| Content |
The all-in-one audio/MIDI interface that fits in your pocket. The only Interface you need for making music on the go.
Wouldn't it be great to have one compact portable interface for your iPhone, iPad or Mac that you could use to connect your studio mics, your guitar or bass, your keyboards and your MIDI controller, and play, practice and record on the go? Ta Da! Now you can with iRig PRO.
iRig PRO is the first full-featured compact audio and MIDI interface you can use with your XLR microphones, your guitar and bass, your keyboard or other line-level source and your MIDI controllers. It features an XLR/1/4" combo jack for connecting microphones and instruments (accepts XLR and 1/4" TS cables), and a MIDI input for plugging in your favorite controller.
Now when you're on the go, you can record vocals, harmonies, acoustic instruments, electric guitar/bass, keyboards and more without changing your interface and disrupting your creative flow. You will find iRig PRO to be the most versatile iPhone and iPad accessory in your gig bag. And when you get back to your Mac, plug iRig PRO into your USB port and keep jamming away on your laptop or desktop.
Compact
You'll be amazed by the compact design of the unit and what it actually delivers. About the size of a travel tube of toothpaste, iRig PRO fits nicely into small spaces like your gig bag, the accessory compartment of your hardshell case or the side pocket of your cargo shorts. Just don't forget about it and run it through the laundry.
Multiple personalities, universal connectivity
iRig PRO can handle all of your stuff, including XLR condenser mics, guitars and basses, keyboards and other line-level sources, and MIDI controllers. Whatever you're connecting to your device, iRig PRO has you covered. And iRig PRO comes with 3 connector cables: Lightning, 30-pin and USB, to ensure that you've got the right connections.
Specs iRig PRO Specifications - Instrument Input: unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
- Maximum Input Level: from 30 mVpp to 6.9 Vpp
- Instrument Input Impedance: 620 kOhms
- Microphone Input: balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Microphone Input Level: from 6 mVpp to 1.4 Vpp
- Microphone Input Impedance: approx 2 kOhms
- Gain Control Range: 47 dB
- Phantom Power: 48V +/-10%
- Input Noise: -97 dB RMS, -105 dB(A)
- Distortion (THD): 0.01%
- Frequency Response: 20Hz-20kHz +/- 0.5 dB
- Conversion: 24-bit A/D
- Sampling Rate: 44.1 and 48 kHz
- Battery: 9V (Alkaline suggested), needed for +48V phantom only
| Package includes | Dimensions | - iRig PRO universal Audio-MIDI interface
- iOS lightning connection cable
- iOS 30-pin connection cable
- USB connection cable
- 2.5mm jack to MIDI cable
- 9V Battery
| - Size: 32mm/1.26" x 105mm/4.14" x 21mm/0.85"
(W x L x H) - Weight: ~40g/1.41oz
|
Requirements iOS Devices
Compatible with iPhone 5, iPhone 4S, iPhone 4, iPod touch (5th, and 4th generation), iPad 4th generation, iPad 3rd generation, iPad 2, iPad and iPad mini. iOS 5.1 or later is required.
Mac®: Mac OS X 10.5 or later. One free USB port.
Windows®: Support using the ASIO4ALL driver on Windows XP/Vista/7/8. See our FAQ here for further details.
| The most popular guitar interface of all time just got better
How do you improve upon something so revolutionary that it changed the world? iRig 2 is the answer.
In 2010, for the first time ever, the original iRig allowed guitar and bass players to plug into their iPhone and use their mobile device to play, practice and record with apps like IK's AmpliTube, Appleʼs GarageBand and thousands more.
iRig 2 builds upon the success of its predecessor by introducing essential new features — like adjustable input gain, cross-platform compatibility and a 1/4" amplifier output — that will once again revolutionize the way you make your music while on the go.
Now everyone can plug in their guitar, bass or other instrument and enjoy killer tone on their iPhone, iPad, iPod touch, Mac or Android device — with the release of iRig 2, the worldʼs most popular guitar interface is now better than ever before.
Plug and play simplicity on every device
If you loved iRig's versatility, you'll love iRig 2's new adjustable gain dial, whcih works with its built-in 1/8" TRRS output connector to give you a true plug-and-play experience with your iPhone, iPad, iPod touch, Mac or Samsung Professional Audio compatible Android device.
