPUT

Switchable input level on channel 6 allows for connection of phono level source.

– ANNOUNCEMENT CHIME AND SIREN

Convenient four-tone chime and electronic siren for use with announcements.

Rated Output (RMS)

PA-2000A: 60W

PA-4000A: 120W

Frequency Response

60Hz-20kHz

Total Harmonic Distortion(T.H.D)

Less than 1%

Signal to Noise Ratio (S/N)

105dB

Graphic Equalizer

(100Hz, 330Hz, 1kHz, 3.3kHz, 10kHz)

±12dB

Input Sensitivity/Impedance

CH1~CH6

-70~-22dB/600Ω

Phono

-54dB/22kΩ

Link In

-20dB/15kΩ

Telephone In

-2dB/600Ω

Amp In

0dB/47kΩ

Speaker Output/Impedance

PA-2000A: 60W: 4Ω, 8Ω, 83Ω(70V), 165Ω(100V)

PA-4000A: 120W: 4Ω, 8Ω, 42Ω(70V), 83Ω(100V)

Amp Out/Impedance

0dB/600Ω

Link Out/Impedance

-6dB/600Ω

Power Source

100–120VAC or 220–240VAC; 50/60Hz

(Supplied AC mains transformer depends on country requirements)

Power Consumption

PA-2000A: 95W

PA-4000A: 120W

Weight

PA-2000A: 10kg/22lb

PA-4000A: 12kg/26lb

Dimensions

PA-2000A: 420(W)x100(H)x320(D)mm/16.5(W)x3.9(H)x12.5(D)in

PA-4000A: 420(W)x133(H)x320(D)mm/16.5(W)x5.2(H)x12.5(D)in

※ Specifications and design subject to change without notice.

Weight 10.00 kg

Reviews

There are no reviews yet.

Be the first to review “INTER-M PA-4000 Mixer/Amplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

INTER-M PA-4000 Mixer/Amplifier removeTOA A-1806 MIXER AMPLIFIER 60W/100V removeINTER-M PAC-5000 Digital Public Address Combination System removeCROWN 160MA 60-Watt Mixer Amplifier removeCrown CDI-2000 2x800W-4Ω Power Amplifier removeTOA A-2030 30 Watt Amplifier remove
NameINTER-M PA-4000 Mixer/Amplifier removeTOA A-1806 MIXER AMPLIFIER 60W/100V removeINTER-M PAC-5000 Digital Public Address Combination System removeCROWN 160MA 60-Watt Mixer Amplifier removeCrown CDI-2000 2x800W-4Ω Power Amplifier removeTOA A-2030 30 Watt Amplifier remove
Image
SKUPA-4000A-1806PAC-5000160MACDI-2000A-2030
Rating
Price 312.93 incl. GR VAT 381.99 incl. GR VAT 1,200.00 incl. GR VAT 481.00 incl. GR VAT 1,688.00 incl. GR VAT 235.00 incl. GR VAT
Stock

Out of stock

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockIn stockIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

- SIX INPUT CHANNELS WITH ADJUSTABLE INPUT SENSITIVITY AND INDIVIDUAL LEVEL CONTROLS

Rear-panel level controls adjust each input channel from mic to aux level.

- FIVE-BAND GRAPHIC EQUALIZER

Five-band graphic equalizer allows you to shape the tonal balance of your program material.

- SPEAKER SELECT

Six speaker select switches enable you to select any combination of up to five speakers.

- PHONO LEVEL INPUT

Switchable input level on channel 6 allows for connection of phono level source.

- ANNOUNCEMENT CHIME AND SIREN

Convenient four-tone chime and electronic siren for use with announcements.

Rated Output (RMS)

PA-2000A: 60W

PA-4000A: 120W

Frequency Response

60Hz-20kHz

Total Harmonic Distortion(T.H.D)

Less than 1%

Signal to Noise Ratio (S/N)

105dB

Graphic Equalizer

(100Hz, 330Hz, 1kHz, 3.3kHz, 10kHz)

±12dB

Input Sensitivity/Impedance

CH1~CH6

-70~-22dB/600Ω

Phono

-54dB/22kΩ

Link In

-20dB/15kΩ

Telephone In

-2dB/600Ω

Amp In

0dB/47kΩ

Speaker Output/Impedance

PA-2000A: 60W: 4Ω, 8Ω, 83Ω(70V), 165Ω(100V)

PA-4000A: 120W: 4Ω, 8Ω, 42Ω(70V), 83Ω(100V)

Amp Out/Impedance

0dB/600Ω

Link Out/Impedance

-6dB/600Ω

Power Source

100–120VAC or 220–240VAC; 50/60Hz

(Supplied AC mains transformer depends on country requirements)

Power Consumption

PA-2000A: 95W

PA-4000A: 120W

Weight

PA-2000A: 10kg/22lb

PA-4000A: 12kg/26lb

Dimensions

PA-2000A: 420(W)x100(H)x320(D)mm/16.5(W)x3.9(H)x12.5(D)in

PA-4000A: 420(W)x133(H)x320(D)mm/16.5(W)x5.2(H)x12.5(D)in

※ Specifications and design subject to change without notice.

