POLK AUDIO RC60i 20-100 W/ch In-Ceiling speaker PAIR

209.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
In-Ceiling Audiophile Magic RC60i’s round profile looks just like a lighting fixture so it will blend into your ceiling without calling attention to itself. But they sound sooooo much better than your typical in-ceiling speakers that resemble a watering spout. RC60i Features: Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, […]

 

Read more

In-Ceiling Audiophile Magic

RC60i’s round profile looks just like a lighting fixture so it will blend into your ceiling without calling attention to itself. But they sound sooooo much better than your typical in-ceiling speakers that resemble a watering spout.

RC60i Features:

  • Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets.
  • RCi speakers utilize the “virtual enclosure” of your in-wall and in-ceiling space to enhance their bass response and smooth low frequency blending with the midrange.
  • Lightweight and stiff blue polymer cones deliver excellent damping and bass response.
  • Durable, computer-modeled, injection-molded butyl rubber surrounds suppress unwanted cone resonances for a lifetime of reliable sound.
  • Aimable swivel tweeters for greater accuracy and more realistic imaging. (All models except RC6s.).
  • Rustproof stainless steel hardware, durable butyl rubber surrounds and powder coated aluminum (in-ceiling) & painted steel (in-wall) grilles make RCi Series speakers suitable for high moisture areas like bathrooms or even under eaves of an enclosed porch. (RCi series are not suitable for exposed outdoor use).
  • RCi speakers have paintable grilles and practically disappear into any room.
  • RCi Series speakers are timbre-matched to other Polk speakers to insure utterly seamless blending from speaker to speaker in systems that combine traditional and built-in speakers.
Dimensions – Cut-Out Diameter 7 5/8 (19.37cm) “
Dimensions – Mounting Depth (includes 1/2 drywall)“ 2 3/8 (6.03cm) “
Dimensions – Overall Depth 2 7/8 (7.30cm) “
Dimensions – Overall Diameter 9 (22.86cm) “
Dimensions – Pre-Construction Bracket PB 60
Driver Complement Mid / Woofer – Diameter 6 1/2 (16.51cm) “
Driver Complement Mid / Woofer – Quantity 1
Driver Complement Mid / Woofer – Type Dynamic Balance driver with mineral-filled polymer cone and rubber surround
Driver Complement Tweeter – Diameter 3/4 (1.91cm) “
Driver Complement Tweeter – Quantity 1
Driver Complement Tweeter – Type Dynamic Balance tweeter with metalized soft dome in ball-and-socket swivel mount
Electrical – Efficiency 89 dB
Electrical – Inputs Spring-loaded clips
Electrical – Lower -3dB Limit 60 Hz
Electrical – Nominal Impedance 8 ohms
Electrical – Recommended Amplifier Power 20 – 100 watts per channel
Electrical – Total Frequency Response 40Hz – 20kHz
Electrical – Upper -3dB Limit 20 kHz
Shipping – Total Shipping Weight 6 pounds
Shipping – Unit of Measure pair
Warranty – Speaker Warranty Lifetime
Weight 3.00 kg

Reviews

There are no reviews yet.

Be the first to review “POLK AUDIO RC60i 20-100 W/ch In-Ceiling speaker PAIR”

Your email address will not be published. Required fields are marked *

Quick Comparison

POLK AUDIO RC60i 20-100 W/ch In-Ceiling speaker PAIR removeJBL CONTROL 62P 2-WAY CEILING LOUDSPEAKER 30W -BLACK- removeJBL CONTROL 24C Ceiling Speaker 2 Way removeDEFINITIVE TECHNOLOGY UIW 63/A IN-CEILING LOUDSPEAKER 10-200W 8Ω -WHITE- (PAIR) removeDEFINITIVE TECHNOLOGY UIW RCS II IN-CEILING LOUDSPEAKER 10-250W 8Ω -MATTE WHITE- removeJBL CSS 8018 2-WAY CEILING LOUDSPEAKER 20W 100V remove
NamePOLK AUDIO RC60i 20-100 W/ch In-Ceiling speaker PAIR removeJBL CONTROL 62P 2-WAY CEILING LOUDSPEAKER 30W -BLACK- removeJBL CONTROL 24C Ceiling Speaker 2 Way removeDEFINITIVE TECHNOLOGY UIW 63/A IN-CEILING LOUDSPEAKER 10-200W 8Ω -WHITE- (PAIR) removeDEFINITIVE TECHNOLOGY UIW RCS II IN-CEILING LOUDSPEAKER 10-250W 8Ω -MATTE WHITE- removeJBL CSS 8018 2-WAY CEILING LOUDSPEAKER 20W 100V remove
Image
SKURC-60iCONTROL 62PCONTROL 24CUIW 63/AUIW RCS IICSS 8018
Rating
Price209.00 incl. GR VAT 152.99 incl. GR VAT 166.00 incl. GR VAT200.62 incl. GR VAT749.00 incl. GR VAT 46.61 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