Volume levels vary from instrument to instrument and from device to device. And while the original iRig provided superior sound, it was limited in that you were unable to customize the input gain level to your particular setup. With iRig 2, you get an input gain dial that gives you the power to ensure high-quality sound in every situation. This means that you'll be able to perform at your best no matter whether you're connecting a wailing 3 humbucker electric guitar to your Samsung Galaxy Note 4 or a jazzy archtop to your iPhone 6.
Likewise, its 1/4” instrument input works with your guitar, bass or any line-level instrument. Just plug into it like you would into a stompbox or amplifier. Itʼs as simple as that.
- The sequel to the best-selling iRig interface
- 1/4” instrument input for use with guitar, bass and other line instruments
- 1/4” amplifier output for use with an external amplifier without an adaptor
- 1/8” TRRS output for use with iPhone, iPad, iPod touch, Mac and Android
- 1/8” headphone output
- Compact and lightweight design
- Selectable dual-mode switch: FX and THRU
- Input gain thumbwheel for easy signal control
- Comes with microphone stand Velcro strip
- Comes with AmpliTube FREE and a full suite of powerful IK applications and software
A digital rig with physical presence
With iRig 2, youʼll be able to enjoy IKʼs full range of AmpliTube apps (the #1 app for guitar players). It's ready to go right out of the box. It comes with a powerful cross-platform suite of apps and software that includes free versions of AmpliTube for iOS, Android and Mac/PC.
To use, just download your preferred version for iOS from the App Store or for Android from the Google Play Store or from Samsung GALAXY Apps. Then plug your guitar or bass into iRig 2, plug your amplifier or headphones into your device and launch the app.
Specs iRig 2 Specifications
- Input Impedance: 380 kOhms
- Frequency Response: 20Hz-20kHz +/- 0.2 dB
- Instrument Input Connection: 1/4" Jack
- Amplifier Output Connection: 1/4" Jack
- Device Output Connection: 1/8" TRRS Jack
- Headphone Output Connection: 1/8" Jack
Package includes
- iRig 2 guitar interface
- Detachable microphone stand Velcro-slot
- Velcro strip
Dimensions
- Size: 72mm/2.83" x 39mm/1.54" x 21mm/0.85“
- Weight: 43g/1.57oz
|
The Tascam iM2X turns an Apple iPhone 4, iPad or iPod Touch 4G into a powerful PCM audio recorder for CD-quality recordings. It consists of a pair of condenser microphones and a high-quality preamp and plugs into the dock connector of the iOS device. The microphone elements are XY oriented for clear stereo definition and minimal phase differences. Moreover, they are adjustable over 180 degrees for the best sound placement.
Unlike mics that use the iOS deviceʼs built-in preamp, the iM2X with its internal A/D converter ensures low noise and better linearity in frequency response. The microphone elements also used in Tascam DR series recorders can handle sound pressure levels up to 125 dB to capture the loudest concerts and instruments without distortion. Thanks to an input level control and a two-colour level meter, level adjustment is very simple. A switchable limiter also contributes to this by reducing sudden peaks and protecting against unforeseen overload.
The iM2X powered through the dock connector, so no battery is required. A USB input is provided to charge the iOS device for long recordings, either through a computer or a USB charger.
An appropriate 2-track recording application (Tascam PCM Recorder) for iOS devices can be downloaded from AppStore at no charge.
