| Content | Your go-to mic to goIntroducing the First studio quality
mic preamp for the iOS platform
Here's how you use it: Take the microphone you use every day on stage or in the studio and plug it into your iOS device. It's that simple. Need Phantom Power? Flip the "Phantom Power" switch. Congratulations, you've just become a professional user.
This is perhaps the most important product introduction for musicians and the rest of the civilized world since the iPod and iPad. Now, thanks to the iRig Pre, you can hook your favorite microphone to your iOS device and join the mobile music revolution. Create music any time, anywhere with your own high quality microphones on your iPhone, iPod touch or iPad.
So now if you want to record that special riff using your own ribbon microphone and mix it on your iPhone, you can. Simply plug the iRig Pre into the headphone jack of your iOS device, activate phantom power if necessary, launch your recording software and wail away.
Hey, is that a Preamp in your pocket?
Why yes, as a matter of fact it is! The iRig PRE sports an ultra-compact design so it fits pretty much anywhere. Just slightly larger than a 9 volt battery, you'll be amazed at how quickly you'll misplace your iRig PRE. But don't let the small size fool you. iRig Pre is a professional sounding mic preamp that will dazzle you and your friends.
Specs iRig PRE Specifications
- Frequency response: from 20 Hz to 20 kHz +/- 1.5dB
- Noise: -98 dB fullband, phantom power ON
- Maximum output level: 2 Vrms
- Distortion: 0.025% THD
- Phantom max current: 6mA
- Battery duration (Alkaline 9V cell): approx 30 hours when phantom is off, approx 10 hours when phantom is on
| Package includes |
Dimensions |
- iRig PRE
- 9V Battery
- Velcro Strip
|
- 32mm/1.26" x 35mm/1.38" x 83mm/3.27“
(W x L x H)
- Cable lenght: 450mm/17.72“
(Connector included)
- Weight: 100g/3.53oz (Battery included)
|
Requirements iOS Devices
iRig PRE is compatible with iPhone 5s, iPhone 5c, iPhone 5, iPhone 4S, iPhone 4, iPhone 3GS, iPod touch (5th, 4th and 3rd generation), iPad Air, 4th generation, iPad 3rd generation, iPad 2, iPad and iPad mini. iOS 4.3 or later is required.
Android Devices
Works with most Android devices including: Google Nexus S, HTC Desire HD, Samsung Galaxy S III, Samsung Galaxy S II, Samsung Galaxy W, Samsung Galaxy S, Samsung Galaxy Note, Samsung Galaxy Nexus, Samsung Galaxy Tab 10.1, Samsung Galaxy Tab 7 plus.
Mac®: Most Mac computers starting from late 2008 are compatible with the exception of the Mac Pro line.
To check if your Mac is compatible select: About This Mac > More Info > System Report > Audio
and check that "External Microphone / iPhone headset" is appearing on the list of included features. |
Collaborate. Capture. Create.
The amazing GO GUITAR is the only mobile interface you’ll need to record quick, on-the-go riffs anywhere, anytime with your iOS*, Android*, Mac* or PC mobile device. Just want to practice without the hassle of hauling around amps or blowing your roof off? Simply plug your electric or bass guitar into GO GUITAR along with your favorite pair of headphones. Jam or record literally anywhere you can fit yourself and your guitar.
Take It Anywhere
Whether you’re in your kitchen, relaxing in the park, or on the tour bus, GO GUITAR lets you create whenever and wherever the mood strikes. All you need is this simple guitar interface, a mobile device, and of course, your guitar!
APP-ly Some Effect
Want to add some effects to your guitar or record the riffs you’ve been working on? GO GUITAR integrates seamlessly with the creative suite of TC Helicon mobile apps. When it comes to sparking your creativity, TC Helicon has you covered with an extensive array of mobile applications designed specifically for your GO GUITAR device, including effects, processing and much more – plus they are all free to download from your app store! And if that's not enough, GO GUITAR is also compatible with a wide range of apps and software from 3rd-party vendors.
Can You Hear Yourself?!
Whether you want to jam in silence, or provoke noise-induced rage into your neighbors, GO GUITAR has you covered. Just connect some headphones to your GO GUITAR and hear yourself as you record or play with crystal clarity.
