Mackie ProFX8v2 Mixing desk with 8ch and effects

• 4 low-noise Mackie Vita mic preamps add life to any input
• ReadyFX effects engine with 16 effects including reverbs, delays, and choruses
• 7-band graphic EQ for tuning mains or monitors
• Aux output for monitor mixes, venue 70-volt systems, and more
• 3-band EQ and 100Hz low-cut filter on all channels
• hi-Z input lets you directly connect guitar, bass, and other instruments
• 48-volt phantom power on all mic channels
• Headphone output with separate level control for easy monitoring
• Roadworthy design with steel chassis and ABS side protection
• 3 stereo channels plus a stereo return for external effects or stereo playback devices
• Balanced XLR and balanced/unbalanced 1/4-inch main outputs
• FX mute with remote control via footswitch
• Break switch mutes all channels for music playback between sets
• USB for playback music and recording via Mac or PC

16 mono inputs to a stereo mix output. Rackmount version of the GB2.

The highly-acclaimed and successful Soundcraft GB Series has gained another new member, the Soundcraft GB2R. This 19 inch rack-mountable mixer is designed specifically for smaller installations in churches and performance venues, or for small portable PA systems. It will also find friends in Broadcast where its high quality and feature set will be very appealing.

Features
19 inch Rackmountable console

16 channel version, with 16 mono inputs, Stereo Mix and Mono Sum Outputs and 6 Aux Outputs. - Total Inputs to Mix: 22

12.2 channel version, with 12 mono inputs and 2 stereo inputs, 1 Stereo Sub Group Output, Mix and Mono Sum Outputs, and 6 Aux Outputs - Total Inputs to Mix: 26 (when Mics used on stereo input)

Rotatable connector pod for top or rear cable entry

8 (GB2R-16) or 10 (GB2R-12.2) busses

2 full feature stereo inputs (GB2R-12.2 version)

GB30 Mic preamp and precision EQ on inputs

Switchable +48V phantom power on every mic input

100Hz Hi-pass filter

Direct outputs on every channel

100mm faders

Stereo Mix Output and separate Mono Sum output

Record output

Internal Universal switched mode PSU

Available in two variants, the GB2R offers either 16 mono inputs to a stereo mix output, or a 12.2 version with 12 mono inputs, two full-feature stereo inputs and 2 group busses, each model having 6 auxiliary sends.

As always with Soundcraft consoles, emphasis has been placed on operational simplicity, clear and intuitive layout and the highest possible audio performance. The Soundcraft GB2R inherits both the GB30 Mic preamplifier and GB30 Equaliser designs from the GB4 and GB8.

For ease of installation, the connector section is contained in a rotatable pod, allowing cable access from the top of the mixer if sat on a table-top, or from the rear when mounted in a 19 inch rack.

On the stereo inputs on the 12.2 model, connectors are provided for both Mic and Line inputs. With Mic signals routed to the local channel, the Line inputs are available as stereo returns to the main mix bus. Two stereo returns and a 2-track (for example CD replay) input are provided, which means that the GB2R-12.2 model can offer up to 26 inputs to mix in a mixer just 19" (485mm) wide.

Every input has a pre/post switchable direct output for recording or effects sends, while an internal universal voltage PSU avoids external power supply connections.

The whole GB Series carries the high quality hallmark with which Soundcraft is synonymous, with engineering and design as you'd expect from this high-end manufacturer. Careful attention has been given to the mechanical construction, to ensure reliability and ruggedness under strenuous conditions, with all input modules being constructed with individual vertically-mounted pcb's, fitted to the steel chassis front panel with individually-nutted potentiometers.

The LX7 combines the essential Soundcraft live mixer qualities
with basic recording-oriented features, in a compact frame that's
light enough for one person to carry yet easy to configure and use.
This makes it especially suitable for multi-purpose use in venues
such as small halls and community centres, while its direct channel
outputs make the LX7 an ideal choice for bands who need a live desk
that can double up in the studio.

