MACKIE HR624mk2 Monitor – Active Reference Monitor

499.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Features Ruler-Flat Response 52Hz to 20kHz, + 1.5 dB Benefit: Sound true to actual recording Benefit: Any pair of speakers is a matched pair Active Technology 2 FR (Fast Recovery) Series Amplifiers; HF 40W; LF 100W Benefit: Precise dividing slope, correct phase, and low distortion Benefit: Minimal chance of speaker damage due to overdriving Servo […]

 

Read more

Features
Ruler-Flat Response 52Hz to 20kHz, + 1.5 dB

Benefit: Sound true to actual recording

Benefit: Any pair of speakers is a matched pair

Active Technology

2 FR (Fast Recovery) Series Amplifiers; HF 40W; LF 100W

Benefit: Precise dividing slope, correct phase, and low distortion

Benefit: Minimal chance of speaker damage due to overdriving

Servo Loop Woofer Technology

Electronic control and dampening

Benefit: Speaker output is as true to incoming signal as possible

Frequency Response Controls

80Hz low-cut switch; 3-position live/dead switch (-2bdB, Normal and +2dB)

Benefit: Excellent response in a variety of acoustic environments

Wide Sweet Spot

Custom-designed die-cast wave guide

Benefit: User hears the same thing across a wider range of motion

3-Position Acoustic Space Switch

Compensation in bass response for half-space (-2dB) and quarter-space (-4dB) placement

Benefit: As close-to-flat performance as possible regardless of placement in room

Applications
Professional Recording Studios

Home and Project Studios

Film (THX) and Post Production Studios

Home Theater Installations

 

Acoustic Performance
Free Field Frequency Response: 52Hz – 20Hz

Weight 12.25 kg

Reviews

There are no reviews yet.

Be the first to review “MACKIE HR624mk2 Monitor – Active Reference Monitor”

Your email address will not be published. Required fields are marked *

Quick Comparison

MACKIE HR624mk2 Monitor - Active Reference Monitor removeFOCAL CMS-50 ACTIVE STUDIO MONITOR 2-WAY HF 50W LF 80W removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR removeADAM A8X Active Studio Monitor 150W removeBEHRINGER Truth B-2031A 225W High-Resolution, Active 2-Way Reference Studio Monitor -PRICE PER PIECE- removeJBL LSR 6325P COMPACT STUDIO REFERENCE MONITOR remove
NameMACKIE HR624mk2 Monitor - Active Reference Monitor removeFOCAL CMS-50 ACTIVE STUDIO MONITOR 2-WAY HF 50W LF 80W removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR removeADAM A8X Active Studio Monitor 150W removeBEHRINGER Truth B-2031A 225W High-Resolution, Active 2-Way Reference Studio Monitor -PRICE PER PIECE- removeJBL LSR 6325P COMPACT STUDIO REFERENCE MONITOR remove
Image
SKU149.018CMS 50040050A8XE005760LSR 6325P
Rating
Price 499.00 incl. GR VAT 565.00 incl. GR VAT 155.00 incl. GR VAT 1,045.00 incl. GR VAT 221.00 incl. GR VAT 590.00 incl. GR VAT
Stock

Available on backorder

In stock

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderIn stockIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Features
Ruler-Flat Response 52Hz to 20kHz, + 1.5 dB

Benefit: Sound true to actual recording

Benefit: Any pair of speakers is a matched pair

Active Technology

2 FR (Fast Recovery) Series Amplifiers; HF 40W; LF 100W

Benefit: Precise dividing slope, correct phase, and low distortion

Benefit: Minimal chance of speaker damage due to overdriving

Servo Loop Woofer Technology

Electronic control and dampening

Benefit: Speaker output is as true to incoming signal as possible

Frequency Response Controls

80Hz low-cut switch; 3-position live/dead switch (-2bdB, Normal and +2dB)

Benefit: Excellent response in a variety of acoustic environments

Wide Sweet Spot

Custom-designed die-cast wave guide

Benefit: User hears the same thing across a wider range of motion

3-Position Acoustic Space Switch

Compensation in bass response for half-space (-2dB) and quarter-space (-4dB) placement

Benefit: As close-to-flat performance as possible regardless of placement in room

Applications
Professional Recording Studios

Home and Project Studios

Film (THX) and Post Production Studios

Home Theater Installations

 

Acoustic Performance
Free Field Frequency Response: 52Hz - 20Hz

The CMS 50 is the most compact monitoring loudspeaker of all the Focal Professional range. Its design permits listening from 50cm away, while still keeping the possibility of the monitors at a great distance from one another without damaging the soundstage. The 5” mid-woofer reaches down to 55Hz, while offering a controlled bass and a totally linear midrange. The midrange register of the CMS 50 has unequalled neutrality in its price range. The Al-Mg inverted dome tweeter offers outstanding dynamics and a degree of definition in the treble that allow precise measurement of reverb and other effects which are normally very difficult to assess.

