| Content |
Lexicon Alpha Desktop Recording Studio
Alpha
Record anywhere you can carry your laptop! Studio quality hardware and powerful software that turns your PC or Mac? into a 24-bit recording studio.
ALPHA STUDIO
The Alpha? Desktop Recording Studio is extremely compact, yet it gives you the features needed to get professional recording results anywhere! Designed with many of the same features found in professional studios, Alpha Studio is your complete recording solution: a USB powered I/O mixer with Cubase? LE, the popular recording production suite from Steinberg?, and our acclaimed Lexicon? Pantheon? VST? reverb plug-in. A dual-input, 2-bus, 2-output USB I/O mixer with extra high-impedance instrument input and separate headphone output gives you the freedom to not only record but also mix anywhere.
FOUR INPUTS: RECORD UP TO TWO TRACKS AT ONCE! - Stereo line inputs for keyboards, drum machines or analog output of a CD/MP3 player. RF-filtered TRS active-balanced inputs accept either balanced or unbalanced signals.
- Low-noise mic preamp with balanced XLR inputs.
- High-impedance front panel input for electric guitar or bass.
PROFESSIONAL MIXER FEATURES - Separate mic and line level input controls with individual peak indicators.
- Monitor mix control for balancing an audio source between live input and playback mix level while recording. Can be switched to stereo or mono.
- High-powered headphone amp offers ultra-clear fidelity while delivering ample power for any type of headphones.
- RF-filtered and TRS balanced Line outputs for speaker monitoring.
USB POWERED - Connect to your computer with the included USB cable. No need for a power supply?so you can record anywhere you can take your laptop.
Lexicon engineers are constantly working to improve the quality of our products. Specifications are, therefore subject to change without notice.
| Microphone Inputs | (1) Female XLR Pin 2 Hot | | Input Impedance | 600 ohms balanced | | Phantom Power | No | | GAIN | +50 dB | | EIN | -115dB A-weighted @50dB gain (150 Ohm source impedance) | | Maximum Input Level | +10dBu | | Frequency Response | +0, -0.5 dB 20 Hz - 20 kHz, ref. 1 kHz | | THD+N | | |
MINIMUM SYSTEM REQUIREMENTS - Mac
* OS X Leopard 10.5.8 or Snow Leopard 10.6.3
* 1 GB RAM (2 GB recommended)
* 6 GB free disk space
* Intel® processor (no PowerPC® support)
* One native USB port
MINIMUM SYSTEM REQUIREMENTS - PC
* Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit Native, or Windows 7 64-bit Native
* 1 GB RAM (2 GB recommended)
* 5 GB free disk space
* One native USB port
What's in the Box?
* Mbox Mini interface
* Pro Tools LE 8 software DVD-ROM installer (includes electronic versions of user guides, plus software plug-in bundle)
* Mbox user guide
* Registration information card
* USB cable
| GUITAR LINK UCG102 The Ultimate Guitar-to-USB Interface to Jam and Record with Killer Modeling Amps and Effects
- Plug in your favorite guitar and turn your PC or Mac computer into a guitar amp and recording system without the need for any other hardware
- Enjoy immediate access to Guitar Combos from Native Instruments—the leading authentic guitar amp and stomp box modeling software—now including VST, AU and RTAS plugin versions
- Create Music Now! Incredibly powerful energyXT2 Compact music production software and Audacity editing software—both with full portability on all PC, Mac or Linux computers
- Directly works with your PC or Mac computer—ultra-low latency ASIO driver for PC audio optimization included
- Stereo Headphone output lets you jam with your computer and can also be used for monitoring with active monitor speakers
- Guitar Combos with variable-speed file playback function for MP3, WAV, AIFF audio files—perfect for easy learning and practicing—tuner and metronome function
- Powered via USB—no additional power supply required
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
The UCG102 is a USB interface that, like a guitar amp, receives signal from your guitar via a 1/4" input jack. A built-in USB cable then sends signal directly to your computer, where the amazing included software package simulates guitar amps and stomp boxes, in addition to tracking your latest masterpiece. It has a 1/4" headphone jack and PHONES volume dial so you can monitor your performance as you record, a CLIP LED to tell you when your signal is too hot, and a HI/LO level selector.
Super Software
The UCG102 comes packaged with Native Instruments' "Guitar Combos" software that models guitar amps and stomp boxes. Take your pick of the "PLEXI COMBO“, "TWANG COMBO” or "AC BOX COMBO” for stunningly real amplifier tones. Sample them all, then activate the full version of the classic rockin' "AC BOX COMBO" rig. Native Instruments extends special offers to all registered Guitar Combos users, making it more affordable than ever to take advantage of their award-winning GUITAR RIG software packages. Visit http://co.native-instruments.com/index.php?id=4101&prid=247&redirected=1 for the latest special pricing on this incredible software.
