Content |
Add some serious style to your deck with these sleek, metallic headshells from Ortofon. The SH-4 is a much better look than your standard black plastic headshell plus features a big finger lift, short head to make it easier to watch and place your stylus on the groove, and gold plated wire terminals for a better signal. Mounting screws included. Offering the type of premium quality DJs have long come to expect from ORTOFON, the SH-4 model headshell delivers superior performance and durability and is compatible with all DJ turntables and DJ cartridges on the market.
ORTOFON SH-4 HEADSHELL SPECIFICATIONS:
- ALL METAL CONSTRUCTION
- GOLD PLATED TERMINALS
- INCLUDES MOUNTING SCREWS
- WORKS WITH ANY CARTRIDGE (PERFECT FOR ORTOFON OM SERIES)
- MADE IN JAPAN
|
10g headshell magnesium body
- Threaded headshell avoiding in use of nuts when fitting cartridge
- 7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
- Includes gold plated terminals quad wire
|
Pick your colour
Designed for the PLX-1000 and PLX-500, the PC-HS01 headshell comes in black, silver and gold so you can choose the colour that complements your set-up best. Or use the colours to differentiate between your weight, cartridge and stylus preferences; for example, black for scratching, silver for recording, and gold for listening.
The PC-HS01 comes with a 4 gram shell weight, but the headshell also allows you to attach different weights (cartridge and stylus are not included).
Specifications
|
- PC-HS01 includes:
- 2 screws
- 2 washers
- 2 nuts
- 4 gram shell weight
- Product weight: 10 g (11 g, including the supplied accessories)
- Shell length: 52 mm
- Finger length: 21 mm
|
|
Technical data
Output voltage at 1000 Hz, 5cm/sec. 0.2 mV
Channel balance at 1 kHz
Channel separation at 1 kHz > 20 dB
Channel separation at 15 kHz > 10 dB
Frequency range at - 3dB 20-25.000 Hz
Frequency response 20-20.000 Hz ± 3 dB
Tracking ability at 315Hz at recommended tracking force *) 65 µm
Compliance, dynamic, lateral 8 µm/mN
Stylus type Nude spherical
Stylus tip radius R 18 µm
Tracking force range 3.0-5.0 g (30-50 mN)
Tracking force, recommended 4.0 g (40 mN)
Tracking angle 20°
Internal impedance, DC resistance 6 Ohm
Recommended load impedance > 10 Ohm
Coilwire material High Purity Copper (OFC)
Cartridge colour Black
Cartridge weight 13 g |
The SPU Classic N E provides the same sound reproduction properties as the SPU Classic GM E series, but is sold without the integrated headshell unit.
The SPU Classic N E is a Moving Coil (MC) cartridge with an elliptical stylus profile and provides more detailed sound reproduction and expansive imaging.
Technical data
Output voltage at 1000 Hz, 5cm/sec. 0.2 mV
Channel balance at 1 kHz
Channel separation at 1 kHz > 20 dB
Channel separation at 15 kHz > 10 dB
Frequency range at - 3dB 20-25.000 Hz
Frequency response 20-20.000 Hz + 3 / - 2 dB
Tracking ability at 315Hz at recommended tracking force *) 65 µm
Compliance, dynamic, lateral 8 µm/mN
Stylus type Nude elliptical
Stylus tip radius r/R 8/18 µm
Tracking force range 3.0-5.0 g (30-50 mN)
Tracking force, recommended 4.0 g (40 mN)
Tracking angle 20°
Internal impedance, DC resistance 6 Ohm
Recommended load impedance > 10 Ohm
Coilwire material High Purity Copper (OFC)
Cartridge colour Black
Cartridge weight 13 g
|
15g TechniHard™ adjustable headshell with AT6101 quad wire
- Adjustable overhang and adjustable azimuth (tilt)
- Threaded headshell avoiding in use of nuts when fitting cartridge
- 7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
- 1 hexagon wrench (for overhanging and tilt adjustment)
|
Reviews
There are no reviews yet.