Content |
System type : active vented enclosure subwoofer
Amplifier Continuous Power : 200 W
Frequency response : 40 Hz - 160 Hz
Low Frequency Device : 15'' woofer
Crossover Frequency : 160 Hz, 12 dB/oct. LP - 6 dB/oct. HP
Power Supply : 230 VAC 50 Hz or 117 VAC 60 Hz
Maximum Power Consumption : 510 VA
Connectors : IN: 2 x jack 1/4''
OUT: 2 x jack 1/4''
Construction : 18 mm MDF
Finishing : anti-scratch finish
Mounting Pole : 1 x top
Weight : 31 kg(68.355lb )
Dimensions (W x H x D) : 46.5 x 55 x 48 cm
Controls : volume, gnd. lift
| The Italian Stage S115A 15" Active Subwoofer is ideal for adding powerful yet smooth bass to your live setup. It uses a 15" woofer driven by a 350W RMS class AB amplifier, resulting in 128 peak spl and a 20Hz to 120Hz frequency range. This results in a booming bass sound, that matches precise performance with a punchy sound. The S118A also has a control panel section, with controls for line level, a phase switch, crossover switch - activating a high pass filter for outputs - as well as ground switch.
manufacturer |
ITALIAN STAGE |
Warranty |
2 Years |
Speaker Category |
SubWoofer |
Speaker Type |
Active |
Material of manufacture |
Wood Cabin |
Total Power (Watt) |
350 |
Woofer diameter (inches) |
15 |
dB (max spl) |
128 |
Weight (kg) |
22.5 |
Frequency response (Hz) |
20 to 120 |
Colour |
Black |
|
Are you looking for a deep and punchy bass in a small pack?
The choice is easy: ART 905-AS.
It is an extremely compact and easy to transport high power active subwoofer, just a bit larger than the 902-AS in order to take the newly designed 15” neodymium woofer for a deeper bass punch.
The cabinet is made in Baltic Birch and heavy duty painted.
Acoustical Specifications |
---|
Frequency Response -3 dB: | 40 Hz | ÷ 120 kHz | Max SPL: | 131 dB | | Woofer: | 15“, 3" v.c. | |
INPUT/OUTPUT SECTION |
---|
Input signal: | bal / unbal | | Input connectors: | Stereo combo xlr-jak | | Output connectors: | Stereo xlr | | Input sensitivity: | -2 dBu / +4 dBu | |
PROCESSOR SECTION |
---|
Crossover frequencies: | 80 - 120 Hz | | Protections: | Thermal, rms | | Limiter: | Limiter | | Controls: | Volume, phase, xover | |
AMPLIFIER SPECIFICATIONS |
---|
Total power: | 1000 Watts | | Low frequencies: | 1000 Watts | | Cooling: | Convection / forced | | Connections: | VDE connector in / out | |
CABINET |
---|
Cabinet Material: | Balitc birch | | Handles: | 2 on side | | Pole Mount/Cap: | Yes | | Colour: | Black | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 600 / 23.62 mm/inch | | Width: | 445 / 17.51 mm/inch | | Depth: | 600 / 23.62 mm/inch | | Net Weight: | 34 / 74.95 Kg/Lbs |
|
The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.
