INTER-M PP-9214 Mixer/Pre-Amplifier

11%
All products by InterM

€362.91 incl. GR VAT

In stock

EAN: N/A
Installments calculation €
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: PP-9214 Category:
– VERSATILE AND COMPACT Flexible mix architecture in a space-saving two RU package. – TWELVE INPUTS AND TWO OUTPUTS Eight mono inputs and two stereo inputs, plus a stereo output. – INPUT AND OUTPUT METERING Peak meters on input channels, plus multi-segment LED metering to monitor your output signal. – THREE-BAND EQ Three-Band EQ control […]

 

Read more

– VERSATILE AND COMPACT

Flexible mix architecture in a space-saving two RU package.

– TWELVE INPUTS AND TWO OUTPUTS

Eight mono inputs and two stereo inputs, plus a stereo output.

– INPUT AND OUTPUT METERING

Peak meters on input channels, plus multi-segment LED metering to monitor your output signal.

– THREE-BAND EQ

Three-Band EQ control on output section

– ON-BOARD PHANTOM POWER

Built-in +18VDC phantom power for condenser microphones

– AC OR DC OPERATION

Runs on 100-120VAC, 220-240VAC, or 24VDC for true portability.

Frequency Response (±3dB)

20Hz-20kHz

T.H.D

Less than 0.5%

Input Sensitivity / Impedance

Mic Input 1-8

-60dB/600Ω Balanced

Line Input 2-8

-30dB/10kΩ Balanced

Line Input 9-12

+4dB, -10dB, -20dB/10kΩ Unbalanced

Output/Impedance

Ch 1-2 (Master)

+4dB/600Ω Balanced

Rec Out

-10dB/10kΩ Unbalanced

Line Input 9-12

0dB/10kΩ Unbalanced

Residual Noise

All Faders Min

90dB

All Faders Min,

Master Fader Max

70dB

Crosstalk

Input to Output

70dB

Adjacent

70dB

Power Sourse

100-V120VAC or 220v-240VAC;50 /60Hz,24v VDC Auto-Switching

(Supplied AC mains transformer depends on country requirements)

Power Consumption

9.8W

Weight

12.8Kg/34.3Ib

Dimensions

482(W) x 88(H) x 280(D)mm/19(W) x 3.5(H) x 11(D)in

※ Specifications and design subject to change without notice.

Weight 12.80 kg

Reviews

There are no reviews yet.

Be the first to review “INTER-M PP-9214 Mixer/Pre-Amplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

INTER-M PP-9214 Mixer/Pre-Amplifier removeTOA RM-200M Remote Microphone Console removeTOA AT-12UPR Volume Control 12W with priority removeINTER-M PD-659 POWER DISTRIBUTOR/CONTROL UNIT removeTOA AT-100UPR Attenuator with Relay 100 W removeINTER-M RM-500 Remote Mic Station remove
NameINTER-M PP-9214 Mixer/Pre-Amplifier removeTOA RM-200M Remote Microphone Console removeTOA AT-12UPR Volume Control 12W with priority removeINTER-M PD-659 POWER DISTRIBUTOR/CONTROL UNIT removeTOA AT-100UPR Attenuator with Relay 100 W removeINTER-M RM-500 Remote Mic Station remove
Image
SKUPP-9214RM-200MAT-12UPRPD-659AT-100UPRRM-500
Rating
Price €362.91 incl. GR VAT €492.47 incl. GR VAT €65.12 incl. GR VAT €314.00 incl. GR VAT €145.09 incl. GR VAT €287.00 incl. GR VAT
Stock

In stock

In stock

In stock

In stock

Available on backorder

In stock

AvailabilityIn stockIn stockIn stockIn stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

- VERSATILE AND COMPACT

Flexible mix architecture in a space-saving two RU package.

- TWELVE INPUTS AND TWO OUTPUTS

Eight mono inputs and two stereo inputs, plus a stereo output.

- INPUT AND OUTPUT METERING

Peak meters on input channels, plus multi-segment LED metering to monitor your output signal.

- THREE-BAND EQ

Three-Band EQ control on output section

- ON-BOARD PHANTOM POWER

Built-in +18VDC phantom power for condenser microphones

- AC OR DC OPERATION

Runs on 100-120VAC, 220-240VAC, or 24VDC for true portability.

