AKG C 519 M Miniature Clip-on Condenser Microphone

• Mini condenser microphone with clip-on mount and flexible gooseneck
  
• Polar pattern: cardioid
  
• Frequency range: 60 Hz to 20 kHz
  
• Sensitivity: 5 mV/Pa (-46 dBV)
  
• Max. SPL: 130/132 dB SPL (for 1 %/3 % THD)
  
• Equivalent noise level: 31 dB(A)
  
• Power requirement: B 29 L battery power supply, MPA V L phantom adapter, AKG WMS bodypack transmitters
  
• Connector: 3-pin XLR
  
• Cable: 1.5 m (5 ft.)
  
• Finish: Matte black
  
• Adapter plate included for easy attachment to PT 400 and PT 40.

    Designed for Broadcast, House of Worship, Pro Music, and other applications.
    Half-cardioid polar pattern
    Boundary layer
    Ultra-thin profile (16 mm) housing
    Rubber non-slip bottom pad and strong steel screen
    Integrated pop filter

Case Material    Die cast zinc
Connector Type    3-pin XLR
Element    Back Electret Condenser
Finish    Non-reflecting Black
Finish    White
Impedance, Low-Z balanced    200 Ω
Mic Type    Boundary
Open Circuit Voltage    25 mV/Pascal
Polar Pattern    Cardioid
Wired/Wireless    Wired
Height    16 mm (0.63“)
Width    94 mm (3.7“)
Depth    123 mm (4.84“)
Weight Net    12.63 oz (358 g)

The evolution e 908 instrument microphone is available in four variants:
as e 908 D for drums and percussion
as e 908 B for wind instruments, congas, and drums with free-floating suspension system
as e 908 B ew for the wireless miking of saxophones using an evolution wireless instrument transmitter
as e 908 T ew for the wireless miking of trumpets using an evolution wireless instrument transmitter

Pick-up pattern : cardioid
Frequency response : 40 ... 20 000 Hz
Sensitivity in free field, no load : (1kHz) 4 mV/Pa, 0,56mV/Pa (e 908T-ew)
Equivalent noise level : e908B-ew = 30 dB(A); e908B & e908D = 35 dB(A), e908T-ew = 39 dB (A)
Max. Sound pressure level (aktiv) : 147 dB
Nominal impedance : 100 Ohm (e908B & e908D)
Min. terminating impedance : 2000 Ohm (e908B & e908D)
Phantom powering : 12 - 48 V / 3 mA (e908B & e908D)
Weight : ca. 140 g
Dimensions : Ø 47 x 193 mm

• Miniature cardioid condenser clamp-on microphone with shock mounted capsule, ideal for miking drums and percussions plus brass
• For use with the B 29 L battery power supply, MPA V L phantom power adapter, or PT 40 or PT 400 transmitters (AKG WMS bodypack transmitters)
• Includes an AKG W 44 Windscreen, an AKG A 518 stabilizer knee, a 5-ft. (1.5-m) plug-in connecting cable with 3-pin mini XLR connector, an A 400 adapter for attaching a PT 40 or PT 400 bodypack transmitter and a protective case
• Integrated gooseneck
• Continuously adjustable vice type clamp
• Type: pre-polarized condenser microphone
• Polar pattern: Cardioid
• Frequency range: 60 Hz to 20,000 Hz
• Sensitivity at 1 kHz: 5 mV/Pa (-46 dBV re 1 V/Pa)
• Impedance: = 200 ohms
• Recommended load impedance: = 2000 ohms
• Max. SPL for 1%/3% THD: 130/132 dB SPL
• Equivalent noise level: 31 dB(A) to DIN 45412
• Cable length / Connector: 1.5 m (5 ft.) / 3-pin mini XLR
• Finish: Matte black
• Size (microphone only): length: 200 mm (7.9 in.), max. width: 47 mm (1.9 in.)
• Net weight (microphone and cable): C 518 M: 220 g (7.8 oz.), C 518 ML: 110 g (3.9 oz.)
• Shipping weight: C 518 M: 450 g (15.9 oz.), C 518 ML: 330 g (11.7 oz.)

Polar pattern    Cardioid
Frequency range    70 to 18,000 Hz
Max. SPL    125 dB (for 1% THD)
Equivalent noise level    73 dB
Impedance    =2,000 ohms
Supply voltage    9 to 52 V phantom power to IEC 61938 (DPA adapter integrated)
Powering   

2-inch (30 cm) Gooseneck Condenser Microphone, Cardioid, Attached XLR Preamp, Shock Mount, Flange Mount, Snap-Fit Foam Windscreen, Mute Switch, LED Indicator.

The Microflex Gooseneck microphones bring a whole new meaning to the word flexible. Beyond their fully adjustable goosenecks lies a new level of flexibility the new Microflex interchangeable condenser microphone cartridge. Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a broad variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the new Microflex product line for enhanced convenience and consistent sound.

Features

• Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
• Interchangeable cartridges provide the right polar pattern for every application
• Balanced, transformerless output for increased immunity to noise over long cable runs
• Shock mount that provides over 20 dB isolation from surface vibration noise
• Locking flange mount for permanently securing microphone to lecterns, pulpits, or conference tables
• Snap-fit foam windscreen

Specifications

• Frequency Response: 50Hz to 17kHz
• Polar Pattern: Cardioid
• Output Impedance: rated at 150 ohms (180 ohms actual)
• Maximum SPL: 124.2 dB
• Signal to Noise Ratio: 66.0 dB
• Dynamic Range: 96.2 dB
• Power Requirements: 11 to 52 Vdc phantom, 2.0 mA