Not Just for Guitar
Yes, the word “Guitar” is in the name, but that’s not GO GUITAR’s only game! You can also use the line-in for your keyboard, mixer, or any other line-level audio device. GO GUITAR records high-quality recordings.
Record That Riff
Once you’ve solidified that hit-making hook, feel confident that you can capture high quality audio directly to your iOS, Android, Mac, or PC device using your favorite recording DAW. GO GUITAR ensures a broad dynamic range for a distortion-free audio signal so you can rest assured that the recording you create will compete with the rest of the world.
Strap It On
For those times when you’re crammed into an awkward space with nowhere to put your GO GUITAR, you can use the integrated clip and easily strap it onto your belt or guitar strap.
Guitar Interface
- Suitable for mobile iOS and Android devices, PC and Mac
- Instrument input for guitar, bass or other instruments (6.3 mm jack)
- Output for connecting an external amplifier (6.3 mm jack)
- Headphone output (3.5 mm)
- Rotary wheel for input level
- Selection switch for direct signal or FX signal
- Dimensions: 92 x 45 x 27 mm
- Weight: 70 g
| The SmartRig-2 XLR Audio Adapter is an easy solution to connect any professional microphone to an iPhone, iPod touch, or iPad and Android devices.
As a high-quality microphone preamp, SmartRig allows you to use professional stage microphones or high-end studio microphones to be used as reporter mics in live situations with your mobile iOS or Android devices as the mobile transmitter to your studio.
it also supports HD Voice with its bandwidth of 20-20.000 Hz
A great complementary product for D&R GSM Hybrid is the Audio Adapter SmartRig 2 that, can offer as an \"in the Field\" product.
Together with a dynamic or condenser Mic, headphones and a smart-phone (Android or Apple) running a recording app on it could be your complete mobile reporter set for a minimum of investment.
Live reporting to the Studio in Voice-HD directly to D&R GSM Hybrid is now possible (depends on your GSM and provider)
Features
- XLR microphone input connector
- +48V phantom power for use with condenser microphones
- 3.5 mm Headphone output for monitoring
- On/Off/+48V switch
- Gain control
- Power/Phantom Power provided by 9V battery (not included)
Specifications
- Frequency Response: 20Hz to 20kHz (+/- 1.5dB)Noise: -98 dB full band (with Phantom Power)
- Maximum Output Level: 2 Vrms
- Distortion: 0.025% THD
- Phantom Max Current: 13mA
- Dimensions: 8.8cm x 4.1cm x 4.2cm
- Weight: 75g (2.57oz)
Included in the box
- 1x SmartRig
- 1x User Guide
- 1x Velcro Strip
- 1x Warranty Card
| The AI-Micro is an ultra-compact dual-channel audio interface that can connect almost any microphone with a 3.5mm connector to computers and mobile devices. It delivers broadcast-grade audio and includes a high-quality headphone output.
In the box :
- 1 x AI-Micro
- 1 x USB Type-C to Lightning (SC21, 300mm length)
- 1 x USB Type-C to USB Type-C (SC22, 300mm length)
- 1 x USB Type-C to USB Type-A (SC23, 300mm length)"
The interface's two mic inputs are auto-sensing jacks, allowing them to accept signal from a broad range of TRS/TRRS microphones without needing additional adapters. Monitor the live signal or playback via the built-in, zero-latency headphone port, and connect to virtually any mobile device or computer with the supplied USB Type-C, USB Type-A, and Lightning cables.
With two mini-jack mic inputs and a USB Type-C output, the AI-Micro lets you simultaneously record two mics to your computer or mobile device at up to 24-bit / 48 kHz digital resolution. It's ideal for interviews, podcasts, live streaming, and more. Alternatively, input 1 can be configured as a single stereo TRS input for use with stereo microphones.
The two 3.5mm inputs are auto sensing and detect whether a TRS or TRRS microphone is connected, automatically switching to accommodate a wide variety of separately available mics such as the SmartLav+, Lavalier GO, RODELink Lav, any VideoMic with 3.5mm outputs, and more.
The AI-Micro also features a high-quality 3.5mm headphone output for zero-latency audio monitoring and playback.
Thanks to the supplied cables, the AI-Micro can connect seamlessly to USB Type-A, USB Type-C, and Lightning devices. Use it with your Mac/Windows computer, iPhone, iPad, or Android smartphone/tablet.
