Content |
CDP-360 Dual-CD-player
Starter device with a variety of functions
The 2 x 10 second Anti-Shock buffer keeps the CD from jumping
All functions located in a well-structured operating field
Comfortable track-selection via Skip-buttons and +10-button
Large Play/Pause-button and Cue-button
Auto Cue-function: the player automatically jumps to where the
music starts
Back Cue-function: by pressing the Cue-button, the player returns
to the track-start or Cue-point
Ergonomic LCD-display of all operation modes
Display switchable from track remain time to track playback time
Visual warning from 15 seconds before track-end
Pitch-adjustment via Pitchfader is displayed
Pitch Bend-buttons for synchronizing the bass-beat of 2 signal-sources
Pitch-adjustment of ± 12 % via Pitchfader
Jog/Shuttle-wheel for quick track-selection and framewise search (1/75 sec)
Sequence-playback via Loop-button possible
Up to 20 tracks can be programmed
Single-mode for playing one track only
Open/Close-button locked in playback-mode
LED-display of all important functions
19“-dimensions
Ideal for the installation in side racks, e.g. for pause music
Power supply:115/230 V AC, 50/60 Hz ~
Power consumption:14 W
Type:Dual Compact Disc Player
Available disc:Standard CDs 8 and 12 cm
Quantisation:D/A-converter: 1 Bit
Sampler frequency:44.1 kHz
Program memory: Up to 20 songs
Pitch adjustment: ± 12 %
Display: Remaining track time and Track playback time
Distortion:0.02 %
S/N-ratio: 88 dB
Channel seperation:80 dB
Frequency range:20 - 20,000 Hz; ± 1 dB
Audio output:unbalanced via RCA
Output level:2 Vrms
Dimensions:482 x 90 x 255 mm
19“-dimensions
Weight: 4.5 kg
|
RECORDING / PLAYBACK GENERAL Recording Media CD-R, CD-RW Sampling Frequency / Quantization 44.1kHz / 48kHz, 16bit 44.1kHz / 48kHz / 88.2kHz / 96kHz, 24bit File System CD-DA (CD rec/repro) ISO9660 (CD-ROM, repro. only) UDF ver.1.02 (CD-ROM, rec/repro) File Format CD-DA, BWF-P S/N 100 dB (typical) Dynamic Rage 100 dB (typical) Reference Level -12dBFS / -20dBFS T.H.D. less than 0.01 % (typical) INPUTS/OUTPUTS Analog Input (L/R, balanced) Connector XLR-3-31 type x2 Input Impedance 10k ohm or more Standard Input Level +4dBu Maximum Input Level +24dBu Analog Input (L/R, unbalanced) Connector RCA pin jack x2 Input Impedance 10k ohm or more Standard Input Level -10dBV Maximum Input Level +10dBV Analog Output (L/R, balanced) Connector XLR-3-32 type x2 Loaded Impedance 10k ohm or more Standard Output Level +4dBu Maximum Output Level +24dBu Analog Output (L/R, unbalanced) Connector RCA pin jack x2 Output Impedance 10k ohm or more Standard Output Level -10dBV Maximum Output Level +10dBV Phones Connectors Ø6mm Stereo Phone Jack x1 Loaded Impedance 8ohm or higher Maximum Output Level 100mW (32ohm) Digital Input (balanced) Connector XLR-3-31 type x1 Input Format IEC60958 Part2 (S/P DIF)/IEC60958 Part3 (AES/EBU) Automatic detect Digital Output (balanced) Connector XLR-3-32 type x1 Output Format IEC60958 Part2 (S/P DIF)/IEC60958 Part3 (AES/EBU) Switchable USB (for USB Keyboard only) Connector USB series A receptacle x1 GPI (for fader start) Connector Ø6mm Phone Jack x1 Format Short : Start / Open : Stop PHYSICAL Power requirements AC 100V – 240V, 50/60 Hz Power consumption 14 W Weight (without package) 4.8 kg Max. dimensions 482 (W) x 93.5 (H) x 321 (D) mm
Weight: 3 lbs. 9 oz.
Operating temperature: +5°C to +35°C
Operating humidity: 25% to 85%, non condensing
Storage temperature: -20°C to +60°C
Storage humidity: 25% to 85%, non condensing
|
Features: - Interactive ?AQ-Touch? Touch Sensitive Jog Wheels
- Effects ? Echo, Filter, Brake, Flanger, Phase, Pan, Transform
- Real-Time Scratch Effect
- 10 Seconds of Anti-Shock Memory Per Deck
- Instant Start
- Seamless Loop
- Pitch Range Selectable ±4, 8, 16 & 100%
- Auto/Manual BPM (effects Linked)
- Reverse Play
- Master Tempo
- 3 Memory banks for Sampler & Cue
- Internal Intelligent Memory System (IMS)
- Relay Play Allows Consecutive Playback Between Two Decks
- Single/Continuous Play
- Selectable Elapsed, Remain and Total Time Display
- Auto Cue Function
- 6 Effect-Sync Parameter Sets
- Volume Balance Between Music & Sampler
- S/PDIF Digital Audio RCA Coaxial Output
Specifications: Power supply | 230Vac, 50Hz | Output level | 1Vrms (±1dB) | Frequency response | 20Hz - 20kHz (±0.5dB) | De-emphasis | 20Hz - 16kHz (±2.5dB) | THD | 0.01% | Channel separation | 83dB | Signal to noise ratio | 86dB | Pitch bend | 100% | Pitch slider | ±4, 8, 16, 100% | Pitch accuracy | 0.1% | Output:Digital | 0.5V (p-p) @ 75 ohms | Dimensions:Control unit | 482 x 177 x 65.5mm (4U) | Dimensions:Main unit | 482 x 88.8 x 262mm (2U) | Weight | 8.6kg | |
For models
CD-GΤ2
CD-ΒΤ2
CD-VΤ2
DR-1
DR-07
DR-100
|
Introducing the Denon DN-C640, a fully specified Network Audio/CD player for use in all broadcast, installation and professional audio environments. The DN-C640 is a 1U rack-mount unit featuring a slot-load CD/DVD drive, able to read CDA, MP3, WMA, MP2 and PCM .wav files from CD or DVD media. It is also equipped with an inbuilt LAN port offering complete access to network audio files and remote control via a web based GUI.
With balanced, unbalanced, SP-DIF and AES outputs, an RS 232 port, an IR receiver and a parallel remote port, the DN-C640 fits into any and all pro audio environments requiring the playing of CD and the versatility of network audio selection, locally or remotely. Additionally the use of DVD media and compressed audio files can result in days of playback accommodating the most demanding of users.
The product is completed with a high visibility, fully featured fluorescent display and large backlit transport controls.
- Supports CD-DA (.cda), WAVE (.wav), MPEG-1/2 Layer III (.mp3), MPEG-1
- Layer II (.mpg), Windows Media Audio (.wma)
- End Monitor and User-selectable Finish Mode Features
- Cue to Music (with dedicated button)
- Reads CD-R/RW, DVD-R/RW, and DVD+R/RW discs
|
Reviews
There are no reviews yet.