Content |
The FiberBeam 250 AT is luminaire used for illuminating fiber optic cables. It is based on double condenser lens with high efficiency spherical mirror. Comes with 250W discharge lamp, 11 dichroic colour filters plus open, effects wheel with 6 colours for colour mixing and sparkling effect, linear mechanical dimmer and strobe-effects. Source Lamp: Compact high-pressure metal halide lamp Base: GY-9.5 Approved model: Philips MSD 250/2 Ballast: Magnetic
Optical System Double condensor lens with high efficiency spherical mirror Manual zoom and focus
Electrical Specification Voltage: 208/230/240V AC, 50/60Hz Power consumption: 400VA
Mechanical Specification Height: 330 mm (13.0“) Width: 287 mm (11.3“) Depth: 362 mm (14.3“) Weight: 13.6 kg (30 lbs) Diameter of fiber adaptor ferrule: 29.7 mm
Thermal Maximum ambient temperature: 45°C ( 113°F) Maximum housing temperature (steady state): 80°C (176°F)
Control and Programming Addressing, special functions setting, effects calibration via control panel with 4-digit LED display Readout fixture and lamp usage, receiving DMX values, temperature, etc. Built-in analyzer for easy fault finding error messages Remotely switching of the lamp Built-in demo sequences Silent fans cooling, remotely controllable speed of fans Self-resetable thermo-fuse Digital serial input DMX-512 4 DMX channels 3 freely-programmable programs, up to 99 steps each Master/Slave operation Stand-alone operation
Electromechanical Effects Colour wheel: 11 dichroic-filters plus white Effect wheel: Cyan, magenta and yellow for additive colour-mixing, 2 additional correction-filters for additive colour-mixtureb (3200K and 5600K), integrated UV-filter, sparkling effect Linear mechanical dimmer, dimmable from 0 % - 100 % Strobe-effect with adjustable speed (1 - 8 flashes per second) Frost-filter |
LED KLS-406 Compact lightset DMX LED spotlight set with RGB LEDs for mobile use Features: > Complete LED light set consisting of slimline 6 spots and a crossbar with integrated DMX control unit and stand adaptor > Ultra-light ideally suited for mobile use > Practical flight case optional > 180 x 10 mm LED per spot (60 x red, 60 x green, 60 x blue) > Movable and tiltable spotlights > DMX-controlled operation or stand-alone operation with processor-controlled color change > Master/Slave operation > Sound-control via built-in microphone with sensitivity control > Convenient control possible via optional 4-pedal foot pedal FP-1 (preset, sound control, freeze, blackout) > DMX512 control via regular DMX controller (occupies 21 channels) > Via DMX, each spot can be individually controlled > DMX functions: dimmer, automatic mode, music control, strobe effect > Addressing and setting via control panel with 4-digit LED display > Suited for installation on a lighting stand (not included) or truss > Spots in black plastic housing > Ideal for bands, stages or solo entertainers > Ready for connection with power cord and safety plug |
- 2 strips with white LEDs provide fast, dynamic strobe sffects
- 70 powerful LEDs 5 mm R/G/B
- 12 powerful LEDs SMD 5050 cold white (CW)
- Flower effect; Strobe effect
- 4 integrated show programs
- Direct color selection for 8 preset colors
- The device is cooled by passive convection cooling
- Control via stand-alone; IR remote control; DMX; Sound to light via Microphone; Master/slave function; QuickDMX via USB (optional); W-DMX by wireless solution via USB (optional); CRMX by LumenRadio via USB (optional)
- Preprogrammed in Light Captain
- With a beam angle of 37°
- With Mounting bracket
- 4 digit 7-segment LED display
Power supply: |
100-240 V AC, 50/60 Hz |
Power consumption: |
10 W |
IP classification: |
IP20 |
Power connection: |
Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided) |
Fuse: |
T 0,5 A Fuse replaceable |
LED: |
70 x 5 mm R/G/B
12 x SMD 5050 cold white (CW) |
DMX channels: |
7 |
DMX input: |
3-pin XLR (M) mounting version |
DMX output: |
3-pin XLR (F) mounting version |
Cooling: |
Passive convection cooling |
Control: |
Stand-alone; IR remote control; DMX; Sound to light via Microphone; Master/slave function; QuickDMX via USB (optional); W-DMX by wireless solution via USB (optional); CRMX by LumenRadio via USB (optional) |
Preprogrammed in: |
Light Captain |
Beam angle: |
37° |
Beam angle (1/2 peak): |
37° |
Housing color: |
Black |
Attachment system: |
