Content |
The RØDE PinMicTM is a discreet lavalier/lapel microphone with an innovative pin-through design that is not only easier to conceal than a traditional lapel microphone, but provides greater mounting versatility. Comprised of a cabled backplate and a removable omni-directional capsule head, the PinMicTM is easily mounted onto any clothing or fabric by simply pushing the backplate pins through the back of the fabric and sliding the capsule into place on the front. The microphone backplate and cable are hidden behind the fabric, and the capsule head can be easily disguised, covered or decorated to further conceal the microphone. The PinMicTM capsule is discrete at only 9mm deep and 11mm in diameter, and is supplied with both a black and an unpainted silver mesh head that can be further camouflaged by painting. The microphone easily mounts through any fabric up to 1.5mm (0.006“) thick without any damage to clothing. A longer pin version, the PinMicTM-Long is available for mounting on thicker fabrics (up to 3.5mm/0.14" thick). The microphone capsule is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested to ensure reliable performance. The included mini-furry for high wind protection ensures quality recordings in adverse environments, while the anti-trauma water resistant case provides rugged and secure protection for the microphone, a spare capsule head, the microphone cable and included accessories. The PinMicTM is an ideal solution for film, television, video, theatre, house of worship and anywhere where a high quality microphone needs to be heard but not seen. Knowing that versatility is paramount in any product, RØDE has developed the MiConTM connector system which provides seamless integration between the PinMicTM and a wide range of wireless systems as well as consoles, cameras and portable recorders.
- Discreet, low-profile wearable microphone
- MiCon terminator allows for easy adaptation to any XLR or any bodypack transmitter
- Requires MiCon adapter (sold separately)
- Pickup pattern: Omnidirectional
- Capsule: Permanently polarized condenser
- Power: 2V-48V
- Frequency range: 60Hz-18kHz
- Output impedance: 3 kohms (typical)
- Signal noise ratio: 69dB
- Maximum SPL: 110dB
- Weight: .035 oz
- Dimensions: .63" x .87" x 1.3“
- Includes a water-resistant pop filter, a mini-furry (small-scale dead-cat-style windsock), an anti-trauma, water-resistant case
Specification | Detail | Microphone Type | Condenser | Polar Pattern | Omni | Frequency Response | 60Hz-18kHz | Max SPL | 110dB SPL | Output Impedance | 3000 ohms | Signal to Noise Ratio | 69dB | Self Noise | 25dB (A weighted) | Color | Black | Cable Length | 9.8 ft. | Connector | Rode MiCon | Weight | .02 (10g) |
|
All models include foam windscreen, swiveling lapel clip, dual tie clip, pin mount, magnet mount
Subminiature size (5.8 mm diameter x 11 mm height)
Electret condenser cartridge
Unidirectional pattern
One termination: 4-pin mini connector (fits directly into Shure wireless transmitters)
High Boost equalization caps included for optimal clarity and response
Provides a 10 dB boost centered at 12 kHz
Used in applications that require a chest-worn microphone
Black and white models available
All models include magnet mount, lapel clip, dual tie clip, pin mount, and two foam windscreens and carry case
requency response: 20-20,000 Hz
Low visibility with a variety of options for mounting
Low handling noise
Legendary Shure quality, ruggedness, and reliability
|
Type Condenser - Omni
Frequency Ressponse 60Hz - 18kHz
Sensitivity -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Resistance 3000Ω
Dimensions 4.50mmW x 12.00mmH x 4.50mmD
Weight 1.00gm
Accessories Αntitrauma case,WS-LAV, Minifur LAV, Micon cable, Spanner |
Technical Data
Frequency response 40...20.000 Hz
Sensitivity as per 121 TR 9-5 42 mV/Pa +- 3dB
Maximum sound pressure level (passiv) 118 dB (k=1%)
Pick-up pattern cardioid
Dimensions d=12mm, l=26mm
|
Miniaturized lavalier condenser microphone for wireless or wired applications.
The ADX10 is a miniaturized condenser microphone designed for lavaliere applications such as speech, presentation and theatrical production. The ADX10 has the ability to accurately capture and reproduce vocals from a comfortable distance of 4“- 8“. This mic is clear, resistant to feedback and easy to use.
Designed with a uniformly controlled cardioid polar pattern, the ADX10 helps to isolate the area or section being miked from other vocals or instruments on stage. The ADX10 has a smooth, accurate frequency range of 50 Hz - 18 kHz. This mic is lightweight, low profile and has a natural sound with exceptional sound response.
Primarily for use with the Audix RAD360 Wireless System, the ADX10 includes a tie-clip and a 3' attached cable terminating to a mini-XLRf connector.
MODEL VARIATIONS:
ADX10P - For hard wired application. Includes an 8' cable terminating to a mini-XLRf connector tie clip, external windscreen and a phantom power adapter module. 9 - 48 V phantom power required.
Type | Pre-polarized Condenser | Polar Pattern | Cardioid | Frequency Response | 50Hz - 18kHz | Impedance | 250 Ohms | Sensitivity | 5 mV/Pa @1k |
|
Lavaliere Microphone for WS 100 BP Belt Pack and for WS 1616 BP Belt Pack - Uni-directional Electret Condenser Lavaliere Microphone
- Impedance
- Frequency range : 20 Hz – 20 KHz
- Sensitivity : -44 ± 2 dB (at 1 KHz)
Product type
Wireless Microphone System Accessories
Type
Microphones
Frequency response
20 - 20.000 Hz
Directivity
cardioid
Nominal impedance
680 Ohm(s)
Phantom power requierements
5 V
Microphone input
mini-XLR (3-pin, female)
Accessories (included)
attaching clip , Foam windscreen
Weight
0,04 kg
|
Reviews
There are no reviews yet.