| Content |
maximizes bass response, and can also
eliminate certain frequencies that stand
out due to the roomʼs natural
resonances. These are commonly called
"standing waves.” To "tune” the sub to
the room, simply play music through
your sub and try different placements
within the corner, until no frequency
"jumps out” at you, and the bass sounds
full through the subʼs frequency range
and throughout the room.
DESCRIPTION
The Peavey DJS™ Sub is a newly
designed folded bass-horn speaker
system comprising the Peavey 1808-8cu
Black Widow® driver.
The DJS Sub is constructed of
medium density fibreboard (MDF), which
is a void-free, warp-free, and highly
durable material. The DJS Sub cabinet is
finished with Peaveyʼs durable black
carpet. Metal corners are also added to
provide further protection to the cabinet.
FEATURES
• Compact folded bass-horn design
• One 1808-8cu Black Widow woofer
• Internal crossover with 8 Ohm highpass
output
• Direct input jack
• Built-in casters for easy transport
PLACEMENT
Low frequency energy is
omnidirectional which means it travels
out in all directions from its source.
Because of this you can greatly affect
the perceived volume of your low
frequency drivers by placing them
correctly within the room.
When we put a sub on the floor it is
said we have coupled with a boundary
(Fig. 1); if we place it against the wall
and the floor, it is said that we have
coupled with two boundaries (Fig. 2).
By placing the sub in the corner and
coupling with three boundaries (see
figure 3), the bass can be greatly
augmented.
Since the length of the low frequency
sound waves can be as long or longer
than the room, proper sub placement
SPECIFICATIONS
Frequency response:
40 Hz to 150 Hz with crossover
40 Hz to 1,500 Hz without crossover
Usable low frequency limit
(-10 dB point):
35 Hz
Power handling:
Passive Internal Crossover:
500 W continuous (63.2 V RMS)
1,000 W program
2,000 W peak
Direct Connection:
500 W continuous (63.2 V RMS)
1,000 W program
2,000 W peak
Sound pressure level, 1 Watt, 1 meter:
103.0 dB SPL, (2.83 V input)
Maximum sound pressure level
(1 meter):
126.0 dB SPL continuous
132.0 dB SPL peak
Transducer complement:
1x 18 in. woofer, vented
1808-8cu Black Widow
X-over frequency:
150 Hz
Impedance (Z):
Nominal: 8.0 Ohms
Minimum: 5.9 Ohms
Input connections:
1x 1/4" input jack, 1x 1/4" high-pass
output jack, and 1x Neutrik® Speakon™
automatically switching direct biamp
jack
Dimensions (H x W x D):
Front:
35 in. x 24 in. x 28.25 in.
Net Weight:
172 lbs. (78.2 kg) | The SUBLIME is an ultra compact passive 6.5' dual coil subwoofer that offers the ultimate blend of a compact size and deep, fat basses. Thanks to the built-in X-over, this subwoofer is the ideal partner for the MASK2 top speakers.
This thinnest subwoofer on the market (only 12 cm deep) allows for easy integration into any interior: on the wall (mounted with the included wall mounting brackets), behind curtains or even under furniture.Speaker and connection terminals are invisible when mounted on the wall using the included mounting brackets. It may look like a small heating radiator, but instead of heat, it will radiate musical vibes in your room.
The SUBLIME subwoofer has a built-in stereo X-over filter, thus eliminating the need for external filters. The X-over filter separates the high frequencies and sends them directly to the top speakers. Optionally, you can use the SUBLIME speaker in an active speaker setup, using an active filter and separate power amplifier. You can use the SUBLIME up to 200 Hz. |
3.5" Dual SR-Bass subwoofer for high and low impedance systems
Although no larger than a compact surface-mount speaker the VXS3S delivers solid, natural-sounding low-end reinforcemen
- Sound and size ideally matched to the VXS1ML
- SR-Bass™ technology delivers solid bass in a compact unit
- Satellite connectors for easy setup
- Dedicated wall/ceiling mount hardware supplied
- Black and white models available
- Paintable enclosures and grilles
- Recommended satellite speakers: VXS1ML
Frequency responce 65Hz-180ΚHz, power 20W noise / 40W program @8ohms, 15W@100V, 98dB max SPL, dimensions 322x162x118mm, weight 2.7 Kg.
|
The compact EVID™ 4.2 delivers very fullrange sound from its dual 4-inch LF drivers and a 1-inch titanium tweeter with waveguide. It is able to deliver a 110-dB sound level over a wide coverage area.
