Content |
The all-in-one audio/MIDI interface that fits in your pocket. The only Interface you need for making music on the go.
Wouldn't it be great to have one compact portable interface for your iPhone, iPad or Mac that you could use to connect your studio mics, your guitar or bass, your keyboards and your MIDI controller, and play, practice and record on the go? Ta Da! Now you can with iRig PRO.
iRig PRO is the first full-featured compact audio and MIDI interface you can use with your XLR microphones, your guitar and bass, your keyboard or other line-level source and your MIDI controllers. It features an XLR/1/4" combo jack for connecting microphones and instruments (accepts XLR and 1/4" TS cables), and a MIDI input for plugging in your favorite controller.
Now when you're on the go, you can record vocals, harmonies, acoustic instruments, electric guitar/bass, keyboards and more without changing your interface and disrupting your creative flow. You will find iRig PRO to be the most versatile iPhone and iPad accessory in your gig bag. And when you get back to your Mac, plug iRig PRO into your USB port and keep jamming away on your laptop or desktop.
Compact
You'll be amazed by the compact design of the unit and what it actually delivers. About the size of a travel tube of toothpaste, iRig PRO fits nicely into small spaces like your gig bag, the accessory compartment of your hardshell case or the side pocket of your cargo shorts. Just don't forget about it and run it through the laundry.
Multiple personalities, universal connectivity
iRig PRO can handle all of your stuff, including XLR condenser mics, guitars and basses, keyboards and other line-level sources, and MIDI controllers. Whatever you're connecting to your device, iRig PRO has you covered. And iRig PRO comes with 3 connector cables: Lightning, 30-pin and USB, to ensure that you've got the right connections.
Specs iRig PRO Specifications - Instrument Input: unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
- Maximum Input Level: from 30 mVpp to 6.9 Vpp
- Instrument Input Impedance: 620 kOhms
- Microphone Input: balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Microphone Input Level: from 6 mVpp to 1.4 Vpp
- Microphone Input Impedance: approx 2 kOhms
- Gain Control Range: 47 dB
- Phantom Power: 48V +/-10%
- Input Noise: -97 dB RMS, -105 dB(A)
- Distortion (THD): 0.01%
- Frequency Response: 20Hz-20kHz +/- 0.5 dB
- Conversion: 24-bit A/D
- Sampling Rate: 44.1 and 48 kHz
- Battery: 9V (Alkaline suggested), needed for +48V phantom only
Package includes | Dimensions | - iRig PRO universal Audio-MIDI interface
- iOS lightning connection cable
- iOS 30-pin connection cable
- USB connection cable
- 2.5mm jack to MIDI cable
- 9V Battery
| - Size: 32mm/1.26" x 105mm/4.14" x 21mm/0.85"
(W x L x H) - Weight: ~40g/1.41oz
| Requirements iOS Devices
Compatible with iPhone 5, iPhone 4S, iPhone 4, iPod touch (5th, and 4th generation), iPad 4th generation, iPad 3rd generation, iPad 2, iPad and iPad mini. iOS 5.1 or later is required.
Mac®: Mac OS X 10.5 or later. One free USB port.
Windows®: Support using the ASIO4ALL driver on Windows XP/Vista/7/8. See our FAQ here for further details.
|
Meet Quartet The ultimate desktop audio interface and control center for iPad and Mac Apogee Quartet is a professional USB audio interface designed to deliver the ultimate desktop recording experience to the iPad and Mac-based studio. Featuring 4 inputs and 8 outputs of Apogeeʼs industry-leading AD/DA conversion technology as well as 4 world-class mic preamps, Quartet bridges the gap between the 2-channel Apogee Duet and Apogeeʼs flagship interface, Symphony I/O. Quartet for iPad and Mac features special circuitry designed to deliver professional performance for iPad use along with low latency USB 2.0 performance for Mac. Quartet's MIDI I/O connector lets you connect and power a Core MID compatible keyboard/controller while using Duet with your iPad or iOS device. Legendary Sound Quality Why Apogee Quartet is the best choice for your studio Apogee is an award-winning industry leader in digital recording technology with over 25 years of experience. Preferred by recording pros around the world, Apogee products like Duet, Ensemble and Symphony I/O have been instrumental in creating countless GRAMMY? and OSCAR? winning recordings and have set the industry standard in professional recording for over two decades. Quartet is built solidly on this reputation. Highlights: - First professional multi-channel audio interface for iPad - Direct digital connection to iPod touch, iPhone, iPad - Works with new iPhone 5, iPad (4th generation), iPad mini - (Appleʼs Lighting to 30-pin adapter required - Sold separately) - Works with GarageBand, Auria, MultiTrack and any Core Audio compliant app on iOS - Works with GarageBand, Logic, Pro Tools, Ableton and any Core Audio compliant app on Mac - Low latency monitoring, complete input/output control with Apogeeʼs Maestro software (iOS & Mac) - MIDI input/output (USB-A type connector) - DC power supplies charge to iPod touch, iPhone or iPad - USB 2.0 audio with 24-bit/192kHz A/D and D/A conversion - 4 Analog inputs with world-class mic preamps and selectable 48v phantom power - ADAT/SMUX digital Inputs - Monitor control - up to 3 speaker sets - 1 Independent 1/4? stereo headphone output - QuickTouch pads for input/output selection and advanced control - Legendary Apogee sound quality - Designed in California - Made in the U.S.A. |
Features
Works on any smartphone or tablet that supports Android 4.2 or higher and host mode/USB OTG
Works on Mac or PC via optional USB to Micro-USB cable.