 

Specifications
Frequency response (+/-3dB) : 55Hz - 28kHz
Maximum SPL : 107dB SPL (peak @ 1m)

Input :

Balanced 20 kOhms / Unbalanced 47 kOhms
Connector XLR / RCA

HF amplifier stage : 50W RMS, class AB
LF amplifier stage : 80W RMS, class AB

Electric supply :

Mains voltage: 220 - 230V (1.6A fuse rating)
120V (3.5A fuse rating)
100V (4A fuse rating)
IEC inlet and detachable power cord

Adjustment :

- Adjustable sensitivity, +4dBu / 0 / -10dBV
- Adjustable volume, -66dB / 0dB
- Adjustable high-pass filter, idle / 45 / 60 / 90Hz (12dB/oct.)
- Adjustable LF Shelving, 0 / -4 / -2 / +2dB
- Adjustable HF Shelving, 0 / -4 / -2 / +2dB
- Parametric filter (160Hz), adjustable, 0 / -2 / -4 / -6dB
- Power ON/OFF switch, mains voltage selector
- STANDBY/ON switch

Indicators :

Power ON / OFF LED
Standby / ON LED
Audio Clip LED

Woofer : 5" Focal drive unit, Polyglass cone
Tweeter : Aluminum/Magnesium inverted dome Focal tweeter
Shielding : Integral by cancellation magnet
Construction : Reinforced and damped Aluminum cabinet

Finish :

Black powder cabinet

Dimensions with spikes : 289.5 x 190 x 201mm (11.4" x 7.5" x 7.9“)
Dimensions with table stand : 299.5 x 190 x 201mm (11.8" x 7.5" x 7.9“)
Net weight : 7.7kg - (17lb)

 


Features

    Professional 2-way active DJ monitors
    Output: 2x 30 W RMS
    Frequency response: 35 Hz - 20 kHz
    S/N Ratio: > 75 dB
    Impedance: 8 ohm
    Magnetically shielded bass drivers
    Speakers: 13.34 cm (5.25“) bass, 2.54 cm (1“) tweeter



    Technical Data

    Dimensions: 232 x 320 x 180 mm
    Weight: 5.0 kg (per piece)

PRICE PER UNIT

The most powerful AX monitor

With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Review: A8X: a "powerful link" between near- and midfield monitors!

"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)

Mid-Woofer
Number1
Basket Ø8.5" (220 mm)
Voice coil Ø1.5" (38 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music150 W / 225 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥112 dB
Max. peak≥120 dB
Crossover frequencies2300 Hz
Input impedance30 KOhm
Weight28.7 lb (13 kg)
Magnetically shieldedNo
Height x Width x Depth15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual



Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency diagrams
Built-in 150- and 75-Watt power amps with enormous power reserve
Ultra high-resolution ferrofluid-cooled tweeter
Long-throw 8 ¾" woofer with special polypropylene diaphragm and deformation-resistant aluminum die-cast chassis
Controlled dispersion characteristics and extremely large "sweet spot” owing to the unique BEHRINGER wave guide technology
Active crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions and subwoofer operation
Separately controlled limiter for low and high frequency overload protection
Automatic standby mode (defeatable)
Magnetic shielding allows placement near computer monitors
Delivered as "matched pairs” with individual frequency diagrams
Low-vibration and environment-friendly E1 MDF cabinet
Servo-balanced inputs with XLR and ¼” TRS connectors
Conceived and designed by BEHRINGER Germany

The compact LSR6325P-1 provides exceptional performance for use in applications
where accuracy is a must, but space is limited. With a 5.25 in. high-excursion woofer,
a damped titanium composite tweeter, and 150 Watts of amplification, it outperforms
many larger systems. When used with the LSR6312SP Subwoofer, the LSR6325P-1
is the heart of an exceptionally accurate yet space efficient full-range system.

Features:
High-performance bi-amplified design with patented JBL transducer technology.
Front panel volume and power controls.
Integrated mounting points for horizontal and vertical suspension.
Titanium composite high frequency device with elliptical oblate spheroidal waveguide.
Shielded for use next to video monitors.
Built in high-pass filtering for use with optional subwoofer.
User selectable workstation boundary compensation.
Powered monitors with 5.25" woofers and 1" titanium composite dome tweeters
100 watts power for low frequencies, 50 watts for highs
Cast aluminum enclosure for structural rigidity and light weight
Magnetically shielded for interference-free use near CRTs and other electronic gear
Linear Spatial Reference technology ensures even frequency response at the mix position
 

Weight12.25 kg7.70 kg3.50 kg13.00 kg7.50 kg8.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 12.25 kg
Weight 7.70 kg
Weight 3.50 kg
Weight 13.00 kg
Weight 7.50 kg
Weight 8.00 kg