In stock

In stock

In stock

AvailabilityAvailable on backorderAvailable on backorderIn stockIn stockIn stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content In-Ceiling Audiophile Magic


RC60i's round profile looks just like a lighting fixture so it will blend into your ceiling without calling attention to itself. But they sound sooooo much better than your typical in-ceiling speakers that resemble a watering spout.



RC60i Features:


  • Easy one-cut, drop-in installation puts built-in audio within reach, with Perfect Fit templates, a precision flange, and (available) pre-construction brackets.

  • RCi speakers utilize the "virtual enclosure" of your in-wall and in-ceiling space to enhance their bass response and smooth low frequency blending with the midrange.

  • Lightweight and stiff blue polymer cones deliver excellent damping and bass response.

  • Durable, computer-modeled, injection-molded butyl rubber surrounds suppress unwanted cone resonances for a lifetime of reliable sound.

  • Aimable swivel tweeters for greater accuracy and more realistic imaging. (All models except RC6s.).

  • Rustproof stainless steel hardware, durable butyl rubber surrounds and powder coated aluminum (in-ceiling) & painted steel (in-wall) grilles make RCi Series speakers suitable for high moisture areas like bathrooms or even under eaves of an enclosed porch. (RCi series are not suitable for exposed outdoor use).

  • RCi speakers have paintable grilles and practically disappear into any room.

  • RCi Series speakers are timbre-matched to other Polk speakers to insure utterly seamless blending from speaker to speaker in systems that combine traditional and built-in speakers.
Dimensions - Cut-Out Diameter 7 5/8 (19.37cm) "
Dimensions - Mounting Depth (includes 1/2 drywall)“ 2 3/8 (6.03cm) "
Dimensions - Overall Depth 2 7/8 (7.30cm) "
Dimensions - Overall Diameter 9 (22.86cm) "
Dimensions - Pre-Construction Bracket PB 60
Driver Complement Mid / Woofer - Diameter 6 1/2 (16.51cm) "
Driver Complement Mid / Woofer - Quantity 1
Driver Complement Mid / Woofer - Type Dynamic Balance driver with mineral-filled polymer cone and rubber surround
Driver Complement Tweeter - Diameter 3/4 (1.91cm) "
Driver Complement Tweeter - Quantity 1
Driver Complement Tweeter - Type Dynamic Balance tweeter with metalized soft dome in ball-and-socket swivel mount
Electrical - Efficiency 89 dB
Electrical - Inputs Spring-loaded clips
Electrical - Lower -3dB Limit 60 Hz
Electrical - Nominal Impedance 8 ohms
Electrical - Recommended Amplifier Power 20 - 100 watts per channel
Electrical - Total Frequency Response 40Hz - 20kHz
Electrical - Upper -3dB Limit 20 kHz
Shipping - Total Shipping Weight 6 pounds
Shipping - Unit of Measure pair
Warranty - Speaker Warranty Lifetime

    * Frequency Response (-10 dB)1: 150 Hz - 20 kHz
    * Frequency Range (±3 dB)1: 200 Hz - 17 kHz
    * Power Capacity:
          o 50 Watts Continuous Program Power (2 hrs)
          o 25 Watts Continuous Pink Noise (2 hrs)
          o 30 Watts Continuous Program Power (100 hrs)
          o 15 Watts Continuous Pink Noise (100 hrs)
    * Nominal Sensitivity:
          o 87 dB (4.0 V, 1 W)
          o 84 dB (2.83 V)
    * Nominal Coverage Angle3: 140° (+25°/-50°)
    * Directivity (Q): 4.7
    * Directivity Index (DI): 6.2 dB
    * Rated Maximum SPL @ 1m: 97 dB continuous pink noise, 103 dB peak
    * Rated Impedance: 16 ohms (no transformer taps)
    * Recommended High-Pass Frequency: 150 Hz

Transducer

    * Driver: 60 mm (2.5 in), polypropylene-coated paper with pure butyl rubber surround, 20 mm (¾ in) copper clad aluminum voice coil with vented Nomex® coil-former.

