MACKIE Mix12FX Console 12 channels with integrated 12 FX, 4 mic inputs

148.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: 149.212 Category:
Console 12 channels with integrated 12 FX, 4 mic inputs with Low cut (75Hz), 4 stereo 1/4 ‘line inputs, 60mm master fader, EQ three regions, pan pot 48V phantom power, RCA tape in / out, balanced master out (TRS) and headphone / control room. Dimensions (HxWxD) 53x297x244mm – 1,7kg. Characteristics: 12-channel compact effects mixer with […]

 

Read more

Console 12 channels with integrated 12 FX, 4 mic inputs with Low cut (75Hz), 4 stereo 1/4 ‘line inputs, 60mm master fader, EQ three regions, pan pot 48V phantom power, RCA tape in / out, balanced master out (TRS) and headphone / control room. Dimensions (HxWxD) 53x297x244mm – 1,7kg.

Characteristics:

12-channel compact effects mixer with provnoise performance
4 mic / line inputs with studio-level audio quality
3-band EQ with clean, precise tone shaping
Low cut filter (75Hz)
Pan, level and overload indication
Phantom power for studio condenser mics
4 stereo 1/4 ‘line inputs
+ 4 / -10dB operation
Balance, level and overload indication
12 great-sounding integrated effects incl reverbs, choruses and delays
Dedicated stereo RCA inputs / outputs
60mm fader for Main L / R outputs
Headphone and stereo control room outputs with separate volume control
Rugged, reliable design built to last
Extremely compact and portable

Noise

(20 Hz – 20 kHz bandwidth, 150 ohm source impedance, EIN)

All outputs, master levels and channel levels off –100 dBu

All outputs, master levels unity, all channel levels off –90 dBu

All outputs, master levels unity, 1 channel level unity –85 dBu

THD+N (20 Hz – 30 kHz bandwidth)

Mic input to main output

Weight 2.00 kg

Reviews

There are no reviews yet.

Be the first to review “MACKIE Mix12FX Console 12 channels with integrated 12 FX, 4 mic inputs”

Your email address will not be published. Required fields are marked *

Quick Comparison

MACKIE Mix12FX Console 12 channels with integrated 12 FX, 4 mic inputs removeSOUNDCRAFT SPIRIT FOLIO FX16 II Stereo Mixer with Lexicon Effects removeDYNACORD CMS 2200-3 Sound Desk 22 Channels removeSOUNDCRAFT GB4 LIVE 32MONO + 2STEREO MIXING CONSOLE removeSOUNDCRAFT RZ-2701 200M OPTICAL FIBRE CABLE removeSOUNDCRAFT EPM 6 Mixing Desk 6 mono(mic-line-insert)/ 2 stereo remove
NameMACKIE Mix12FX Console 12 channels with integrated 12 FX, 4 mic inputs removeSOUNDCRAFT SPIRIT FOLIO FX16 II Stereo Mixer with Lexicon Effects removeDYNACORD CMS 2200-3 Sound Desk 22 Channels removeSOUNDCRAFT GB4 LIVE 32MONO + 2STEREO MIXING CONSOLE removeSOUNDCRAFT RZ-2701 200M OPTICAL FIBRE CABLE removeSOUNDCRAFT EPM 6 Mixing Desk 6 mono(mic-line-insert)/ 2 stereo remove
Image
SKU149.212SPIRIT FOLIO FX16 IIE003071GB4 32CHRZ2701SPIRIT EPM6
Rating
Price 148.00 incl. GR VAT 832.70 incl. GR VAT 2,760.00 incl. GR VAT 2,909.00 incl. GR VAT 4,200.00 incl. GR VAT 305.00 incl. GR VAT
Stock

