Content |
Main Features
Output Power per Channel50W
Impedance at Output Level• 4 Ω - 16 Ω (A / B)
• 8 Ω - 32 Ω (A + B)
• 4 Ω - 16 Ω (Bi-wiring)
Number of Channels2
Input Connections• SACD/CD
• Phono (MM)
• Aux
• Network
• Recorder
• Tuner
Output Connections• Recorder
• Phones
Remote ControlYes
Input & Output connections
HeadphoneYes
Large speaker terminalsYes
Phono InputYes
Speaker A/BYes
Audio Features
Bass/Treble Tone ControlsYes
'DIRECT' SwitchYes
Loudness (+)Yes
MutingYes
Source DirectYes
Power Output
Power output per channel50 W
Condition20 Hz - 20 kHz, 4Ω, 0.1 % КНИ
Rated Power Output50 W per channel
Power RequirementsAC 220 - 230 В / 50 Гц
Power Consumption (in use / standby)135 W / 0.30 W
Auto Power DownYes
Construction
Direct Construction (+)Yes
Design- Direct Energy Design Amp
- Symmetrical Power Amp
- Clean Ground Construction
- Isolated Power Supply
- Source Direct Mode
- Trans-Stabiliser
- Speaker A, B, A+B Selector
- Aluminium Panels
- Auto Power Down
Amplifier Specifications
Dimensions (W x H x D)435 x 128 x 360 mm
Weight7.2 kg
|
Technical Specifications
Continuous power output, per channel, 8Ω
- Both channels driven, 8Ω,20Hz-20kHz, 0.2% THD - 200W
- Single, 4Ω, at 1kHz - 400W
Inputs
- Nominal sensitivity for 200W / 8Ω - 1.15V (RCA), 2.3V (XLR)
- Input impedance - 10kΩ
- Frequency response 20Hz-20kHz +/- 0.05dB
- Signal/noise ratio (Awtd) 50W / 8Ω - 110dB
General
- Power consumption (standby) -
|
Τi 60 tube
Integrated tube amp.Four line inputs.
2X12AU7, 4x EL34, 1x12AX7
35 Wrms per chan.4-8 ohm.
Class AB push-pull
Remote control included.
|
Audio Connectivity Features | Analog Audio Input (Rear) | 5 | Phono Input | 1 | FM Tuner Features | Frequency Range MHz | 87.5 MHz | Usable Sensitivity (IHF) | 1.3 μV/13.2 dBf | Signal-to-Noise Ratio (Mono/Stereo) | 70 dB/68 dB | Distortion (Mono/Stereo) | 0.2%/0.3% | Stereo Separation @ 1kHz | 40 dB | Selectivity ±400kHz | 70 dB | AM Tuner Specifications | Frequency Range kHz | 520 kHz | Signal-to-Noise Ratio | 38 dB | Usable Sensitivity (Loop) | 500 μV | Selectivity | (±10 kHz): 30 dB | Distortion | (1 kHz, 50% mod): 1.0% | General Specifications | Power Requirement | 120V AC, 60Hz (USA); 220V – 240V AC, 50Hz/60Hz (EU) | Power Consumption (full power/idle) | 310W maximum, | Dimensions (H x W x D – Metric/English) | 121 mm x 440 mm x 300 mm | |
Advanced original amplifier circuitry and elimination of signal loss—resulting in a truly
emotional and dynamic sound. This is a high-grade integrated amplifier that has inherited
the new sound of Yamaha in the pursuit of rich musicality..
- Floating and Balanced Power Amplifier with MOSFETs
- All-stage fully discrete construction, balanced transmission and low impedance design
- Superior quality electronic volume control for optimum sound
- Large capacity power supply unit delivers energetic, dynamic sound with fast response
- Symmetrical design in pursuit of ideal stereo reproduction
- Discretely configured phono amp
- Headphone amp with fully discrete configuration
- Level meters visually reflect the dynamics in the music
- Elegant design with luxurious real wood panels
- Original speaker terminals combine ease of use and beauty with high sound quality
|
Power Output One Channel Driven :275 watts
Dimensions (Without Brackets, Including Feet) :17-1/16" W x 9-5/8" D x 3-11/16" H (43.34 cm W x 24.45 cm D x 9.37 cm H)
Weight | Metric :28 lbs | 12.70 kg
Dimensions (With Brackets, Feet Removed) :19-1/16" W x 9-5/8" D x 3-7/16" H (41.42 cm W x 24.45 cm D x 8.73 cm H)
Finish :Available in both silver and black
Power Output Two Channels Driven :230 watts each
|
Reviews
There are no reviews yet.