Near-zero latency digital FX processing
Digital audio recording on Android 5.0 and Samsung Professional Audio Devices as well as Mac and PC
32-bit digital signal processor
24-bit converter with 44.1/48KHz sample rate
High-definition, low-noise preamp
Includes AmpliTube UA
Registration unlocks AmpliTube Metal, 25 Gear Credits for AmpliTube Custom Shop and T-RackS Classic for Mac/PC
Analog aux input for play-along and practice
Headphone output and volume control
Multicolor LED
Ultra-compact and lightweight design
Micro-USB port
|
The Tascam iXJ2 allows an Apple iPhone 4/4S, iPad or iPod Touch 4G to be used with preferred microphones or
line level sources (instruments) to create CD-quality audio recordings. This handy extension is simply plugged
into the dock connector of the iOS device and is connected with up to two mono or stereo sources that can be
selected via a switch. Switchable plug-in power for small microphones and mono summing for news gathering are
also available.
The built-in A/D converter ensures high audio quality and low noise. Separate input level controls and
two-colour level indicators for the left and right channels make level adjustments easy, and a switchable
limiter can reduce sudden peaks and thus protect against unforeseen overload.
The iXJ2 is powered through the dock connector, so no battery is required. A USB input is provided to charge
the iOS device for long recordings, either through a computer or a USB charger.
An appropriate 2-track recording application (Tascam PCM Recorder) for iOS devices can be downloaded from
AppStore at no charge.
Main Features
Use your favourite microphones or line level (instrument) sources to create high-grade stereo audio recordings
with an Apple iPhone 4/4S, iPad or iPod Touch 4G
Internal A/D converter allow recordings in CD quality (44.1kHz/16-bit)
Two unbalanced stereo input connectors (accept two mono or stereo sources)
Input selection switch (A/B/STEREO)
Switchable plug-in power
Selectable mono summing for news gathering
Limiter to avoid distorted recordings (selectable to either mono or stereo operation)
Separate input level rotary controls for channels L and R
Separate input level indicators for channels L and R (green/red)
Power supply via dock connector, no battery required
USB connector available for recharging the iOS device
Easy setup (attaches to the deviceʼs dock connector)
Tascam 2-track recording app can be downloaded from the Apple AppStore at no charge
Specifications
Inputs and outputs
Mic/Line input (A/B) 3.5-mm stereo mini jack (unbalanced)
Input impedance 2.2 kOhm (plug-in power ON)
10 kOhm (plug-in power OFF)
Nominal input level −66 dBV to −10 dBV
Maximum input level +6 dBV
iOS device recharging port USB Mini-B connector
iOS device connector 30-pin dock connector
Device support iPhone 4S, iPhone 4, iPad (3rd generation), iPad 2, iPad (1st generation), iPod touch
(4th generation)
Audio performance
Frequency range 20 Hz to 20 kHz +0/−2 dB (recording, JEITA)
S/N ratio 90 dB or more (recording, JEITA)
Power supply and other specifications
Power supply Provided through the iOS device connector
Power consumption 125 mW
Dimensions (W x H x D) 60 mm x 47 mm x 17 mm (including connector)
Weight 30 g
Operating temperature range 5–35 °C
Design and specifications subject to change without notice.
|
The Tascam iM2X turns an Apple iPhone 4, iPad or iPod Touch 4G into a powerful PCM audio recorder for CD-quality recordings. It consists of a pair of condenser microphones and a high-quality preamp and plugs into the dock connector of the iOS device. The microphone elements are XY oriented for clear stereo definition and minimal phase differences. Moreover, they are adjustable over 180 degrees for the best sound placement.
Unlike mics that use the iOS deviceʼs built-in preamp, the iM2X with its internal A/D converter ensures low noise and better linearity in frequency response. The microphone elements also used in Tascam DR series recorders can handle sound pressure levels up to 125 dB to capture the loudest concerts and instruments without distortion. Thanks to an input level control and a two-colour level meter, level adjustment is very simple. A switchable limiter also contributes to this by reducing sudden peaks and protecting against unforeseen overload.
The iM2X powered through the dock connector, so no battery is required. A USB input is provided to charge the iOS device for long recordings, either through a computer or a USB charger.