Enclosure

    * Enclosure Material: High impact polystyrene
    * Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
    * Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splashproof rating.
    * Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
    * Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
    * Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
    * Dimensions: 128 mm (5.1 in) diameter x 121 mm (4.8 in) height to top of cabinet. 141 mm (5.6 in) to top of suspension bracket.
    * Net Weight (ea): 0.7 kg (1.5 lbs)
    * Shipping Weight (pair): 2.0 kg (4.3 lbs)
    * Included Accessories: Two suspension cable systems (see "Suspension“, above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors.

Most compact of the JBL ceiling speakers, the Control 24C contains a coaxially mounted 4" woofer and 3/4" titanium-coated tweeter, providing high-fidelity sound over an extremely wide coverage area.

Specifications:

  • 80 Hz to 20 kHz frequency range (-10 dB)
  • 80 watts continuous program power capacity
  • 86 dB sensitivity (1W/1m)
  • 16 ohms nominal impedance
  • 130° conical coverage (polar)
  • Steel back-can with removable locking connector
  • Dimensions (height x diameter): 7.9" x 7.7" (200 x195 mm)
  • Net Weights: 2.7 kg (6 lbs)

Outer Flange Diameter | Metric :8-3/4” | 22.2 cm
Cut Out Diameter | Metric :7-5/8” | 19.4 cm
Depth from Flange | Metric :4-3/8” | 11.11 cm
Driver Complement :One 1" pure aluminum dome tweeter coaxially mounted in a 6-1/2" bass/midrange driver
Frequency Response :30 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Recommended Associated Amplifier Power :10 – 200 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Available Finishes :Paintable White
Packaging :Two to a carton
Weight | Metric :4.5 lbs | 2.0 kg
Warranty :5 Years


Outer Flange Dimensions | Metric :15-1/2” W x 15-1/2” H | 39.4 x 39.4 cm
Cut Out Dimensions | Metric :14-3/8” W x 14-3/8” H | 36.5 x .36.5 cm
Depth from Flange | Metric :5-7/8” | 14.9 cm
Driver Complement :Two 1" pure aluminum dome tweeters; Two 5-1/4" cast-basket bass/midrange drivers pressure coupled to two 6-1/2” bass radiators
Frequency Response :22 Hz – 30 kHz
Impedance :Compatible with 8 Ohm outputs
Sensitivity :
Recommended Associated Amplifier Power :10 – 250 watts
A/V Receiver Crossover Setting :40 Hz
Inputs :One pair of gold plated spring loaded posts
Enclosure :Sealed Medite
Available Finishes :Paintable White
Accessories :Paint mask; Cut-out template
Packaging :One to a carton
Weight | Metric :22 lbs | 10 kg
Warranty :5 Years

* Driver Size (dual-cone) 200 mm (8 in) * Driver Sensitivity (mid-range) (1W [2.83V], 1m, 2k - 6k Hz) 97 dB * Frequency Range (-10 dB) Driver/Grille Assembly: 50 Hz - 17 kHz o Installed in CSS-BB backcan: 90 Hz - 17 kHz * Coverage (2 kHz) 110° * Driver Continuous Power Handling 20 Watts * 100V Taps 10W, 5W, 2.5W * 70V Taps 10W, 5W, 2.5W, 1.3W * 25V Taps 10W, 5W, 2.5W, 1.3W * Transformer Insertion Loss 1.5 dB Maximum * Transformer Connection Bare wire * Motor Mass 283 g (10 oz) * Safety Agency: Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when installed with corresponding UL Listed backcan, below. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849. * Matching CSS Backcan CSS-BB8 (0.15 cu ft) * Bolt Mounting Circle to Backcan 4 points on 286 mm / (11.25 in) diameter * Cutout Diameter o Open-back: 216 mm (8.5 in) o In CSS-BB backcan 295 mm (11.7 in) * Depth (behind grille) 73 mm (2.9 in) * Grille Diameter 327 mm (12.9 in) * Net Weight (ea) 1.58 kg (3.5 lb) * Shipping Weight (ea) 2.25 kg (5.0 lb) * Included Accessories 4 pcs M4 x 40 mm sheet metal screws for attaching speaker/driver/transformer assembly to corresponding backcan.
Weight3.00 kg0.70 kg1.50 kg2.00 kg10.00 kg1.58 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 3.00 kg
Weight 0.70 kg
Weight 1.50 kg
Weight 2.00 kg
Weight 10.00 kg
Weight 1.58 kg