Toa A1806 powered mixer is a basic mono/2 zones 60 Watts (100V) PA amplifier with 3 mic channels suited for broadcasting, paging or background music in schools, offices or shops.

 
Weight (KG) 9.4
Size (mm) 420 x 107.7 x 367
Colour Black
Manufacturer warranty (UK) 1 year RTB

- INTEGRATED DIGITAL PA COMBINATION SYSTEM (ALL IN ONE SYSTEM)

- SIMULTANEOUS 2 GROUP DIFFERENT BROADCASTING

- DIGITAL PROCESSING & DIGITAL AMPLIFIER

- CD COPY (EXTEND LIFE-TIME OF CD MECHANISM)

- USB INTERFACE (USB HOST)

POWER AMP

Rated Output

120W + 120W

Input Sensitivity

-10dBV / 10kΩ

S/N

Better than 75dB

Frequency Response

100Hz-18kHz

MIC/LINE 1~5CH

MIC Input Sensitivity

-55dBV / 10kΩ

MIC S/N

Better than 55dB

MIC Frequency Response

120Hz-10kHz

MIC T.H.D

Less than 0.5%

LINE Input Sensitivity

-10dBV / 10kΩ

LINE S/N

Better than 65dB

LINE T.H.D

Less than 0.3%

CD

S/N

Better than 80dB

Frequency Response

100Hz-20kHz

TUNER

S/N

Better than 60dB

Frequency Response

120Hz-12kHz

Power Consumption

170W (1/8 Power)

Weight

16kg/35.3lb

Dimension

482(W)x177(H)x373(D)mm/19(W)x7(H)x15(D)in

※ Specifications and design subject to change without notice.

The Crown® 160MA is a high-value mixer-amplifier for commercial audio. It provides 8-ohm and constant-voltage outputs (70V and 100V). Typical uses are paging, background music, and music-on-hold. The 160MA provides 4 inputs (each with a volume control) and a 60W amplifier output. Other features include priority muting, voice activated muting, phantom power, and Bass and Treble controls.

FEATURES

  • 4 inputs (each with a volume control), and one 60W amplifier output channel
  • Ideal for paging, background music, and music-on-hold
  • Balanced Phoenix-type mic/line input, telephone output, dual RCA stereo music inputs, screw-terminal speaker outputs
  • Priority muting by VOX or external switch
  • Bass and Treble controls on master output
  • Three-Year, No-Fault, Fully Transferable
  • Warranty completely protects your investment and guarantees its specifications

