Content | The Pro S entry-level cartridge is perfect for newcomers on the DJ scene who want to start off with decent, but not too expensive equipment.
The Pro S has a spherical diamond stylus which minimizes scratching and a solid cantilever which can survive hectic activity at the turntable.
No matter what the application, the Pro S provides remarkable versatility for virtually any setting.
The sound quality is absolutely not to worry about.
The Pro S is a consistent performer and a fine all-arounder!
Pro S Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 5 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 20 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-18.000 Hz
Frequency response - 20-18.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force - 70 μm
Compliance, dynamic lateral - 7 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 3,0-5,0 g (30-50 mN)
Tracking force recommended - 4,0 g (40 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Concorde / OM cartridge weight - 18,5 g / 5,0 g
Compatible with cartridges - Concorde Pro S and OM Pro S |
Stylus 5 Spherical
Technical data |
|
Frequency range |
20-20.000 Hz |
Frequency response |
20-15.000 Hz ± 2 dB
|
Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
Compliance, dynamic, lateral |
15 µm/mN |
Stylus type |
spherical |
Stylus tip radius |
R/18 µm |
Equivalent stylus tip mass |
0,5 mg |
Tracking force range |
1,75-2,25 g (17,5-22,5 mN)
|
Tracking force, recommended |
2 g (20 mN)
|
Tracking angle |
20° |
Stylus colour |
Black |
|
OM 5,OMB 5, LMA 5, SMB 5 |
*) Typical value |
This replacement stylus is designed for playback on coded vinyl. It has a superior tracking ability and causes low record wear. It is a spherical stylus with an output of 8.0 mV. | Replacement stylus for the CC-1 Cartridge.
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 28dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: high versatility and skip resistance |
Ortofon 540MKII Stylus Technical Data
Frequency range 20-27.000 Hz
Frequency response 20-20.000 Hz + 2 / - 3 dB
Tracking ability at 315Hz at recommended tracking force 90 µm
Compliance, dynamic, lateral 30 µm/mN
Stylus type Nude FG 70
Stylus tip radius r/R 5/70 µm
Equivalent stylus tip mass 0,3 mg
Tracking force range 1,25-1,75 g (12,5-17,5 mN)
Tracking force, recommended 1,5 g (15 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges Series 540 Mkll, 540, 540 P |
|
Stylus 10
Genuine Original Stylus for OM 10, OM 10 Super, OMP10, LM 10, Concorde 10, TM 10H
Elliptical
Interchangeability/Upgrade Group: A
|
Reviews
There are no reviews yet.