Mounting bracket |
Display type: |
4 digit 7-segment LED display |
Dimensions: |
Length: 19,4 cm
Width: 20,2 cm
Height: 12,3 cm |
Weight: |
1,30 kg |
Remote control |
Battery: |
1 x Button cell 3.0 V CR2025 lithium manganese built-in |
Legal specifications |
Special product: |
Not designed for household room illumination |
Intended use: |
Show effect lighting |
|
LED KLS-1001 Compact lightset DMX LED spotlight set with 48 tri-color LEDs for mobile use Features: > Complete LED light set consisting of 4 slimline spots and a crossbar with integrated DMX control unit and stand adaptor > Ultra-light ideally suited for mobile use > Comes pre-assembled with pratical transport bag > 12 tri-color LEDs (TCL) per spot > Through the close chip placement of the multichip technology, an exquisite color mix even with short distances to the illuminated surface is provided > Movable and tiltable spotlights > DMX-controlled operation or stand-alone operation with processor-controlled color change > Master/Slave operation > Sound-control via built-in microphone with sensitivity control > Convenient control possible via optional 4-pedal foot pedal FP-1 or IR remote control > DMX512 control via regular DMX controller (occupies 15 channels) > Optimized for control with the optional control panel DMX LED Operator 4 > Via DMX, each spot can be individually controlled > DMX functions: dimmer, automatic mode, music control, strobe effect > Addressing and setting via control panel with 4-digit LED display > Suited for installation on a lighting stand (not included) or truss > Black lacquered metal version > Ideal for bands, stages or solo entertainers > Ready for connection with power cord and safety plug > 4 IEC outputs for power supply of further devices |
- Logo projector in small design for projecting the desired motifs or advertising logos
- Delivery includes 6 gobos with designs for Easter, Christmas, Halloween, New Year, wedding and birthday
- Easy changing of the gobo foil
- Gobos can be produced by one's own hand (for example with a foil)
- 6-hour or 12-hour timer with automatic daily repetition
- Rugged plastic housing
- 1 powerful LED 7 W high-power cold white (CW) (homogenous color mix)
- Gobo wheel with rotating gobos; Focus manual
- Gobo effect
- The device is cooled by passive convection cooling
- Control via Timer; stand-alone
- With a beam angle of 19°
- With Mounting bracket
- Suitable for outdoor use
- For application areas such as: Wedding/gala/events; Gift idea
- Very quiet working noise
- Rotation speed adjustable
- Suitable for a range of use from 1 to 15 meters
Power supply: |
12 V DC |
Power consumption: |
10 W |
IP classification: |
IP54 |
Power connection: |
Mains input power supply cord with AC adapter |
Cable length: |
Approx. 2,8 m |
Lamp type: |
LED lamp |
LED: |
1 x 7 W high-power cold white (CW) (homogenous color mix) |
Color temperature: |
6500K |
Rotation: |
0 RPM - 2 RPM , 360 ° forward |
Equipment: |
Gobo wheel with rotating gobos; Focus manual |
Gobos: |
Outside diameter 35mm
Image diameter 26mm |
Cooling: |
Passive convection cooling |
Control: |
Timer; stand-alone |
Beam angle: |
19° |
Beam angle (1/2 peak): |
19° |
Housing color: |
Black |
Attachment system: |
Mounting bracket |
Range of use: |
1m - 15m |
Dimensions: |
Width: 13,6 cm
Depth: 17,7 cm
Height: 17,1 cm |
Weight: |
800 g |
Noise classification: |
Class 1 (very slight noise, suitable for noise-sensitiveenvironments) |
Mounting bracket |
Diameter mounting holes: |
1 x Ø6mm |
Material: |
Metal, 1,5 mm |
Holder |
Material: |
Plastic |
Color: |
Black |
External mains adapter |
Power supply: |
100-240 V AC, 50/60 Hz |
IP classification: |
IP44 |
Output: |
12 V DC; 1 A; 12 W |
Stake |
Material: |
Plastic |
Color: |
Black |
Legal specifications |
Special product: |
Not designed for household room illumination |
Intended use: |
Show effect lighting |
| 31309 Showtec Light Effect Starzone
Description and technical specifications
Description Starzone LED Flower Effect on LED
- High light output - Trendy housing
- Control from Music - LED light source
Technical Specifications Starzone LED Flower Effect LED based on LED
Power supply: AC 230V 50/60 Hz Power consumption: 30 Watt max. LED: 64 x 1/4W Operation Mode: Control from Music Dimensions (LxPxH): 300 x 340 x 200 mm Weight: 4.5 kg
|
Reviews
There are no reviews yet.