NEUTRIK NPPA-TT-SD25 PATCH PANEL 25POL D-SUB CONN Patchbay

Easy Patch` Patch Panel, 2 x 48 TT (Bantam) jacks, half normalled,

2 x 48 TT (Bantam) jacks, half normalled bottom row, 288 push terminals, individual grounding

All NPPA patch panels are fitted with high quality, long life NJ3TTA gold plated double contact jacks (2x48), featuring best contact integrity. The unit, robustly housed in a black coated steel shell, is finished off with a built in cable bar and two large channel identification strips for perfect management of the system. The NPPA patch panels are an innovative and compact patching system (just 1U high) for 19" rack mounting.

• Innovative and compact patching system (just 1U high) for 19" rack mounting
• Robustly housed in a black coated steel shell
• High quality long life gold plated Neutrik prewired double jacks with best contact integrity
• Qualified for analog and digital signals acc. AES3, 48 kHz sampling frequency
• Mixed normalling configuration can be done by jack pairs (see accessories)
• Flexible grounding system (see Assembly Instruction)

Easy Patch` Patch Panel, 2 x 48 TT (Bantam) jacks, half normalled (jumpers) - fast and easy wiring and change of normalling, 288 Krone-type IDC terminals, including top and bottom cover

Design Criteria
All panels are fitted with high quality, long life NJ3TTA gold plated double contact jacks (2x48), featuring drastically improved contact integrity. The unit is finished off with a built in cable bar and two large channel ident strips for perfect management of the system. The new generation of the Neutrik "Easy-Patch" is easily programmable for any one of five configurations (standard is half normalled bottom row) and for the grounding system of your choice. Each individual pair of jacks can be changed or reconfigured quickly and without fuss even while the panel is "on air“. The NJ3TTA jacks offer also two contact points per terminal (TRS) with a special designed mechanism for the normalling contact. Simply remove the front panel to reveal the easy access jack. Remove, replace or reconfigure the jack and refix the panel. The "Easy-Patch" is an innovative and compact patching system (just 1U high) for 19" rack mounting. Robustly housed in a black coated steel shell and featuring precision aluminium fittings it is built to last.

Grounding
The flexible grounding system provides the following versions:
Individual: Each channel is individually grounded by its corresponding cable shield (default configuration).
Group: Selected channel grounds are connected via the ground bus on the PCB using solder bridges and track cuts to form a group that is connected to one common cable shield.
Central: All channel grounds (individual top and bottom row) are connected via the ground bus on the PCB using solder bridges and wired with only one cable shield.
Chassis-Common: The same as central grounding but with the addition of the common ground bus (top and / or bottom rows) connected to the patch panel chassis by means of jumpers.

Features & Benefits

• Innovative and compact patching system (just 1U high) for 19" rack mounting
• Robustly housed in a black coated steel shell
• High quality long life gold plated Neutrik prewired double jacks with drastically improved contact integrity
• Qualified for analog and digital signals acc. AES3, 48 kHz sampling frequency
• Convenient change of normalling with the aid of jumpers

Neutrik NPPA-TT-E56 Bantam Patchbay, 19“, programm able on the front“, high end connections, half normalled, 6x56 pin ELCO plugs, 1 unit

The Press Patch Box is a special kind of audio signal distributor intended for use at press conferences. It features separate inputs for microphone and line signals (from a mixing console output).

Also available as stereo version (PPB20S)

A high quality input amplifier with a transformer balanced input provides a wide dynamic range. A total of 20 transformer-balanced XLR/m outputs with separate paired driver circuits make it possible to connect up video cameras and other recording equipment.

The nominal output level is +4 dBu at 600 Ω. Channels 19 and 20 have TRS jack sockets for balanced/unbalanced signals and also phono sockets (-10 dBu nominal level).

Where more than 20 outputs are required, additional PPB 20s can be hooked up via a rear BUS IN/OUT socket. Signal monitoring is provided by a 10 LED strip displaying a range of -40 to +10 dB (0 dB in the display = 4 dBu output) and an adjustable headphones amplifier.

The PPB20 has an integral, shielded power supply unit. An extra DC input makes it possible to connect up a (backup) battery power source. A PW4 can provide the necessary backup power supply for two PPB20s.

Input:

• Transformer-balanced, 4 XLR/f sockets, with paired front/rear parallel connections for separate microphone/line signals.
• Nominal Input Impedances: Microphones 200 Ω, Line = 5 kΩ
• Max. input levels: microphones = 0 dBu, Line = +20 dBu
• Max. amplification: microphones = +66 dB, Line = +22 dB (constantly adjustable via switch and potentiometer).

Output:

• 20 XLR/m, 2x TRS jack, 2x phono, all transformer-balanced and floating with separate ground lift switches at rear
• Nominal output impedances: XLR = 300 Ω, jack and phono = 600 Ω
• Nominal output levels: XLR = +4 dBu/20 dBu max.; jack/phono = -10 dBu, + 6 dBu max
• Headphones output: Stereo jack socket, with mono tip + ring, Designed for use with 8 Ω - 200 Ω headphones (constantly adjustable level).
• 10 LED strips displaying a range of -40 to +10 dB.
• Bus input/output (mono jack)
• Power Supply: 230 VAC or ± 12 V to ± 18 VDC, 15 Watts.
• Housing: 19'', 3 U, approx. 200 mm deep.

• Features 2x24 Neutrik NJ6TB-V long frame 1/4" TRS jacks acc. to BPO 316 / MIL-P-641/3
• Very robust and compact galvanized metal housing
• Eye catching channel identification through colored snap-on coding tabs
• 6 easily programmable switching configurations by jumpers
• Qualified for analog and digital signals acc. AES3, 48 kHz sampling frequency
• With high quality long life gold plated Neutrik jacks

Patch Panel with 2 x 24 TB (BP0316/MIL-P-642/2) jacks, programmable, push terminals, wire cross section: 0,08 . 0,5 mm² (AWG 28-20), stripping length: 5-6 mm (0,236in).

Design Criteria

The TB Patch Panel is a very robust and compactly designed Patch Panel for 19" rack mount (19" x 1U) with galvanized metal housing, a built-in cable bar on the rear for securing wires. There is a rear extension bar (NPP-S) available as an option for some panel types. On the front side we have an attractive additional lettering facility for each channel pair with a marking strip and individual snap-on colour coding plates. The NPP is easily programmable for six switching configurations and for changing the flexible grounding system. The panel has the high quality long life gold plated Neutrik NJ6TB-V Jack for the BPO / MIL style plugs.

Grounding

The flexible grounding system allows four possibilities to fit your needs:

Individual: Each channel ground is separately connected with the corresponding cable shield (default configuration). Group: Some channel grounds are PCB connected by making soldering joints on the PCB and by cutting tracks respectively to form a group that is connected to one common cable shield.

Central: All channel grounds are PCB connected by making soldering joints and wired with only one cable shield. Chassis-Common: Same as central grounding with additional connection of the common ground to the Patch Panel chassis by means of a jumper.

Features & Benefits

• Features 2x24 Neutrik NJ6TB-V long frame 1/4" TRS jacks acc. to BPO 316 / MIL-P-641/3
• Very robust and compact galvanized metal housing
• Eye catching channel identification through colored snap-on coding tabs
• 6 easily programmable switching configurations by jumpers
• Qualified for analog and digital signals acc. AES3, 48 kHz sampling frequency
• With high quality long life gold plated Neutrik jacks