An appropriate 2-track recording application (Tascam PCM Recorder) for iOS devices can be downloaded from AppStore at no charge.
Main Features
Turns your Apple iPhone 4, iPad or iPod Touch 4G into a high-grade PCM audio recorder Stereo condenser microphone in XY orientation for clear stereo definition and minimal phase differences Accepts sound pressure level up to 125 dB SPL Microphone can be swivelled by 180 degrees to capture sound sources in front or behind the unit Allows recordings in CD quality (44.1kHz/16-bit) Input level rotary control Input level indicator (green/red) Switchable limiter to avoid distorted recordings Power supply via dock connector, no battery required USB connector available for recharging the iOS device Easy setup (attaches to the deviceʼs dock connector) Tascam 2-track recording app can be downloaded from the Apple AppStore at no charge Specifications
General Microphone type Cardioid condenser (stereo) Maximum input level 125 dB SPL Input level adjustment range 0–40 dB Frequency range 10 Hz – 20 kHz Sampling frequency 44.1 kHz Bit rate 16 bit iOS device recharging port USB Mini-B connector iOS device connector 30-pin dock connector Device support iPhone 4S, iPhone 4, iPad (3rd generation), iPad 2, iPad or iPod touch (4th generation) Power supply and other specifications Power supply Provided through the iOS device connector Power consumption 90 mW Dimensions (W x H x D) 56 mm x 57 mm x 22 mm (including connector) Weight 30 g Operating temperature range 5–35 °C Design and specifications subject to change without notice. | The most popular guitar interface of all time just got better
How do you improve upon something so revolutionary that it changed the world? iRig 2 is the answer.
In 2010, for the first time ever, the original iRig allowed guitar and bass players to plug into their iPhone and use their mobile device to play, practice and record with apps like IK's AmpliTube, Appleʼs GarageBand and thousands more.
iRig 2 builds upon the success of its predecessor by introducing essential new features — like adjustable input gain, cross-platform compatibility and a 1/4" amplifier output — that will once again revolutionize the way you make your music while on the go.
Now everyone can plug in their guitar, bass or other instrument and enjoy killer tone on their iPhone, iPad, iPod touch, Mac or Android device — with the release of iRig 2, the worldʼs most popular guitar interface is now better than ever before.
Plug and play simplicity on every device
If you loved iRig's versatility, you'll love iRig 2's new adjustable gain dial, whcih works with its built-in 1/8" TRRS output connector to give you a true plug-and-play experience with your iPhone, iPad, iPod touch, Mac or Samsung Professional Audio compatible Android device.
Volume levels vary from instrument to instrument and from device to device. And while the original iRig provided superior sound, it was limited in that you were unable to customize the input gain level to your particular setup. With iRig 2, you get an input gain dial that gives you the power to ensure high-quality sound in every situation. This means that you'll be able to perform at your best no matter whether you're connecting a wailing 3 humbucker electric guitar to your Samsung Galaxy Note 4 or a jazzy archtop to your iPhone 6.
Likewise, its 1/4” instrument input works with your guitar, bass or any line-level instrument. Just plug into it like you would into a stompbox or amplifier. Itʼs as simple as that.
- The sequel to the best-selling iRig interface
- 1/4” instrument input for use with guitar, bass and other line instruments
- 1/4” amplifier output for use with an external amplifier without an adaptor
- 1/8” TRRS output for use with iPhone, iPad, iPod touch, Mac and Android
- 1/8” headphone output
- Compact and lightweight design
- Selectable dual-mode switch: FX and THRU
- Input gain thumbwheel for easy signal control
- Comes with microphone stand Velcro strip
- Comes with AmpliTube FREE and a full suite of powerful IK applications and software
A digital rig with physical presence
With iRig 2, youʼll be able to enjoy IKʼs full range of AmpliTube apps (the #1 app for guitar players). It's ready to go right out of the box. It comes with a powerful cross-platform suite of apps and software that includes free versions of AmpliTube for iOS, Android and Mac/PC.
To use, just download your preferred version for iOS from the App Store or for Android from the Google Play Store or from Samsung GALAXY Apps. Then plug your guitar or bass into iRig 2, plug your amplifier or headphones into your device and launch the app.
Specs iRig 2 Specifications
- Input Impedance: 380 kOhms
- Frequency Response: 20Hz-20kHz +/- 0.2 dB
- Instrument Input Connection: 1/4" Jack
- Amplifier Output Connection: 1/4" Jack
- Device Output Connection: 1/8" TRRS Jack
- Headphone Output Connection: 1/8" Jack
Package includes
- iRig 2 guitar interface
- Detachable microphone stand Velcro-slot
- Velcro strip
Dimensions
- Size: 72mm/2.83" x 39mm/1.54" x 21mm/0.85“
- Weight: 43g/1.57oz
|
Reviews
There are no reviews yet.