Crown CDi 2000 2x800W-4Ω Power Amplifier

The Crown? CDi 2000 power amplifi er shall be a solid-state two-channel model
with a switch-mode universal power supply.
The outputs shall be usable as dual or bridged-mono modes of operation.
The bridged-mono mode shall bridge the outputs to provide increased output
voltage.
Front panel controls and indicators shall include the following:
Level: Detented rotary level control, one per channel.
Power Switch: On/off switch applies AC power to the amplifi er.
Sel/Prev/Next Buttons: Three buttons near the LCD screen shall be used to
access menu items and front panel lockout.
LCD Screen: Backlit liquid crystal display shows speaker presets and signal
processing.
Signal Indicator: Green LED, one per channel, illuminates when a very low-level
signal is present at input.
?10 Indicator: Green LED fl ashes when output signal exceeds ?10 dB below
clip.
?20 Indicator: Green LED fl ashes when output signal level exceeds ?20 dB
below clip.
Ready Indicator: Green LED, one per channel, illuminates when the amplifi er is
ready to produce audio.
Clip Indicator: Red LED, one per channel, turns on at the threshold of audible
distortion.
Temp Indicator: Red LED, one per channel, illuminates under excessive temperature
conditions.
Power Indicator: Blue LED illuminates when the amplifi er has been turned on
and has power.
Rear panel controls and connectors shall include the following:
AC Line Connector: NEMA 5-15P (15A).
Input Connector: Two 3-pin removable Phoenix-type connectors each accept a
balanced line-level input signal.
Output Connectors: 4-position barrier strip with connectors for dual louspeakers
or bridge-mono loudspeaker. Dual connectors shall work with 2-8 ohm or
70V loads. Bridge-mono connectors shall work with 4-8 ohm or 140V loads.
HiQnet USB Connector: Type B, connects to a USB port on a PC.
The amplifi er shall have the following specifi cations:
Output Power: 2 ohm Dual (per channel): 1,000W with 1% THD, 4 ohm Dual
(per channel): 800W, 8 ohm Dual (per channel) 475W, 4 ohm Bridge-Mono:
2,000W with 1% THD, 8 ohm Bridge-Mono: 1,600W, 70V Dual (per channel):
800W.
Voltage Gain at 1kHz, 8 ohm rated output: 32.9 dB.
Frequency Response: +0/?1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms.
Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Dual
mode, 4 to 16 ohms in Bridge-Mono mode.
Sensitivity: 1.4V.
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz): 100 dB (A
weighted).
Damping Factor: Better than 500 from 20 Hz to 400 Hz.
Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz.
Input Stage: Input is electronically balanced and employs precision 1% resistors.
Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced.
Maximum Input Signal: +22 dBu typical.
AC Line Voltage and Frequency Confi gurations Available: 100V, 120V, 220-240V,
50/60 Hz.
AC Line Current: 6.9A.
At Idle: Draws no more than 90 watts.
Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).
The DSP section shall have the following specifi cations:
Input EQ: 6 parametric fi lters per channel with adjustable Q, ±15 dB boost/cut.
Also adjustable high and low shelving fi lters. This 8-fi lter EQ section can be
bypassed.
Crossover Filters: Highpass and lowpass per channel. Butterworth 6/12/18/24
dB per octave and Linkwitz-Riley 24/48 dB per octave. Also includes ±15 dB
bandpass gain and polarity control.
Output EQ: 8 parametric fi lters per channel with adjustable Q, ±15 dB boost/cut.
This 8-fi lter EQ section can NOT be bypassed. Filters are enabled individually.
Delay: Up to 50 msec total delay per channel.
Output Limiter: Prevents clipping and protects loudspeakers. Choice of ?3, ?6,
or ?12 dB threshold per channel.
Presets: 20 presets. 19 are user-defi nable.
Protection shall include the following:
CDi-Series amplifi ers shall be protected against shorted, open or mismatched
loads; overloaded power supplies; excessive temperature; chain destruction
phenomena; excessive output current, and input overload damage. They also
protect loudspeakers from input/output DC, large or dangerous DC offsets and
turn-on/turn-off transients
The chassis shall be steel. Cooling shall be by a proportional speed fan with
front-to-rear airfl ow.
Dimensions shall be EIA Standard 19-in. rack mount width (EIA RS-310-B), 3.5
in. (8.9 cm) high and 12.25 in. (31.11 cm) deep behind mounting surface.
Net weight shall be 19 lb (8.6 kg). Shipping weight shall be 22 lb (10.0 kg).
The amplifier shall be designated the Crown CDi 2000.

High cost-performance
Suitable for commercial audio systems in schools,
offices, shops, restaurants, factories, houses of worship, and large meeting rooms.
Equipped with balanced mic. inputs for better isolation from external noise, compared to unbalanced inputs.
Improved durability compared with conventional
TOA models.
Flexibility
A wide range of power outputs from 30W to 240W
Offers a comfortable acoustic space thanks to tone
control at bass and treble.
Both AC and DC operation possible
Phantom power provided to MIC1, for supplying
power to a condenser microphone.
Easy to handle
Scratch and fingerprint-resistant finish•Easy and quick volume control with master volume control.

 

Specification
Power Source 220 - 240V AC or 24V DC
Rated Output 30W
Power Consumption 34W (EN60065), 78W(AC operation at rated output, 2A (DC operation at rated output)
Frequency Response 50 - 20,000Hz (+/- 3 dB)
Distortion Under 1% at 1kHz,1/3 rated power
Input MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1)
Output SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:330W (100V)
LOW IMPEDANCE: 4Ω (11V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack
Phnatom Powe DC + 21V (MIC 1)
S/N Ratio Over 60dB
Tone Control Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz
Muting MIC1: Mutes other signals by 0 - 30 dB attenuation
Indicator Power signal, peak
Finish Panel: ABS resin, black/Case: Steel plate, black
Dimensions 420 (W) x 100.9 (H) x 280.2 (D) mm
Weight 5kg

 

Weight10.00 kg9.40 kg22.00 kg3.70 kg10.00 kg5.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 10.00 kg
Weight 9.40 kg
Weight 22.00 kg
Weight 3.70 kg
Weight 10.00 kg
Weight 5.00 kg