You also get energyXT2.5 BEHRINGER Edition, a multi-track recording program.
This amazing DAW (digital audio workstation) makes it easy to manipulate your audio and MIDI files, turning song ideas into stunning CD or web-ready recordings. energyXT includes its own multi-FX processor, built-in synthesizers and a drum machine, both of which can be accessed directly via an external controller (such as our UMA25S or UMX25) or programmed in step-write mode. To learn more about energyXT Compact BEHRINGER Edition, visit http://www.behringer.com/EN/Support/energyXT.aspx. |
UA-20: Audio Capture USB Audio/MIDI Interface
Features
The UA-20 is the standard model to Edirol's rapidly expanding UA series of USB Audio Capture devices. The unit can accept input from Mic, Line and even guitar level signals. The audio is converted at 24-bit quality and is transferred to your computer via industry standard low latency WDM, ASIO, MME drivers for compatibility with all major sequencing platforms, the input signal may be also monitored directly in hardware. Outputs include analogue, digital and headphone. The built-in MIDI in and out utilize Edirol's Fast Processing Technology for super accurate MIDI timing with any sequencing software on Mac or PC platforms and can be used with both OMS or FreeMIDI drivers on the Apple Macintosh. The UA-20 requires no external power supply and is ideal for use by mobile laptop or Powerbook users. The unit ships with drivers for Windows XP, 2000, Me, 98, MacOS X, and Mac OS 9.x, 8.5 and may also be used with the native USB audio drivers that are included with both Mac & PC.
- Audio and MIDI in a compact unit.
- Fully equipped with I/O jacks.
- Great tool for creating music.
- Edirol's FPT Technology.
Record1 pair of stereoPlayback1 pair of stereoSignal ProcessingPC interface24 bitSampling RateDigital output44.1 kHzNominal Input Level-45 – -10 dBuInput ImpedanceLINE22 k ohmsGUITAR470 k ohmsMIC22 k ohmsNominal Output Level-10 dBuOutput Impedance1 k ohmsResidual Noise LevelMaster Out-105 dBu or less
(input terminated with 1 k ohm, Master Volume = max.,
Input Monitor = off, IHF-A, typ.)InterfaceUSB
Digital output (Optical Type , conforms to S/P DIF)ConnectorsInput Jack (1/4 inch phone type) x 2
Digital Out Connector (Optical type)
Headphones Jack (Stereo miniature phone type)
Master Out Jack (RCA phono type)
MIDI ConnectorsOthersPower SupplySupplied from the computerCurrent Draw170 mAAccessoriesOwnerʼs Manual
USB cable
CD-ROMSize and WeightWidth149 mm5-7/8 inchesDepth111 mm4-3/8 inchesHeight43 mm1-11/16 inchesWeight0.2 kg0 lbs. 8 oz.
|
The Yamaha GO44 is a mobile audio solution that features high quality line
inputs/outputs and worldclass MIDI and audio recording software enabling
professional quality recording to a computer in a very compact package that
can be carried and used virtually anyway.
The Yamaha GO44 boasts up to 24-bit/192kHz resolution on the analog inputs/
outputs - the best in its class - and 24-bit/96kHz on the digital I/O. This pro-level
quality makes the Yamaha GO44 perfect for any type of recording, and allows
you to capture the full details and nuances of the original source - from the
breathiness of a vocal to the delicate finger slides of an acoustic guitar performance.
The Yamaha GO44 features 4-in/4-out multi-channel audio, with two analog phone
jack terminals for both input and output, and special S/P DIF coaxial terminals for
two-channel digital in/out. This device is simple and easy to use, yet provides high-quality
recording capability - perfect not only for those who want to create music, but also
for those who want an audio playback system for their computer that delivers
outstanding sound quality.
The digital outputs on the Yamaha GO44 are compatible with the AC-3 and DTS
surround sound formats. Simply connect a surround compatible amplifier/speaker
setup, and enjoy the powerful sonic experience of surround sound.
Yamaha GO44 Features:
FireWire audio interface
Durable aluminum die cast body
Simple, small and light weight
2 x Balanced Line inputs / outputs
Headphones output on Front Panel
1 MIDI In /1 MIDI Out
S/P DIF In/Out up to 24 bit/96 kHz
24 Bit/192 kHz compatible
|
- Hybrid FireWire/USB2 connectivity — connect to your computer via either bus-powered FireWire or hi-speed USB2.
