| Content |
| | - VERSATILE AND COMPACT Flexible mix architecture in a space-saving two RU package. - TWELVE INPUTS AND TWO OUTPUTS Eight mono inputs and two stereo inputs, plus a stereo output. - INPUT AND OUTPUT METERING Peak meters on input channels, plus multi-segment LED metering to monitor your output signal. - THREE-BAND EQ Three-Band EQ control on output section - ON-BOARD PHANTOM POWER Built-in +18VDC phantom power for condenser microphones - AC OR DC OPERATION Runs on 100-120VAC, 220-240VAC, or 24VDC for true portability. | | | | | | | | Frequency Response (±3dB) | 20Hz-20kHz | | T.H.D | Less than 0.5% | | Input Sensitivity / Impedance | Mic Input 1-8 | -60dB/600Ω Balanced | | Line Input 2-8 | -30dB/10kΩ Balanced | | Line Input 9-12 | +4dB, -10dB, -20dB/10kΩ Unbalanced | | Output/Impedance | Ch 1-2 (Master) | +4dB/600Ω Balanced | | Rec Out | -10dB/10kΩ Unbalanced | | Line Input 9-12 | 0dB/10kΩ Unbalanced | | Residual Noise | All Faders Min | 90dB | | All Faders Min, Master Fader Max | 70dB | | Crosstalk | Input to Output | 70dB | | Adjacent | 70dB | | | | | | Power Sourse | 100-V120VAC or 220v-240VAC;50 /60Hz,24v VDC Auto-Switching (Supplied AC mains transformer depends on country requirements) | | Power Consumption | 9.8W | | Weight | 12.8Kg/34.3Ib | | Dimensions | 482(W) x 88(H) x 280(D)mm/19(W) x 3.5(H) x 11(D)in | | ※ Specifications and design subject to change without notice. | | | |
|
![]() - CONVENIENT INSTALLATION AND CONSTRUCTION WITHOUT NEED OF ID SETTING. - ADOPTION OF RS-422 COMMUNICATION METHOD TO SUPPORT A LONG DISTANCE. - REMOTE CONTROL FOR ZONE VOLUME AND SELECTION OF BGM. - INDEPENDENT LOCAL MIC AND BGM BROADCASTING. ![]() | | | Audio Output | 0dB(Balanced) | | Audio Input | Paging & RM MIC & LM MIC | -50dB(Balanced) | | BGM(Main & Local) | -10dB(Balanced) | | Tone Control (100Hz & 10kHz) | Paging MIC | ± 10dB | | Audio Output | ± 12dB | | Frequency Response | BGM | ± 3dB | | MIC | ± 3dB | | S / N | BGM | Better than 75dB | | MIC | Batter than 65dB | | T.H.D. | BGM | Less than 0.05% | | MIC | Less than 0.05% | | Priority Control | Paging MIC > DRP > RM1> RM2 > RM3 > RM4 > LM-8000 > Main BGM | | Phantom Power | DC 24V | | Serial Interface | Communication Speed | 9600bps | | Communication Distance | Maximum 300m(UTP CAT%) | | Operation Temperature | -10℃ ~ +40℃ | | Power Source | 100-120VAC or 220-240VAC; 50/60Hz (Supplied AC mains transformer depends on country requirements) | | Weight(SET) | 130g / 0.28lb | | Dimensions(SET) | 70(W) x 114(H) x 52(D)mm 2.8(W) x 4.5(H) x 2.0(D)in | | ※ Specifications and design subject to change without notice. |
|
| | - CONVENIENT INSTALLATION AND CONSTRUCTION WITHOUT NEED OF ID SETTING. - SELECTION OF VARIOUS CHIME BROADCASTINGS FOR MIC BROADCASTING (PRE/POST). - CONVENIENT PRIORITY BROADCASTING. - ADOPTION OF OUTPUT SIGNAL LEVEL DISPLAY. - ADOPTION OF RS-422 COMMUNICATION METHOD TO SUPPORT A LONG DISTANCE. | | | | | | | | Audio Output | 0dB(Balanced) | | Audio Input | Paging & RM MIC & LM MIC | -50dB(Balanced) | | BGM(Main & Local) | -10dB(Balanced) | | Tone Control (100Hz & 10kHz) | Paging MIC | ± 10dB | | Audio Output | ± 12dB | | Frequency Response | BGM | ± 3dB | | MIC | ± 3dB | | S / N | BGM | Better than 75dB | | MIC | Batter than 65dB | | T.H.D. | BGM | Less than 0.05% | | MIC | Less than 0.05% | | Priority Control | Paging MIC > DRP > RM1> RM2 > RM3 > RM4 > LM-8000 > Main BGM | | Phantom Power | DC 24V | | Serial Interface | Communication Speed | 9600bps | | Communication Distance | Maximum 300m(UTP CAT%) | | Operation Temperature | -10℃ ~ +40℃ | | Power Source | 100-120VAC or 220-240VAC; 50/60Hz (Supplied AC mains transformer depends on country requirements) | | Weight(SET) | 1.5kg / 3.2lb | | Dimensions(SET) | 200(W) x 70(H) x 206(D)mm 7.9(W) x 2.8(H) x 8.1(D)in | | ※ Specifications and design subject to change without notice. | | | |
|
Five attenuation settings (OFF, 0/-6/-12/ -16dB), over an input range from 0.5W to 30W. |
| | - SYSTEM POWER CONTROL It controls the power of the rack system over all working together with the PD-659. - AC OUTLET TERMINAL To make the units using AC work, it has an AC outlet terminal for your convenience. AC switched group turn on and off repeatedly every 2 seconds. | | | | | | | PD- 658 | | AC Outlet | Switched 2000W ⅹ3 | | Operation Temperature | -10℃~+40℃ | | Power Source | 100-120VAC or 220-240VAC; 50/60Hz (Supplied AC mains transformer depends on country requirements) | | Power Consumption | 10W | | Weight(SET) | 4.6Kg/10.1 Ib | | Dimension(SET) | 482(W) x 88(H) x 380(D)mm/19(W) x 3.5(H) x 15(D)in | | | |
|
RM-200M - Five/ten zone console for VM-2120/2240 amplfiers
The RM-200M Remote Microphone that allows announcements to be made to any speaker zone and emergency announcements to all zones on a system with the VM-2120/2240 system management amplifiers.
These announcements can be made live or pre-recorded announcements
can be activated. The remote microphone is connected by cable to the
RM-210 Remote Microphone Extension unit.
SPECIFICATIONS:
| Power Requirement | 24 V DC (12-30 V DC), (Supplied from VM-2120/VM-2240 Amplifier or local power suppy.) | | Distortion | Less than 1% | | Frequency Response | 100 - 10,000 Hz | | Distortion | Less than 1% | | Signal-to-Noise Ratio | More than 60 dB | | Audio Output | 0 dB*1, 600 O, balanced | | Microphone | Unidirectional electret condenser microphone, gooseneck type. | | Speaker Zone Control | Zones 1-5 (Zones 1-10 with 2 stacked amplifiers) Groups 1-2, and All-Zone Broadcast | | Emergency Broadcast | Activation of Emergency Broadcast (pre-recorded announcement*2 or live microphone announcement) by Emergency Switch | | Voice Announcement Board Control | Activation of 5 messages*2 | | Number of Connectable Units | Up to 4 | | Communication System | RS-485 | | Volume Control | Microphone volume control | | Connection Cable and Connector Category | 5 STP cable, RJ45 connector | | Communication Distance | 800 m maximum in total | | Finish | ABS resin | | Dimensions | 190 (W) × 75.7 (H) × 21.5 (D) mm (Gooseneck microphone excluded) |
| *1 0 dB = 1 V
*2 An optional EV-200 Board must be mounted in the VM-2120 or VM-2240 Amplifier. |
|
Reviews
There are no reviews yet.