Product Features
- Compact full range
- Ideal for restaurants, bars, patios, and retail
- Vented LF enclosure
- 1-inch titanium diaphragm HF driver with neodymium magnetic structure
- Coherent Coverage Waveguide
- Full-bandwidth overload protection (LF and HF)
- Elliptical weather-resistant ABS enclosure
- Paintable black or white finish
- Magnetically shielded for video applications
- Strong-Arm Mount™ for easy, flexible aiming
General
- Chassis Size: 101.6mm
- Colour: White
- Input Connections: Spring Terminal
- Speaker Type: Full-range, Mid-High, Two-Way
- Frequency Response (-10 dB): 65 - 20000 Hz
- Internal Crossover: Yes
- Sensitivity 1 W/1 m: 89 dB
- Max. SPL/1m (calc): 115 dB
- Coverage (Nominal -6 dB) H: 120°
- Coverage (Nominal -6 dB) V: 80°
- System Power Handling (Continuous/Program/Peak): 100//400 Watts
- LF Transducer: Two 4-inch
- LF Power Handling: Two 4-inch Watts
- HF Power Handling: 1-inch Watts
- HF Transducer: 1-inch
- Nominal Impedance (Passive): 8Ω
- Minimum Impedance: 6Ω
- Outdoor: Yes
Physical & Dimensions
- Height: 309.89mm
- Width: 175.26mm
- Depth: 215.9mm
- Weight: 3.9kg
| MQ 90S is a compact band-pass 8” subwoofer.
It can be connected through a removable Euroblock plug that allows the parallel connection of other loudspeakers.
The cabinet material is MDF with a scratch resistant surface.
The subwoofer has internally a transformer for constant voltage lines (100 or 70 V).
The power selection is made by means of its selector.
It is for indoor use only (avoid to use it in very humid places).
It should be put on the floor of a room where "satellite” loudspeakers (for mid / high frequencies) are already present. MQ 90S belongs to RCF Monitor Q series.
| Acoustical Specifications |
| Type Of Speaker: |
“band-pass" subwoofer |
|
| Frequency Response: |
70 Hz |
÷ 220 kHz |
| Max SPL @ 1m: |
107 dB |
|
| Power Handling: |
60 Watt RMS |
|
| Peak Power Handling: |
120 Watt PEAK |
|
| System Sensitivity: |
89 dB |
|
| Impedance: |
16 Ω |
|
| Crossover frequencies: |
200 Hz |
|
| INPUT SECTION |
| Input connector: |
Removable 4 pole Euroblock |
|
| Constant voltage: |
100 V, 70 V V |
|
| Power Selection: |
60 - 30 - 15 - 7.5 W (100 V) |
|
| CABINET |
| Hardware: |
Material PVC |
|
| Colour: |
White / Black |
|
| PHYSICAL SPECIFICATIONS |
| Height: |
300 / 11.81 |
|
| Width: |
203 / 7.99 |
|
| Depth: |
400 / 15.74 |
|
| Net Weight: |
8.06 / 17.76 |
|
| SHIPPING INFORMATION |
| Package height: |
370 / 14.56 |
|
| Package width: |
265 / 10.43 |
|
| Package depth: |
470 / 18.50 |
|
| Shipping Weight: |
9.24 / 20.59 |
| Powerful, dynamic 2 x 8" Bandpass Subwoofer. Its compact dimensions permit unobtrusive placement of the subbass anywhere, either vertically or horizontally. A 2-channel power amplifier is all that is required to operate e.g. a subbass with up to 4 satellites. Sturdy MDF housing with textured finish.
Specifications 2 x 8" Bandpass Subwoofer:
- Model Name: LDSUB88
- Type: Bandpass
- Components:
- Woofer: 2 x 8" Custom Made
- Power Capacity (Cont./Peak): 2 x 100 W / 2 x 180 W
- Frequency Range: 40 Hz - 120 Hz
- SPL 1 W / 1 m: 92 dB
- Max SPL: 115 dB
- Impedance: 2 x 8 ohms
- Connectors:
- Input: Clamp-type
- Output: Clamp-type
- Cabinet Material: 15 mm MDF
- Cabinet Surface: Painting
- Dimensions: 450 x 500 x 520 mm
|
Reviews
There are no reviews yet.