Frequency Response (±3dB)

20Hz-20kHz

T.H.D

Less than 0.5%

Input Sensitivity / Impedance

Mic Input 1-8

-60dB/600Ω Balanced

Line Input 2-8

-30dB/10kΩ Balanced

Line Input 9-12

+4dB, -10dB, -20dB/10kΩ Unbalanced

Output/Impedance

Ch 1-2 (Master)

+4dB/600Ω Balanced

Rec Out

-10dB/10kΩ Unbalanced

Line Input 9-12

0dB/10kΩ Unbalanced

Residual Noise

All Faders Min

90dB

All Faders Min,

Master Fader Max

70dB

Crosstalk

Input to Output

70dB

Adjacent

70dB

Power Sourse

100-V120VAC or 220v-240VAC;50 /60Hz,24v VDC Auto-Switching

(Supplied AC mains transformer depends on country requirements)

Power Consumption

9.8W

Weight

12.8Kg/34.3Ib

Dimensions

482(W) x 88(H) x 280(D)mm/19(W) x 3.5(H) x 11(D)in

※ Specifications and design subject to change without notice.

RM-200M - Five/ten zone console for VM-2120/2240 amplfiers

The RM-200M Remote Microphone that allows announcements to be made to any speaker zone and emergency announcements to all zones on a system with the VM-2120/2240 system management amplifiers.

These announcements can be made live or pre-recorded announcements
can be activated. The remote microphone is connected by cable to the
RM-210 Remote Microphone Extension unit.

SPECIFICATIONS:

 

Power Requirement 24 V DC (12-30 V DC), (Supplied from VM-2120/VM-2240 Amplifier or local power suppy.)
Distortion Less than 1%
Frequency Response 100 - 10,000 Hz
Distortion Less than 1%
Signal-to-Noise Ratio More than 60 dB
Audio Output 0 dB*1, 600 O, balanced
Microphone Unidirectional electret condenser microphone, gooseneck type.
Speaker Zone Control Zones 1-5 (Zones 1-10 with 2 stacked amplifiers) Groups 1-2, and All-Zone Broadcast
Emergency Broadcast Activation of Emergency Broadcast (pre-recorded announcement*2 or live microphone announcement) by Emergency Switch
Voice Announcement Board Control Activation of 5 messages*2
Number of Connectable Units Up to 4
Communication System RS-485
Volume Control Microphone volume control
Connection Cable and Connector Category 5 STP cable, RJ45 connector
Communication Distance 800 m maximum in total
Finish ABS resin
Dimensions 190 (W) × 75.7 (H) × 21.5 (D) mm (Gooseneck microphone excluded)

*1 0 dB = 1 V
*2 An optional EV-200 Board must be mounted in the VM-2120 or VM-2240 Amplifier.

Volume Control 12W with priority.

- SYSTEM POWER CONTROL

You can control the power of your system by using this model.

- AC AND DC POWER SUPPLY

You can distribute AC and DC power through the AC outlet and DC terminals on the rear panel.

- USE OF EMERGENCY POWER SUPPLY

For emergency equipment power supply, an extra DC terminal is provided.

- REMOTE CONTROL

You can control the system power by remote control function even though the power switch on front is off.

- AC AND DC VOLT METER

This model uses digital volt meter displays of AC and DC.

- OPERATING MODE DISPLAY

You can easily check the operating mode by LEDs, AC or DC operating and emergency power.

PD-659

AC Outlet

Switched 2000W ⅹ3

Unswitched 700W ⅹ1

Remote Control

1

DC Power Output

DC 24V 5A

Operation Temperature

-10℃~+40℃

Power Source

100-120VAC or 220-240VAC; 50/60Hz

(Supplied ACmains transformer depends on country requirements)

Power Consumption

190W

Weight(SET)

6.2Kg/13.6Ib

Dimension(SET)

482(W) x 88(H) x 380(D)mm/19(W) x 3.5(H) x 15(D)in

※ Specifications and design subject to change without notice.

toa-at-100upr Build-in Attenuator with Relay
Toa - 100V installation

Build-in Attenuator with Relay 100 W / 100 V

 

*Convenient Priority Broadcasting

*Convenient Installation and Construction without ID Setting

*RS-422 Communication between RM-500 and Z-500

*21 Zone Paging Selection

*Output Signal Level Display

*Multi Chime Options

*Weight: 1.6kg/3.5Ib

*DImensions(W×H×D): 200×206×70mm/7.9×8.1×2.8in

 

Weight12.80 kg3.00 kg0.50 kg6.20 kg1.00 kg1.60 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 12.80 kg
Weight 3.00 kg
Weight 0.50 kg
Weight 6.20 kg
Weight 1.00 kg
Weight 1.60 kg

Related products