Marantz Professional MPM2000 Large Diaphragm Condenser Microphone

139.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: 134.800 Category:
The MPM-2000 from Marantz Professional is a cardioid condenser microphone with a gold-plated, 34mm-diameter diaphragm capsule that captures audio in high-quality critical recording applications. It can be used by engineers, musicians, and producers in environments such as recording studios, for live stage, in project studios, and more. The microphone is great for recording closely spaced […]

 

Read more

The MPM-2000 from Marantz Professional is a cardioid condenser microphone with a gold-plated, 34mm-diameter diaphragm capsule that captures audio in high-quality critical recording applications. It can be used by engineers, musicians, and producers in environments such as recording studios, for live stage, in project studios, and more.

The microphone is great for recording closely spaced subjects by maintaining a good degree of isolation, and is also an excellent choice for recording live performances when sound comes from many directions. The tightly defined pattern preserves excellent isolation and prevents unwanted feedback. A shockmount, pop filter, and aluminum carry case are also included.

 

 Sound Field

Mono
Transducer Condenser
Diaphragm 1.34″ (34 mm)
Polar Pattern Cardioid
Frequency Range 20 Hz to 20 kHz
Signal to Noise Ratio 80 dB 
Maximum SPL 137 dB SPL
Impedance 55 ohms +/- 30% @ 1 kHz
Load Impedance 1000 ohms
Sensitivity -32 dB @ 1 kHz, re: 1 V/Pa
Power Requirements 48 V
Output Connectors 3-pin XLR
Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “Marantz Professional MPM2000 Large Diaphragm Condenser Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

Marantz Professional MPM2000 Large Diaphragm Condenser Microphone removeSHURE SM-81LC - Cardioid Condenser Microphone removeShure VP-88 - M-S Stereo Microphone with Internal Matrix, Batter removeSENNHEISER ME-66 Shotgun Electret Microphone - Capsule removeAKG C 568B HYPERCARDIOID CONDENSER SHORT SHOTGUN MICROPHONE removeSENNHEISER ME-62 OMNI-DIRECTIONAL MIC CAPSULE for K6 and K6P POW remove
NameMarantz Professional MPM2000 Large Diaphragm Condenser Microphone removeSHURE SM-81LC - Cardioid Condenser Microphone removeShure VP-88 - M-S Stereo Microphone with Internal Matrix, Batter removeSENNHEISER ME-66 Shotgun Electret Microphone - Capsule removeAKG C 568B HYPERCARDIOID CONDENSER SHORT SHOTGUN MICROPHONE removeSENNHEISER ME-62 OMNI-DIRECTIONAL MIC CAPSULE for K6 and K6P POW remove
Image
SKU134.800SM81-LCVP88H10SE00011C 568BH10SE00009
Rating
Price 139.00 incl. GR VAT 345.00 incl. GR VAT 1,491.83 incl. GR VAT 155.00 incl. GR VAT 414.00 incl. GR VAT 150.00 incl. GR VAT
Stock

In stock

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

In stock

In stock

In stock

AvailabilityIn stockOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)In stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The MPM-2000 from Marantz Professional is a cardioid condenser microphone with a gold-plated, 34mm-diameter diaphragm capsule that captures audio in high-quality critical recording applications. It can be used by engineers, musicians, and producers in environments such as recording studios, for live stage, in project studios, and more.

The microphone is great for recording closely spaced subjects by maintaining a good degree of isolation, and is also an excellent choice for recording live performances when sound comes from many directions. The tightly defined pattern preserves excellent isolation and prevents unwanted feedback. A shockmount, pop filter, and aluminum carry case are also included.

 

 Sound Field


Mono
Transducer Condenser
Diaphragm 1.34" (34 mm)
Polar Pattern Cardioid
Frequency Range 20 Hz to 20 kHz
Signal to Noise Ratio 80 dB 
Maximum SPL 137 dB SPL
Impedance 55 ohms +/- 30% @ 1 kHz
Load Impedance 1000 ohms
Sensitivity -32 dB @ 1 kHz, re: 1 V/Pa
Power Requirements 48 V
Output Connectors 3-pin XLR

 Cardioid Condenser with 10dB Attenuator and 3 Position Low-Cut Filter

One of the world's great studio microphones, the SM81 provides precise, detailed sound reproduction, is excellent for studio recording, and is rugged enough for live sound reinforcement.

  • A standard for acoustic instruments, including guitar and cymbals
  • Selectable, low-frequency response -- either flat, 6dB/octave roll-off, or 18 dB/octave roll-off
  • Built-in, switchable 10 dB attenuator for use in high SPL situations
  • Phantom power only
  • Windscreen included
  • Low noise and high output clipping
  • Cardioid condenser
  • Frequency response: 20 to 20,000 Hz

 

The Shure Model VP88 is a single-point, stereo condenser microphone for use in professional studio recording, field production, electronic news gathering (ENG), and studio broadcasting applications. It combines two condenser cartridges in a single housing to create a stereo audio image of the sound source. It is unique in its ability to capture the realism of a live event and yet withstand rigorous field production environments.

