OMNITRONIC CDP-360 DUAL CD-PLAYER

CDP-360 Dual-CD-player

Starter device with a variety of functions
The 2 x 10 second Anti-Shock buffer keeps the CD from jumping
All functions located in a well-structured operating field
Comfortable track-selection via Skip-buttons and +10-button
Large Play/Pause-button and Cue-button
Auto Cue-function: the player automatically jumps to where the
  music starts
Back Cue-function: by pressing the Cue-button, the player returns
  to the track-start or Cue-point
Ergonomic LCD-display of all operation modes
Display switchable from track remain time to track playback time
Visual warning from 15 seconds before track-end
Pitch-adjustment via Pitchfader is displayed
Pitch Bend-buttons for synchronizing the bass-beat of 2 signal-sources
Pitch-adjustment of ± 12 % via Pitchfader
Jog/Shuttle-wheel for quick track-selection and framewise search (1/75 sec)
Sequence-playback via Loop-button possible
Up to 20 tracks can be programmed
Single-mode for playing one track only
Open/Close-button locked in playback-mode
LED-display of all important functions
19“-dimensions
Ideal for the installation in side racks, e.g. for pause music

Power supply:115/230 V AC, 50/60 Hz ~
Power consumption:14 W
Type:Dual Compact Disc Player
Available disc:Standard CDs 8 and 12 cm
Quantisation:D/A-converter: 1 Bit
Sampler frequency:44.1 kHz
Program memory: Up to 20 songs
Pitch adjustment: ± 12 %
Display: Remaining track time and Track playback time
Distortion:0.02 %
S/N-ratio: 88 dB
Channel seperation:80 dB
Frequency range:20 - 20,000 Hz; ± 1 dB
Audio output:unbalanced via RCA
Output level:2 Vrms
Dimensions:482 x 90 x 255 mm
                  19“-dimensions
Weight: 4.5 kg

• 19" rackmount single CD/MP3 player with easy-to-use digital record function
• Plays MP3, CD, CD-R and CD-RW discs
• Bright LCD display shows track name when a MP3 disc is played
• Includes infrared remote control with volume control and other features
• 2 USB music inputs (1 on front, 1 on rear) for external music sources (hard drive, MP3 players, thumb drives)
• XLR balanced outputs on rear (send audio signal directly to powered speakers)
• RCA outputs
• USB record to MP3 format (128 kbps)
• Seamless loop
• Auto and manual BPM counter
• +10 track advance button
• Mechanical anti-skip protection
• Quick MP3/CD recognition
• Pitch (CD Source): Hyper Pitch (+/-4%, +/-8%, +/-16%, +/-100%)
• Pitch (MP3 Source): (+/-4%, +/-8%, +/-16%)
• Tempo lock
• Single/Continue mode and Time Remaining/Time Gone-By viewing
• Frame search
• Jog wheel controller
• Record to MP3
• Includes American Audio Database Builder Program (PC only)

• Volume control
• Folder search
• Track search
• Mute
• Key lock
• Play, Pause, Stop buttons
• Seamless loop control
• Source selection
• Eject button
• Record button

RECORDING / PLAYBACK
GENERAL
Recording Media CD-R, CD-RW
Sampling Frequency / Quantization 44.1kHz / 48kHz, 16bit
44.1kHz / 48kHz / 88.2kHz / 96kHz, 24bit
File System CD-DA (CD rec/repro)
ISO9660 (CD-ROM, repro. only)
UDF ver.1.02 (CD-ROM, rec/repro)
File Format CD-DA, BWF-P
S/N 100 dB (typical)
Dynamic Rage 100 dB (typical)
Reference Level -12dBFS / -20dBFS
T.H.D. less than 0.01 % (typical)
INPUTS/OUTPUTS
Analog Input (L/R, balanced)
Connector XLR-3-31 type x2
Input Impedance 10k ohm or more
Standard Input Level +4dBu
Maximum Input Level +24dBu
Analog Input (L/R, unbalanced)
Connector RCA pin jack x2
Input Impedance 10k ohm or more
Standard Input Level -10dBV
Maximum Input Level +10dBV
Analog Output (L/R, balanced)
Connector XLR-3-32 type x2
Loaded Impedance 10k ohm or more
Standard Output Level +4dBu
Maximum Output Level +24dBu
Analog Output (L/R, unbalanced)
Connector RCA pin jack x2
Output Impedance 10k ohm or more
Standard Output Level -10dBV
Maximum Output Level +10dBV
Phones
Connectors Ø6mm Stereo Phone Jack x1
Loaded Impedance 8ohm or higher
Maximum Output Level 100mW (32ohm)
Digital Input (balanced)
Connector XLR-3-31 type x1
Input Format IEC60958 Part2 (S/P DIF)/IEC60958 Part3 (AES/EBU)
Automatic detect
Digital Output (balanced)
Connector XLR-3-32 type x1
Output Format IEC60958 Part2 (S/P DIF)/IEC60958 Part3 (AES/EBU)
Switchable
USB (for USB Keyboard only)
Connector USB series A receptacle x1
GPI (for fader start)
Connector Ø6mm Phone Jack x1
Format Short : Start / Open : Stop
PHYSICAL
Power requirements AC 100V – 240V, 50/60 Hz
Power consumption 14 W
Weight (without package) 4.8 kg
Max. dimensions 482 (W) x 93.5 (H) x 321 (D) mm

Integrated
    Yes
Transport
    No
DAC
    No
Multidisc
    No
Coaxial digital out
    1
Optical digital out
    1
XLR out
    1
RCA out
    1
Headphone
    0
Coaxial digital in
    0
Optical digital in
    0
XLR in
    0
RCA in
    0
CD Text
    No
Memory
    Yes
Display off
    Yes
Finishes
    2
Dimensions (hwd, cm)
    14x44x44
PublishTo
    B