Available on backorder

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentConsole 12 channels with integrated 12 FX, 4 mic inputs with Low cut (75Hz), 4 stereo 1/4 'line inputs, 60mm master fader, EQ three regions, pan pot 48V phantom power, RCA tape in / out, balanced master out (TRS) and headphone / control room. Dimensions (HxWxD) 53x297x244mm - 1,7kg. Characteristics: 12-channel compact effects mixer with provnoise performance 4 mic / line inputs with studio-level audio quality 3-band EQ with clean, precise tone shaping Low cut filter (75Hz) Pan, level and overload indication Phantom power for studio condenser mics 4 stereo 1/4 'line inputs + 4 / -10dB operation Balance, level and overload indication 12 great-sounding integrated effects incl reverbs, choruses and delays Dedicated stereo RCA inputs / outputs 60mm fader for Main L / R outputs Headphone and stereo control room outputs with separate volume control Rugged, reliable design built to last Extremely compact and portable Noise
(20 Hz – 20 kHz bandwidth, 150 ohm source impedance, EIN) All outputs, master levels and channel levels off –100 dBu All outputs, master levels unity, all channel levels off –90 dBu All outputs, master levels unity, 1 channel level unity –85 dBu
THD+N (20 Hz – 30 kHz bandwidth) Mic input to main output

Soundcraft FX16ii - rebirth of a classic

The Soundcraft FX16ii mixer uses the same AudioDNA processor featured in many of the Digitech and Lexicon outboard equipment including the highly respected Lexicon MX500 processor. With over 35 years experience, the Lexicon name is synonymous with the best reverb and processing in the business, ensuring the finest quality effects not usually found in a console at this price level.

The Soundcraft FX16ii offers a combination of powerful live and recording features; each channel has a Direct Output which is individually switch-able pre or post fader to enable use with 16-track recording systems. The Lexicon effects work just as well in the live as well as the recording environment with a tap tempo function, 3 parameter controls, user effects settings store ability, effects clip LED and 32 powerful and editable effects to choose from.

The use of the latest PCB surface mount technology means that the Soundcraft FX16ii fits all of these features into a rugged, compact frame which can be optionally rack-mounted into a 10U space via Soundcraft FX16ii's rotating connector pod which allows cables to be connected conveniently behind the rack and save rack space.

Soundcraft FX16ii main features include:

  • 26 inputs
  • 16 mono microphone channels
  • 4 stereo returns
  • 4-bus architecture, with sub-group routable to mix
  • Built-in 24 bit Lexicon digital effects processor
  • 32 FX settings
  • Tap Tempo
  • 3 FX parameter adjust rotaries
  • User FX settings store function
  • Direct outputs for multi-track recording individually switch-able for pre-post-fade operation
  • Inserts on all mono channels
  • Inserts on stereo mix output
  • Classic Soundcraft 3-band EQ with swept mid-band
  • Stereo 18dB/octave 100Hz high-pass filter
  • Dual global +48V phantom power split channels 1-8 and 9-16
  • Channel Mute control
  • 10-segment tri-coloured metering
  • Two sub-group outputs
  • Separate mono sum output
  • Integral universal power supply

