ORTOFON DJ S STYLUS

48.99 incl. GR VAT

In stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: STYLUS DJ S Category:
DJ S Replacement stylus DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity. Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the […]

 

Read more

DJ S Replacement stylus

DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity.

Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the “jack of all trades,” with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.

The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world!

DJ S Stylus Technical data

Output voltage at 1000Hz, 5cm/sec.  – 6 mV
Channel balance at 1kHz  – 2 dB
Channel separation at 1kHz  – 23 dB
Channel separation at 15 kHz  – 15 dB
Frequency range at -3dB  – 20-20.000 Hz
Frequency response  – 20-18.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force  – 80 μm
Compliance, dynamic lateral –  9 μm/m N
Stylus type  – Spherical
Stylus tip radius  –  R 18 μm

Tracking force range  – 2,0-4,0 g (20-40 mN)
Tracking force recommended –  3,0 g (30 mN)
Tracking angle –  20°
Internal impedance, DC resistance –  750 Ohm
Internal inductance  – 450 mH
Recommended load resistance  – 47 kOhm
Recommended load capacitance  – 200-600 pF
Cartridge weight  – 18,5 g

Compatible with cartridges –  DJ S

Weight 0.30 kg

Reviews

There are no reviews yet.

Be the first to review “ORTOFON DJ S STYLUS”

Your email address will not be published. Required fields are marked *

Quick Comparison

ORTOFON DJ S STYLUS removeORTOFON STYLUS 20 removeORTOFON STYLUS DIGITRACK removeORTOFON STYLUS 530MKII removeORTOFON STYLUS DJ E Needle removeORTOFON STYLUS 14 remove
NameORTOFON DJ S STYLUS removeORTOFON STYLUS 20 removeORTOFON STYLUS DIGITRACK removeORTOFON STYLUS 530MKII removeORTOFON STYLUS DJ E Needle removeORTOFON STYLUS 14 remove
Image
SKUSTYLUS DJ SSTYLUS20STYLUSDIGITRACK530MKIISTYLUS DJ ESTYLUS14
Rating
Price48.99 incl. GR VAT169.00 incl. GR VAT43.00 incl. GR VAT249.00 incl. GR VAT 50.84 incl. GR VAT57.00 incl. GR VAT
Stock

In stock (can be backordered)

In stock

In stock

In stock

In stock (can be backordered)

In stock

AvailabilityIn stock (can be backordered)In stockIn stockIn stockIn stock (can be backordered)In stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentDJ S Replacement stylus DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity. Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied. The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world! DJ S Stylus Technical data Output voltage at 1000Hz, 5cm/sec.  - 6 mV Channel balance at 1kHz  - 2 dB Channel separation at 1kHz  - 23 dB Channel separation at 15 kHz  - 15 dB Frequency range at -3dB  - 20-20.000 Hz Frequency response  - 20-18.000 Hz 3dB/-2dB Tracking ability at 315 Hz at recommmende tracking force  - 80 μm Compliance, dynamic lateral -  9 μm/m N Stylus type  - Spherical Stylus tip radius  -  R 18 μm Tracking force range  - 2,0-4,0 g (20-40 mN) Tracking force recommended -  3,0 g (30 mN) Tracking angle -  20° Internal impedance, DC resistance -  750 Ohm Internal inductance  - 450 mH Recommended load resistance  - 47 kOhm Recommended load capacitance  - 200-600 pF Cartridge weight  - 18,5 g Compatible with cartridges -  DJ S

Genuine Original Stylus for OM 20, OM 20 Super, OMP20, LM 20, Concorde 20, TM 20
Nude Elliptical

This replacement stylus is designed for playback on coded vinyl. It has a superior tracking ability and causes low record wear. It is a spherical stylus with an output of 8.0 mV.

Ortofon 530MKII Stylus Technical Data

  • Frequency range 20-25.000 Hz
  • Frequency response 20-20.000 Hz + 2 / - 3 dB
  • Tracking ability at 315Hz at recommended tracking force 80 µm
  • Compliance, dynamic, lateral 30 µm/mN
  • Stylus type Nude Fine Line
  • Stylus tip radius r/R 8/40 µm
  • Equivalent stylus tip mass 0,3 mg
  • Tracking force range 1,25-1,75 g (12,5-17,5 mN)
  • Tracking force, recommended 1,75 g (17,5 mN)
  • Tracking angle 20°
  • Stylus colour Black
  • Recommended for following cartridges Series 530 Mkll, 530, 530 P
  • DJ E Replacement stylus

    Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever

    Features Special Elliptical stylus and a special developed and extremely balanced cantilever.

    Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.  

    The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied. 

    DJ E Stylus Technical data

    Output voltage at 1000Hz, 5cm/sec. -   6 mV
    Channel balance at 1kHz  -  2 dB
    Channel separation at 1kHz  -  23 dB
    Channel separation at 15 kHz  -  15 dB
    Frequency range at -3dB  -  20-22.000 Hz
    Frequency response -   20-20.000 Hz +/-2 dB
    Tracking ability at 315 Hz at recommmende tracking force  -  80 μm
    Compliance, dynamic lateral  -  9 μm/m N
    Stylus type  -  Special Elliptical
    Stylus tip radius  -  r/R 13/25 μm

    Tracking force range  -  2,0-4,0 g (20-40 mN)
    Tracking force recommended  -  3,0 g (30 mN)
    Tracking angle -   20°
    Internal impedance, DC resistance  -  750 Ohm
    Internal inductance  -  450 mH
    Recommended load resistance   - 47 kOhm
    Recommended load capacitance -  200-600 pF
    Cartridge weight  -  18,5 g

    Compatible with cartridges -  DJ S

    Ortofon 14 Stylus Technical Data

  • Frequency range 20-22.000 Hz
  • Frequency response 20-20.000 Hz + 2 / - 2 dB
  • Tracking ability at 315Hz at recommended tracking force *) 70 µm
  • Compliance, dynamic, lateral 25 µm/mN
  • Stylus type Elliptical
  • Stylus tip radius r/R 8/18 µm
  • Equivalent stylus tip mass 0,5 mg
  • Tracking force range 1,0-1,5 g (10-15 mN)
  • Tracking force, recommended 1,25 g (12,5 mN)
  • Tracking angle 20°
  • Stylus colour Black
  • Recommended for following cartridges TM 14U
  • Weight0.30 kg0.20 kg0.20 kg0.20 kg0.30 kg0.20 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.30 kg
    Weight 0.20 kg
    Weight 0.20 kg
    Weight 0.20 kg
    Weight 0.30 kg
    Weight 0.20 kg