- 15-inch DVX woofer for maximum punch
- 1800 W Class-D power amplifier with integrated FIR-Drive DSP
- 134 dB peak SPL
- Special DSP preset for true cardioid performance across the full operating bandwidth
- Combo pole cup (insert and threaded) for use with the ETX Powered Loudspeaker full range models
- Removable casters
Frequency Range | 32 Hz - 180 Hz | Low Pass Frequency | Adjustable: 80 Hz, 100 Hz, 120 Hz, 150 Hz | Maximum SPL | 134 dB peak dB | Power Rating | 1800 W | Frequency Response | 37 Hz - 150 Hz | LF Transducer | DVX3159A 380 mm (15 in) | Connector Type | (2) XLR/TRS Combo Jack and (2) XLR link Output | Enclosure Material | 18-mm, 13-ply birch plywood with EVCoat | Grill | 16AWG steel with powdercoat | Suspension | (8) M10 suspension points | Height | 471 mm (18.54“) | Width | 576 mm (22.68“) | Depth | 825 mm (32.48“) | Weight Net | 41.7 kg (91.93 lbs) | Shipping Weight | 46.8 kg (103.18 lbs) |
|
Description
The all-new DXS15 subwoofer delivers powerful yet focused low end reaching as low as 42Hz. The DXS’s fully optimized band-pass design combines with its powerful Class-D amplifier, long-travel 15” woofer, and formidable DSP to deliver a tight, impressive bass with outstanding depth and high power output.
Features:
- Speaker type: 15" powered subwoofer, Band-pass type
- Frequency range: (-10dB) 45Hz - 160Hz
- Diameter: 15" cone
- Voice Coil: 2.5“
- Output power: Dynamic:950W / Continuous: 600W
- I/O connectors INPUT: XLR-3-31 x2
- I/O connectors THRU: XLR3-32 x 2(Parallel with INPUT)
- Power requirements: 100V - 240V, 50Hz/60Hz
- Power consumption: 120W
- Pole socket: 35mm (Top x1)
- Dimensions (WxHxD): 478mm x 618mm x 624mm
- Net weight: 38.0kg (83.8lbs)
- Others Material: Wood (Paint, Black)
|
User's manual
LD Systems STINGER SUB 15 A G3
Active 15" bass-reflex PA subwoofer
- Active 15” bass reflex PA subwoofer
- High-efficiency 450 watts RMS digital power stage and 133 dB max. SPL
- 15” custom design woofer for extended low end down to 40 Hz
- DynX® DSP technology for distortion-free performance
- 80, 100 and 120 Hz low pass presets
- Cardioid subwoofer array presets
- Horizontal or vertical placement
- 18 mm birch ply cabinet with ultra rugged polyurea finish
- Ergonomic handles and stacking recesses for easy transport and setup
- Shock-resistant front grill provides maximum speaker protection
- Insert for M20 threaded poles
- Smart transport accessories
STINGER SUB 15 A G3
Engineered for rock-solid reliability day in, day out this active subwoofer is a truly professional performer. With built-in presets for quick system integration and a variety of cardioid array configurations it is completely user-friendly. The Stinger® SUB 15 A G3 is powered by high efficiency Class D amplification with a mighty 450 watts RMS output. It drives a custom designed 15” woofer delivering a huge bottom end with terrific punch and excellent definition. The Stinger® SUB 15 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance and pristine, distortion-free bass reproduction at all times. Designed to be a real workhorse throughout, the well-braced bass reflex enclosure is constructed for horizontal and vertical orientation. It is made of rigid 18 mm birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, M20 threaded pole insert, stacking recesses and ergonomic handles the Stinger® 15 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA subwoofer
Type
active
Low/mid driver dimensions
15 "
Woofer Size
381 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
3 "
Woofer voice coil (mm)
76.5 mm
Amplifier
Class D
RMS
450 W
Peak power
900 W
Frequency response
40 - 200 Hz
Max. SPL (peak)
133 dB
Protection circuits
DC , limiter , over voltage , short circuit
Input impedance
30000 Ohm(s)
Input sensitivity
0.3 V
Controls
Main Level , mode
Indicators
limit , mode , on , protect (protection circuit engaged) , signal
Line inputs
2
Line input connectors
6.3 mm Jack , XLR
Line outputs
2
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , SMPS
Power Consumption (max.)
600 VA
Operating Temperature
0 - 40 °C
Relative Humidity:
Cabinet material
18 mm Plywood
Cabinet surface
Polyurea
Cabinet construction
vented
Width
567 mm
Height
477 mm
Depth
624 mm
Weight
31,9 kg
|
Reviews
There are no reviews yet.