- CueMix FX™ — flexible 10 input/14 bus mixer with on-board DSP effects, including reverb with sends/returns, plus EQ and compression on every input and output.
- 10 inputs / 14 outputs — there's no channel sharing in the UltraLite-mk3 Hybrid; the mic inputs, S/PDIF I/O, headphone out and main outs are all handled as separate channels.
- Classic Reverb™ — provides five different room types, three frequency shelves with adjustable crossover points, shelf filtering and reverb lengths up to 60 seconds.
- Two forms of compression — a standard compressor with conventional threshold/ratio/attack/release/gain controls and the Leveler™, an accurate model of the legendary LA-2A optical compressor, which provides vintage, musical automatic gain control.
- Modeled EQ — provides 7-band parametric EQ modeled after British analog console EQs, featuring 4 filter styles (gain/Q profiles) to effectively cover a wide range of audio material. LP and HP filters are also supplied with slopes that range from 6 to 36 dB.
- CueMix FX cross-platform mixing software — attractive graphic mixing, graphic editing of parametric EQ and a convenient tabbed interface for quick access to all features in one window. Also provides full-screen real-time FFT display, spectrogram "waterfall" display, oscilloscope, X-Y plot and linear or polar phase analysis.
- Front-panel control — access any setting in your entire UltraLite-mk3 Hybrid mix directly from the front panel.
- “Reverb return" stream — allows users to record or mix UltraLite-mk3 Hybrid reverb output separately in their DAW. Effects can also be applied when the UltraLite-mk3 Hybrid is operating stand-alone (without a computer) as a complete stand-alone mixer.
- Stand-alone operation — program your mixes at the studio and then bring the UltraLite-mk3 Hybrid to your gig — no computer needed. Just plug in the included power adapter and you are ready to go. Need to tweak the mix? Do it on site using the back-lit LCD and front-panel controls.
- Multiple CueMix FX mixes — for example, create different monitor mixes for the main outs and headphones. Or add send/return loops for outboard gear — with no latency.
- Two combo jacks provide hi-Z 1/4” guitar input or low-Z XLR mic input with phantom power, pad and plenty of gain.
- Eight 24-bit 192kHz analog inputs and outputs on balanced/unbalanced 1/4" TRS jacks
- Precision Digital Trim™ — Digitally controlled analog trim on all analog inputs (mic/guitar inputs + quarter-inch TRS inputs) provides accurate adjustements in 1 dB increments. Fine-tune the balance of your analog inputs and then save/recall trim configurations.
- Direct Digital Synthesis™ (DDS) — a DSP-driven phase lock engine and internal clock source that produces imperceptibly low jitter characteristics (below the noise floor), even when the UltraLite-mk3 Hybrid is resolved to an external clock source via SMPTE time code.
- Time code support — directly resolves to (or generates) time code via any quarter-inch input or output, without the need for an extra synchronizer.
- Sample-accurate MIDI — connect a MIDI controller and/or sound module with no separate interface needed. MIDI I/O is sample-accurate with supporting software.
- Expandable — add additional interfaces for more I/O as your needs grow.
- Separate TRS main outs with front panel volume control.
- Stereo 24-bit 96kHz S/PDIF in/out.
- Includes drivers for Mac & PC, including ASIO, WDM, Wave, Core Audio, and Core MIDI. Supports all popular Mac and Windows audio software.
- 100% compatible with all host-based effects processing in today's popular audio programs.
- Includes AudioDesk full-featured sample-accurate workstation software for the Mac with recording, editing, mixing, real-time 32-bit effects processing & sample-accurate sync.
- Plug-and-play operation with your Mac or PC via FireWire or USB2.
- Front panel volume control for monitoring. Stereo, Quad, 6.1, 7.1 and user-defined surround monitoring setups available.
- Front panel headphone jack with volume control.
- Bus-powered FireWire operation. No need for external power when operating as a FireWire interface connected to a computer. A power supply is included for stand-alone operation.
- Chassis dimensions, excluding rack ears and front and back panel knobs and connectors: 9.5 x 7 x 1.75 inches (24.13 x 17.78 x 4.45 cm). Knobs and connectors extend up to 0.5 inch (1.27 cm) from front and back panels, adding 1 inch (2.54 cm) to depth. With rack ears attached, fits one half of a standard 19 inch (48.26 cm) rack at 1U high.
|
Reviews
There are no reviews yet.