Content |
maximizes bass response, and can also
eliminate certain frequencies that stand
out due to the roomʼs natural
resonances. These are commonly called
"standing waves.” To "tune” the sub to
the room, simply play music through
your sub and try different placements
within the corner, until no frequency
"jumps out” at you, and the bass sounds
full through the subʼs frequency range
and throughout the room.
DESCRIPTION
The Peavey DJS™ Sub is a newly
designed folded bass-horn speaker
system comprising the Peavey 1808-8cu
Black Widow® driver.
The DJS Sub is constructed of
medium density fibreboard (MDF), which
is a void-free, warp-free, and highly
durable material. The DJS Sub cabinet is
finished with Peaveyʼs durable black
carpet. Metal corners are also added to
provide further protection to the cabinet.
FEATURES
• Compact folded bass-horn design
• One 1808-8cu Black Widow woofer
• Internal crossover with 8 Ohm highpass
output
• Direct input jack
• Built-in casters for easy transport
PLACEMENT
Low frequency energy is
omnidirectional which means it travels
out in all directions from its source.
Because of this you can greatly affect
the perceived volume of your low
frequency drivers by placing them
correctly within the room.
When we put a sub on the floor it is
said we have coupled with a boundary
(Fig. 1); if we place it against the wall
and the floor, it is said that we have
coupled with two boundaries (Fig. 2).
By placing the sub in the corner and
coupling with three boundaries (see
figure 3), the bass can be greatly
augmented.
Since the length of the low frequency
sound waves can be as long or longer
than the room, proper sub placement
SPECIFICATIONS
Frequency response:
40 Hz to 150 Hz with crossover
40 Hz to 1,500 Hz without crossover
Usable low frequency limit
(-10 dB point):
35 Hz
Power handling:
Passive Internal Crossover:
500 W continuous (63.2 V RMS)
1,000 W program
2,000 W peak
Direct Connection:
500 W continuous (63.2 V RMS)
1,000 W program
2,000 W peak
Sound pressure level, 1 Watt, 1 meter:
103.0 dB SPL, (2.83 V input)
Maximum sound pressure level
(1 meter):
126.0 dB SPL continuous
132.0 dB SPL peak
Transducer complement:
1x 18 in. woofer, vented
1808-8cu Black Widow
X-over frequency:
150 Hz
Impedance (Z):
Nominal: 8.0 Ohms
Minimum: 5.9 Ohms
Input connections:
1x 1/4" input jack, 1x 1/4" high-pass
output jack, and 1x Neutrik® Speakon™
automatically switching direct biamp
jack
Dimensions (H x W x D):
Front:
35 in. x 24 in. x 28.25 in.
Net Weight:
172 lbs. (78.2 kg) |
A range of compact 2-way stereo speakers, with ABS enclosures and a sturdy metal grille. Suitable for free standing or wall mounting via adjustable fixing bracket. The trapezoidal design allows for the enclosures to be mounted neatly into corners, making them ideal for Hi-Fi and surround sound applications.
2-way speakers Complete with mounting brackets Supplied in pairs Available in Black and White Optional mounting by M6 screw sockets Note: Connecting leads not supplied
Colour White Woofer 75mm Tweeter 25mm (1“) balanced dome tweeter Frequency response 120Hz - 20kHz Power rms 30W Power max. 60W Sensitivity 88dB Impedance 8 ohm Dimensions (each) 106 x 153 x 106mm Weight 840g Weight per set 1.7kg
|
A range of compact 2-way stereo speakers, with ABS enclosures and a sturdy metal grille. Suitable for free standing or wall mounting via adjustable fixing bracket. The trapezoidal design allows for...
- 2-way speakers
- Complete with mounting brackets
- Supplied in pairs
|
3.5" Dual SR-Bass subwoofer for high and low impedance systems
Although no larger than a compact surface-mount speaker the VXS3S delivers solid, natural-sounding low-end reinforcemen
- Sound and size ideally matched to the VXS1ML
- SR-Bass™ technology delivers solid bass in a compact unit
- Satellite connectors for easy setup
- Dedicated wall/ceiling mount hardware supplied
- Black and white models available
- Paintable enclosures and grilles
- Recommended satellite speakers: VXS1ML
Frequency responce 65Hz-180ΚHz, power 20W noise / 40W program @8ohms, 15W@100V, 98dB max SPL, dimensions 322x162x118mm, weight 2.7 Kg.
| MQ 90S is a compact band-pass 8” subwoofer.
It can be connected through a removable Euroblock plug that allows the parallel connection of other loudspeakers.
The cabinet material is MDF with a scratch resistant surface.
The subwoofer has internally a transformer for constant voltage lines (100 or 70 V).
The power selection is made by means of its selector.
It is for indoor use only (avoid to use it in very humid places).
It should be put on the floor of a room where "satellite” loudspeakers (for mid / high frequencies) are already present. MQ 90S belongs to RCF Monitor Q series.
Acoustical Specifications |
Type Of Speaker: |
“band-pass" subwoofer |
|
Frequency Response: |
70 Hz |
÷ 220 kHz |
Max SPL @ 1m: |
107 dB |
|
Power Handling: |
60 Watt RMS |
|
Peak Power Handling: |
120 Watt PEAK |
|
System Sensitivity: |
89 dB |
|
Impedance: |
16 Ω |
|
Crossover frequencies: |
200 Hz |
|
INPUT SECTION |
Input connector: |
Removable 4 pole Euroblock |
|
Constant voltage: |
100 V, 70 V V |
|
Power Selection: |
60 - 30 - 15 - 7.5 W (100 V) |
|
CABINET |
Hardware: |
Material PVC |
|
Colour: |
White / Black |
|
PHYSICAL SPECIFICATIONS |
Height: |
300 / 11.81 |
|
Width: |
203 / 7.99 |
|
Depth: |
400 / 15.74 |
|
Net Weight: |
8.06 / 17.76 |
|
SHIPPING INFORMATION |
Package height: |
370 / 14.56 |
|
Package width: |
265 / 10.43 |
|
Package depth: |
470 / 18.50 |
|
Shipping Weight: |
9.24 / 20.59 |
|
Παθητικό ηχείο Subwoofer με LF woofer 3.5in για χρήση κυρίως σε συνδυασμό με δορυφόρους VXS1ML. Παρέχει εξόδους για σύνδεση 2-4 δορυφόρων. Απόκριση συχνότητας 65Hz-180ΚHz, ισχύς 20W noise / 40W program @8ohms, 15W@100V, 98dB max SPL, διαστάσεις 322x162x118mm, βάρος 2.7 Kg. Διαθέτει βάση με δυνατότητα τοποθέτησης σε τοίχο ή οροφή. Χρώμα λευκό. |
Reviews
There are no reviews yet.