MIC/LINE Input Channels
The XLR microphone input is equipped with an extremely high quality, ultra-low noise, discrete preamp.
The +48V phantom power for condenser microphones can be switched in groups of six.
The Line Input and Channel Insert are implemented as jack sockets.
The Gain can be controlled in the range 0-60 dB.
The switchable Lo Cut filter (80Hz, 18dB/oct.) serves to eliminate low-frequency noise. A very typical DYNACORD feature is the asymmetrical Voicing Filter by means of which, if desired, the voice can be powerfully emphasized in the mix.
Optimized for ease-of-use, the 3-band semi-parametric equalizer makes it possible even for unpracticed users to perform the requisite corrections swiftly and intuitively.
With their extended buss structures, the CMS3 mixers offer very flexible configuration options. In all, 6 AUX busses are available in each case:
2 (FX) are assiged to the two effects devices;
2 (AUX) can be configured either as monitor or effects sends by means of a switch in the Main section;
2 (MON) are designed as monitor sends, each being equipped with a sweepable anti-feedback filter in the Master section.
MUTE and PFL switches, each with its own LED, make it possible to mute each input channel individually and/or listen to its pre-fader signal.
Each channel offers a Signal Present and Peak LED for level control.
The channel faders are dust-protected and offer not only excellent crosstalk attenuation but also a practice-optimized control characteristic.
All potentiometers and faders are high-quality components from ALPS.
Stereo MIC/LINE Input Channels
The stereo input channels are equipped in much the same way, but optimized, naturally, to carry stereo signals.
Two of the four stereo inputs of each model are additionally equipped with cinch (RCA) sockets switched in parallel for CD or MP3 players.
The two other stereo inputs receive in addition the four channels of the digital audio interface USB 1-2 and USB 3-4
Separate Gain controls are provided for the Stereo Line and Mic inputs to permit them to be used in parallel if desired.
Three-band tone controls are provided, and a Balance control replaces the PAN control found in the mono channel strips.
MASTER
In the Master Section, too, the CMS3 mixers are lavishly equipped.
The 11-band stereo equalizer can be routed to the Master channels or else to either or both of the Monitor Sends according to choice.
The FX1+2 Returns as well as the AUX1+2 and MON1+2 Sends are on faders just like the Master L/R signal, which makes for comfortable and intuitive operation.
The Master B signal is available pre or post MASTER L/R fader and can be mono-summed if desired. The Master signal is also available on the REC Send cinch (RCA) output with level control.
The level meters of the CMS3 comprise two LED chains of 12 LEDs each. The display range covers 40 dB; what is shown is the level in dBu at the master outputs. When the PFL switch is activated, the left-hand LED chain shows the internal level of the master buss in dBu.
The Standby switch mutes all channels e.g. during pauses, with only the 2TRACK-to-Master input remaining active for the playback of interval music.
A 4-pin XLR socket is provided for the connection of a standard 12V/5W gooseneck lamp.
DIGITAL USB 2.0 AUDIO INTERFACE  
The USB 2.0 port serves as a digital audio interface between the CMS3 and a PC or Mac. Four channels can be transmitted in either direction simultaneously. This interface can therefore be used either for the input of audio signals (e.g. for playback or interval music) or else for live- or studio-recording applications. It is configured by selecting the relevant setting in the menu.
For the use of the CMS3 with a PC or Mac, a free Cubase LE license as well as the requisite USB drivers are included free-of-charge on the supplied DVD.
PC MIDI Interface
The CMS3 also offers a fully-featured PC MIDI interface.
The MIDI input also supports the remote switching of both internal effects units using a master keyboard or MIDI footswitch.
Professional Effects, OLED Display and Processing Menus
The CMS3 has two integrated stereo multi-effects processors that work independently of one another, each offering 100 effects algorithms optimized for live performance, the most important parameters of which are editable.
Linear 24-bit AD/DA converters and 48-bit double-precision processing guarantee the finest studio quality based on state-of-the-art technology.
The 100 program locations of each device are packed with high-quality reverbs, halls and plates that deliver professional results in live performance on stage as well as in both studio and home recording environments.
Other presets include Echo/Reverb and Chorus/Echo combinations, a variety of delay, flanger, chorus and doubling algorithms, as well as special reverb and delay programs. When a delay effect is active, the delay time can be synchronized to the beat of the music using the TAP key.
Edited effects programs can be stored in the 20 User memories offered by each device, assigned names, and later selected and used in the same way as the presets.
The large, high-contrast OLED display is easily read from a wide range of viewing angles—even in very bright surroundings. The operation of the effects units and processing menus is intuitive and made easier still through the use of soft keys and a rotary encoder.
Processing Menus
For the basic settings, configuration, use of the effects and special functions, a wide variety of editing options can be selected from the clearly arranged menus.
Innovative Solution for Protection and Transportation
Optionally available for the CMS 1000 and 1600 is a very robust plastic lid with an integrated handle—a highly innovative solution that offers optimal protection for the device as well as greater carrying comfort.
For the CMS 2200, due to its greater size, a flight-case solution is recommended (available as a further option is a dust cover: the DC-PM2200-COVER).
Accessories
For rack installation of the CMS 1000 (or table installation of the models 1600 and 2200), the mounting kit RMK 1000-3 is available.
Other accessories include the gooseneck light DC-LITLITE-4P and the DC-FS11 ON/OFF footswitch for the effects units.