Housed in a choice of 16, 24 or 32 channel frame, LX7 provides 24,
32 or 40 inputs - with no less than 7 separate bus outputs including
mix, 4 groups and a dedicated mono bus for centre speaker clusters,
side or rear fills. The output count rises to 29 with the inclusion of direct
outs on the first 16 mono inputs and six auxiliary busses.

LX7's balanced mic inputs all use patented Ultramic preamps,
providing 60dB of gain range and 22dBu of headroom. Each input
also includes 4 band EQ with two swept mid frequency controls.
In addition, EQ In/Out switch and steep 18dB/Octave High Pass Filter,
allow effective audio control in difficult venues whilst the six auxiliary sends
are pre-post switchable in pairs from each channel, providing a maximum of
4 pre-fader and six post-fader. This makes LX7 equally applicable
for foldback - heavy performance or in situations where more effects are required.

LX7's groups section houses two further stereo inputs - with EQ, auxiliaries
for keyboards or stereo recording devices - as well as two FX returns. All four
groups are routable to mix and include 12 segment bargraph metering for
accurate monitoring and inserts. Six auxiliary masters on rotary controls also
included AFL soloing.

In the master section there is talkback provision to all pre-fade auxiliaries and
the mix. Global phantom power and a two track return for pre-show music are
also present. A "two-track" to mix switch allows the engineer to play CD's over
the main PA whilst back-stage set-up is going on, with one press of a button.
The mix is also routable to the separate mono bus if mono PAs are required.

LX7 is built in a rugged wedge-shaped steel chassis with an internal power supply,
professional all-metal jackfield and connectors on the rear of the console. All inputs and outputs are balanced.

Applications:

    * Gigging Bands
    * Small installations
    * Small venues
    * Theatres
    * Houses of Worship
    * Live and studio recording

 
    *  100mm faders
    * +48V phantom power
    * 16, 24 or 32 channel frame sizes
    * Up to 40 inputs (including stereo inputs and returns)
    * 18dB/octave high-pass filter
    * 6 aux sends, 4 of them pre/post switchable
    * Group and mix inserts
    * 12-segment LED metering
    * Integral PSU

• 12+2 channel frame sizes
• Built-in 24 bit Lexicon digital effects processor
• 32 FX settings
• Tap Tempo and FX setting store function
• 1 FX send on each channel
• 1 configurable auxiliary bus
• XLR-type and Ό� metal jack connector sockets
• RCA phono stereo playback inputs and record outputs
• 3-band EQ with a swept mid on mono inputs
• 3-band EQ on stereo inputs
• TRS insert sockets and inserts on all mono inputs
• Ten-segment LED output metering
• Intuitive and comprehensive solo system
• Headphone output
• Easily rack mountable

The Soundcraft GB-2 (2-bus) 32 Channel Console is designed for installed sound and A/V applications that donʼt require all the sophisticated functionality of the GB4 and GB8.

However the Soundcraft GB-2 32 Channel Console is a genuine GB Series console in every respect, with sound quality assured by GB30 Mic Pre and Equaliser designs, and reliability by the same rugged build quality that has made the GB4 and GB8 so dependable in demanding professional applications.

Along with six Aux busses and an integral 6 x 2 matrix, four subgroups are provided as two stereo pairs, with a unique facility for adjusting the width of the stereo signal across the stereo mix. The channel pan settings are retained on the group outputs, while the degree of stereo separation to the mix bus is independently adjustable from full stereo through to mono.

The GB2 also features two stereo input channels, with separate mic and line inputs. In normal use, the mic inputs are routed to the local channel and the line inputs act as a stereo return to the mix bus. Selecting the line input to the local channel overrides the mic inputs.

The Soundcraft GB-2 (2-bus) 32 Channel Console Main Features Include:

• 32 channel frame size
• 12 busses
• 2 full feature stereo channels
• 2 stereo returns (on stereo channels)
• 6 Aux sends
• 4 sub groups (paired)
• 6x2 output matrix
• GB30 mic preamp and precision equalisation circuitry
• Direct outputs on every channel
• Talkback facility
• 100mm faders
• Switchable 48V phantom powering on every channel
• 100Hz high pass filter
• 12-segment LED metering
• Record output
• Width: 1247mm (49.09“)
• Weight: 30kg (66.1lbs)