The VP88 uses a mid-side (M-S) configuration. One microphone cartridge (Mid) faces forward to capture on-axis sound using a cardioid pickup pattern. The other microphone cartridge (Side) is bi-directional, capturing sound from either side. The VP88 contains an internal M-S matrix with three settings for different degrees of stereo image seperation. The internal matrix can be bypassed if an external matrix is used or if stereo imaging is done in post-production. Switches on the top of the microphone control output mode, stereo imaging, low-frequency rolloff settings, and battery on/off.

The VP88 can operate on phantom power or an internal 6V battery. The VP88 is supplied with a multi-connector "Y-splitter" cable, foam windscreen, swivel stand adapter, 6-volt battery, and zippered carrying/storage bag. Optional accessories include an isolation mount, a 7.6 m (25 ft) microphone extension cable, a phantom power supply, and a 4.3 m (14 ft) microphone stand.

  • Time-coherent, Mid-Side (M-S) design for optimal stereo imaging
  • Built-in stereo matrix for direct control of the stereo spread; direct M-S outputs available
  • Mono compatibility ideal for broadcast applications
  • 40 to 20,000 Hz frequency response
  • Low noise and distortion
  • Wide dynamic range
  • Switch-selectable, low-frequency rolloff (12 dB/octave below 80 Hz) for reduced pickup of ambient noise and stand vibration
  • Operates on phantom power or a 6V camera battery
  • LED power indicator
  • Internal shock mount for reduced stand vibration and handling noise
  • Built-in "pop" screen
  • Includes windscreen, swivel adapter, and Y-cable

The ME 66 is a shot gun microphone head designed for use with the K6 and K6P powering modules. It is especially suitable for reporting, film and broadcast location applications and for picking up quiet signals in noisy or acoustically live environments as it discriminates against sound not emanating from the main pick-up direction. Matt black, anodised, scratch-resistant finish.

Pick-up pattern : super-cardioid/lobar
Sensitivity in free field, no load (1kHz) : 50 mV/Pa +- 2,5 dB
Nominal impedance : 200 Ohm (K6)
Min. terminating impedance : 1000 Ohm ( K6)
Equivalent noise level : 10 dB
Dimensions : d 22,5 x 221 mm
Weight : 65 g

C 568 B 

Compact, short shotgun microphone
Integrated, switchable bass cut filter minimizes mechanical noise
Operates on phantom power
 
High directivity and wide frequency response in a relatively short shotgun make this
microphone a perfect tool for theater, sound reinforcement, and film/TV applications.
Due to its compact and lightweight design, the C 568 B is ideal for camera mount
applications. Below 500 Hz it functions as a hypercardioid microphone; above 500 Hz
the acoustic interference tube introduces increasing directivity. A switchable 12 dB/
octave 120 Hz bass cut filter effectively suppresses rumble and wind noise. The rugged,
all-metal body contains the built-in preamp. Phantom powering (9?52 V) required; foam
windscreen and stand adapter included.
 
SPECIFICATIONS:
Polar pattern hypercardioid/directional
Frequency range 20 to 20,000 Hz
Sensitivity 11 mV/Pa (-39 dBV)
Max. SPL 128 dB
Equivalent noise level (CCIR 468-3) 29 dB
Equivalent noise level 18 dB-A
Signal/noise ratio 76 dB
Bass filter 12 dB/octave at 120 Hz
Impedance 600 ohms
Recommended load impedance >2000 ohms
Supply voltage 9 to 52 V phantom power to DIN 45596
Current consumption

The ME 62 is an omni-directional microphone head suitable for K6 and K6P
powering modules. It can be used for reporting, discussions and interviews.
The ME 62 is particularly suitable for good reproduction of 'room' ambience
and 'spaced omni' stereo recording. Matt black, anodised, scratch-resistant finish.

Features
Omni-directional pick-up pattern
Minimal inherent self-noise
Excellent rejection of rumble, wind and handling noise
Wide frequency response
High maximum sound pressure level
Integral pop filter
Delivery Includes
1 ME 62

Technical Data
Pick-up pattern  omni 
Sensitivity in free field, no load (1kHz)  31 mV/Pa +- 2,5 dB 
Nominal impedance  200 Ohm (K6) 
Min. terminating impedance  1000 Ohm (K6) 
Equivalent noise level  15 dB 
Equivalent noise level weighted as per CCIR 468-3  27 dB 
Dimensions  d 22,5 x 94 mm 
Weight  30 g 

Weight1.00 kg0.60 kg0.60 kg0.65 kg0.71 kg0.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 0.60 kg
Weight 0.60 kg
Weight 0.65 kg
Weight 0.71 kg
Weight 0.30 kg