Κονσόλα ήχου με νέας γενιάς προενισχυτές GB30, σχεδιασμένη για διπλή χρήση σαν front of house ή stage monitor. Διαθέτει 32 mono εισόδους (mic) με EQ 4 περιοχών (παραμετρικό για mid&low mid), 2 stereo εισόδους με EQ 4 περιοχών, 4 group, 8 AUX, με δυνατότητα εναλλαγής (SWAP) μεταξύ AUX 1-4 & group. Διαθέτει επίσης 4 mute groups, matrix 7x5, direct εξόδους σε κάθε mono είσοδο, ενδεικτικά στάθμης με 12-LED και REC out με limiter. Εσωτερικό τροφοδοτικό με link out για δεύτερο εξωτερικό. Βάρος 32kg. Κατάλληλη για μόνιμες εγκαταστάσεις, θέατρα, live p.a.

Low-cost high-performance mixers Key Features
  • 6 Mono & 2 Stereo Input Channels
  • 6x GB30 Microphone Preamplifiers
  • Recording and Live Sound Audio Console
  • Compact Mobile Enclosure
The Soundcraft EPM Series provides a straight-forward, yet professional alternative to complex audio mixers. Constructed in a 6-, 8- or 12-channel chassis, the EPM mixers are well-suited for recording and sound reinforcement applications. The EPM 6 features 6 mono and 2 stereo input channels providing the flexibility needed to accommodate the recording studio, venue or touring musician. All mono inputs feature 1/4" phone line and balanced XLR microphone inputs. The famed GB30 microphone preamps provide the quiet, detailed signal synonymous with Soundcraft\'s large FOH consoles. The stereo inputs provide L/R 1/4" phone connections and are ideal for connecting stereo devices such as keyboards, returning effects, etc. The EQ section features a sweepable mid-range on all mono channels and provides smooth frequency contouring. Inserts on all mono channels and stereo output enable signal routing to external signal processors. The compact profile, rich sound quality and flexibility of the EPM Series provides everything necessary for use in project recording, video editing, night clubs, bars, meeting halls, houses-of-worship, and more. 6 Mono and 2 Stereo Channels The EPM 6 features 6 mono microphone and line input channels, 2 stereo inputs feature L/R 1/4" phone connections Comprehensive Controls The comprehensive layout is designed to attract users who require a straight-forward mixing environment GB30 Microphone Preamplifiers All 12 mono inputs feature Soundcraft\'s GB30 microphone preamps for quiet, clean large-format FOH console quality Compact and Professional The EPM Series consoles pack a professional feature set in a compact, mobile enclosure
Total # Of Inputs 6x Mono 2x Stereo
Mic/Line Inputs 6x Line Mono: 1/4" TRS Phone 2x Line Stereo: L/R 1/4" TRS Phone 6x Microphone: 3-pin XLR
Stereo Line Inputs 2x Stereo: L/R 1/4" TRS Phone
In-Line Inputs/Returns No
AUX Sends 2x Aux Sends
AUX Returns No dedicated returns
Inserts 1/4" TRS Phone - Mono Inputs, Main Stereo Output
BUS (Group) Outputs Stereo Output Only
2 Trk Master I/O Mix L/R: Stereo Paired L/R RCA Phono
ALT I/O No
Monitor Outputs Monitor: L/R Stereo Paired 1/4" TRS Phone
EQ Section Mono Inputs +/- 15 dB Lo: 80 Hz Mid: 150 Hz - 3.5 kHz (swept) Hi: 12 kHz Q: 1.5 Stereo Inputs +/-15 dB Lo: 80 Hz Mid: 720 Hz Hi: 12 kHz
Solo/Mute All Input Channels
Channel Level Control 100 mm Faders
Trim/Gain Control Rotary Potentiometers
Phantom Power +48 V Phantom
Metering 10-Segment L/R Peak LEDs +48 V Phantom Power LED PFL Active LED Power Indicator LED
Frequency Response 20 Hz to 20 kHz +/-1.5 dB
Dynamic Range Not specified by manufacturer
Signal-to-Noise Ratio Noise (22 Hz - 22 kHz measurement bandwidth) Mic EIN @ max gain, 150 ohms source impedance -127 dBu Mix @ max, faders to down
Total Harmonic Distortion (THD) Mic sensitivity 30 dB, +14 dBu @ mix output:
Weight2.00 kg5.00 kg12.00 kg32.00 kg1.00 kg5.20 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 2.00 kg
Weight 5.00 kg
Weight 12.00 kg
Weight 32.00 kg
Weight 1.00 kg
Weight 5.20 kg