It is compatible with the Rode app suite including Rode Central, Rode Connect, and Rode Reporter, for accessing expanded features and functionality, on-the-go configuration, and broadcast-quality recording on any device.
Easily held in the palm of your hand or tucked away in your pocket, the AI-Micro boasts an exceptionally small footprint. Plus, it is bus powered, so you never have to worry about swapping batteries or recharging it.
- Ultra-compact dual-channel audio interface
- Compatible with USB-A, USB-C and Lightning devices
- Two auto-sensing TRS/TRRS microphone inputs
- 3.5mm headphone output
- Expanded features and functionality via RØDE app suite, including RØDE Central, RØDE
Connect and RØDE Reporter
COMPATIBLE RØDE PRODUCTS :
- SmartLav+
- Lavalier GO
- RØDELink Lav
- All VideoMics with 3.5mm output
- SC15, SC16, SC17, SC18, SC19
| Frequency Response |
20Hz to 20kHz |
| Headphone Output Power |
125mW into 32Ω |
| Input Dynamic Range |
100dB A-Weighted |
| Gain Range |
0-26dB analog gain |
| Analog Inputs |
2 x 3.5mm auto-sensing TRS/TRRS |
| Analog Outputs |
3.5mm TRS headphone output |
| Computer Connectivity |
USB Type-C |
| OS Requirements |
macOS Big Sur and higher
Windows 10 (Build 19041) and higher
iOS 14 and higher
Android 9.0 and higher |
| Simultaneous I/O |
2/2 |
| Number of Preamps |
2 |
| Bit Depth |
24-bit |
| Sample Rates |
44.1/48kHz |
| Power Requirements |
Bus Powered |
| Dimensions (mm) |
40 x 11.1 x Height: 38.2 |
| Weight (g) |
13 |
| TC Helicon GO GUITAR PRO Guitar Interface for Mobile Devices
With Midas preamplifier
Suitable for mobile iOS and Android devices, PC and Mac
24 bit / 48 kHz A/D converter
Frequency response: 20 - 20000 Hz, +0/-1 dB
HiZ instrument input: 6.3 mm jack
Headphone output with adjustable level: 3.5 mm jack
Rotary knob for input level (Gain)
Selector switch for direct signal or FX signal
Dimensions: 92 x 45 x 27 mm
Weight: 110 g
The TC Helicon GO GUITAR PRO Guitar Interface lets you record and capture your ideas whenever inspiration strikes. With its pocket-sized enclosure, you can take this with you wherever you go, safe in the knowledge that no idea will slip your grasp again. Simply connect your instrument (or line-level audio device), plug your headphones in, connect your mobile/tablet/laptop, and you're set.
There's no audible latency so it's also the perfect tool for a quick private jam with top quality audio fidelity. This means you can make sure your desired tone is spot on with the award-winning Midas preamp giving you a polished sound every time.
Use the companion app to access amp modelling and digital effects on the fly, this isn't a hassle as you're likely already connected so no extra devices needed. The selectable thru/FX allows you to switch between the unfiltered, clean signal and the processed, effect-filled wet signal for additional sonic versatility. The Go Guitar Pro is the ultimate companion tool for creatives that strive to never waste a moment of spontaneous inspiration. |
2-Channel USB2.0 Audio Interface with USB-C Connection
- 24 Bit / 192 kHz
- XLR/TRS combo input for microphones, line signals and instruments
- +48 V phantom power switchable
- VU meter
- Monitor level control
- Headphone level control
- Switchable direct monitoring with mix control
- 2 Line outputs: 6.3 mm jack, balanced
- Stereo headphone output: 6.3 mm jack
- Integrated USB-A hub (USB-MIDI, max. 250 mA)
- MIDI in / out
- USB bus-powered
- Colour: White
- Includes USB cable (type C to A) as well as Ableton Live Lite, NI Guitar Rig LE, Arturia Analog Lab Intro, Pre 1973, Plate 140, Tape 201, JUN 6
-
Recording / Playback Channels 2x2
Number of Instrument Inputs 2
Number of S/PDIF Connectors 0
Number of ADAT Connectors 0
Numer of AES/EBU Connectors 0
Number of MADI Connectors 0
Max. sample rate (kHz) 192 kHz
Max. resolution in bit 24 bit
|
Reviews
There are no reviews yet.