| Content |
DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
Features Special Elliptical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force recommended - 3,0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 18,5 g
Compatible with cartridges - DJ S
|
The Ortofon Arkiv stylus Boasts clear and accurate sound reproduction and remarkable stereo imaging, making it perfectly suited for sampling, transcription, and numerous other professional applications.
Replacement stylus to be used in Ortofon Arkiv OM and Concorde cartridges. Growing demand for the ability to transcribe vinyl to digital formats has prompted the creation of Ortofon Arkiv cartridge - a cartridge specially designed to provide optimized sound quality specifically for recording purposes. The Ortofon Arkiv cartridge boasts clear and accurate sound reproduction and remarkable stereo imaging, making it perfectly suited for sampling, transcription, and numerous other professional applications.
Ortofon Arkiv Cartridge Specifications:
Frequency response: 20 to 20.000 Hz
Output: 6mV
Channel separation nominal: 23dB
Inductance: 450mH/ch
Weight: 5g
Tracking force: 3 grams
Recommended load: 47K ohms 200pf
Stylus tip: Special elliptical |
| Technical data |
|
| Frequency range |
20-29.000 Hz |
| Frequency response |
20-20.000 Hz + 2 / -0 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
80 µm |
| Compliance, dynamic, lateral |
22 µm/mN |
| Stylus type |
Nude Fine Line |
| Stylus tip radius |
r/R 8/40 µm |
| Tracking force range |
1,4-1,7 g (14-17 mN) |
| Tracking force, recommended |
1,5 g (15,0 mN) |
| Tracking angle |
20° |
| Stylus colour |
Bronze |
|
|
| Recommended for following cartridges |
2M BRONZE |
|
Genuine Original Stylus for OM 20, OM 20 Super, OMP20, LM 20, Concorde 20, TM 20
Nude Elliptical
|
Stylus 5 Spherical
| Technical data |
|
| Frequency range |
20-20.000 Hz |
| Frequency response |
20-15.000 Hz ± 2 dB
|
| Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
| Compliance, dynamic, lateral |
15 µm/mN |
| Stylus type |
spherical |
| Stylus tip radius |
R/18 µm |
| Equivalent stylus tip mass |
0,5 mg |
| Tracking force range |
1,75-2,25 g (17,5-22,5 mN)
|
| Tracking force, recommended |
2 g (20 mN)
|
| Tracking angle |
20° |
| Stylus colour |
Black |
|
OM 5,OMB 5, LMA 5, SMB 5 |
*) Typical value | Ortofon 520MKII Stylus Technical Data
- Frequency range 20-23.000 Hz
- Frequency response 20-20.000 Hz + 2 / - 3 dB
- Tracking ability at 315Hz at recommended tracking force 70 µm
- Compliance, dynamic, lateral 25 µm/mN
- Stylus type Nude Elliptical
- Stylus tip radius r/R 8/18 µm
- Equivalent stylus tip mass 0,3 mg
- Tracking force range 1,25-1,75 g (12,5-17,5 mN)
- Tracking force, recommended 1,5 g (15 mN)
- Tracking angle 20°
- Stylus colour Black
- Recommended for following cartridges Series 520 Mkll, 520, 520 P
|
|
Reviews
There are no reviews yet.