Main Features
Turns your Apple iPhone 4, iPad or iPod Touch 4G into a high-grade PCM audio recorder
Stereo condenser microphone in XY orientation for clear stereo definition and minimal phase differences
Accepts sound pressure level up to 125 dB SPL
Microphone can be swivelled by 180 degrees to capture sound sources in front or behind the unit
Allows recordings in CD quality (44.1kHz/16-bit)
Input level rotary control
Input level indicator (green/red)
Switchable limiter to avoid distorted recordings
Power supply via dock connector, no battery required
USB connector available for recharging the iOS device
Easy setup (attaches to the deviceʼs dock connector)
Tascam 2-track recording app can be downloaded from the Apple AppStore at no charge
Specifications
General
Microphone type Cardioid condenser (stereo)
Maximum input level 125 dB SPL
Input level adjustment range 0–40 dB
Frequency range 10 Hz – 20 kHz
Sampling frequency 44.1 kHz
Bit rate 16 bit
iOS device recharging port USB Mini-B connector
iOS device connector 30-pin dock connector
Device support iPhone 4S, iPhone 4, iPad (3rd generation), iPad 2, iPad or iPod touch (4th generation)
Power supply and other specifications
Power supply Provided through the iOS device connector
Power consumption 90 mW
Dimensions (W x H x D) 56 mm x 57 mm x 22 mm (including connector)
Weight 30 g
Operating temperature range 5–35 °C
Design and specifications subject to change without notice. |
System Requirements iOS: Devices: iPad and iPhone 4
iOS version: 4.3 and later Connection: Dock connector port (no batteries required) *Software: Made for GarageBand Mac OS: Computer: Mac, with an Intel processor
Memory: 1 GB minimum of installed RAM, 2 GB recommended
Mac OS version: 10.6.4 or later
Connection: USB 2.0 Full Speed Software: GarageBand, Logic Pro, MainStage or any Core Audio compatible application Features -
PureDIGITAL instrument connection delivers pristine sound quality -
Designed for electric guitar and bass -
No confusing setup, you can start recording in minutes - Works with GarageBand on iPad and iPhone or with any Core Audio compatible application on a Mac
-
Control knob allows easy input level adjustment -
Multicolor LED for status indication and input level monitoring -
Studio quality instrument preamp with up to 40dB of gain -
High quality locking output connects directly to iPad and iPhone or USB port on a Mac -
44.1kHz, 24-bit analog-to-digital conversion -
Auto Soft Limit for optimal input level - Powered by connection to iPad, iPhone or Mac
-
Made in the U.S.A.
In the box - JAM
- 0.5m cable for connection to iPad and iPhone
- 1m cable for connection to Mac
- Quick start guide
- Velcro strip
|
Musical ideas can come anytime and anywhere. So why not be ready for them when they arrive? iRig Keys MINI is an ultra-portable 25-key MIDI controller for iPhone, iPad, iPod touch, Android and Mac/PC. Its 25 velocity sensitive mini-keys provide a generous 2 octave range (plus 1 note), which makes it small enough to easily stash in your laptop or gig bag or backpack with room to spare. Now you have the keys to capture your creativity no matter where your mobile life takes you.
iRig Keys MINI is incredibly easy to use. It connects directly to your iOS device via the included Lightning connector, to your Android device via the included OTG to Micro-USB cable and to your Mac/PC via the included USB cable. It can also connect to older iOS devices via an optional 30-pin cable. And you'll be ready to go right out of the box: No additional apps, software or drivers are necessary to get up and running. Its plug-and-play thanks to its MIDI and USB class compliance — no additional apps, software or drivers are necessary to get up and running.
Features - 25 velocity-sensitive mini-keys (2 full octaves range plus 1 note)
- Volume/Data knob (assignable)
- Back-lit, soft-touch Octave Up/Down buttons
- Core MIDI and USB class compliant - plug and play
- Powered from iOS device or Mac/PC
- Comes with SampleTank FREE iOS and iGrand Piano FREE apps (download from the App store)
- Comes with iGrand Piano FREE and iLectric Piano FREE for Android (download from Google Play or Samsung Galaxy Apps)
- Comes with free Mac/PC software: SampleTank 3 SE (download from IK User Area)
- Comes with free Mac/PC virtual instrument collections for SampleTank 3: The Grid plus 5 collections from Beats and Elektronika series (choose and download from IK User Area), plus 25 free Gear Credits to use in the Custom Shop
- Includes Lightning, OTG to Micro-USB and USB cables (optional 30-pin cable can be used for older iOS devices)
|
Features
Using the YDS-12, you can:
Enjoy iPod audio, images and video as well as use the On-Screen Display to operate the iPod (Images, video and On-Screen Display not available on all products that use YDS-12. View the Specifications of each product for playback compatibility.)
Operate the iPod via the receiverʼs remote control
Charge the iPod
YDS-12BL Advantages
Watch movies and play images
Easy connection using a single cable
No need for an additional adapter
Looks great and matches Yamaha AV Receiver finish
Modes switch (A, B). Default is (A) mode for compatibility with the newer Yamaha products such as the RX-Vx67 series, AVENTAGE series and YSP-2200 Digital Sound Projector, while (B) mode is for compatibility with previous Yamaha products that use the dock port [iPhone is not supported in mode (B)].
Made for
iPhone 4, iPhone 3GS, iPhone 3G, iPhone
iPod touch (1st, 2nd and 3rd generation)
iPod classic, iPod with video, iPod with color display, iPod mini
iPod nano (1st, 2nd, 3rd, 4th and 5th generation)
|
Reviews
There are no reviews yet.