RODE RODELink Filmmaker Kit

319.00 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
OLED display (on receiver) One button pairing Three level gain control AA battery or USB powered Includes RØDE\’s broadcast Lavalier microphone RØDELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible […]

 

Read more

OLED display (on receiver)
One button pairing
Three level gain control
AA battery or USB powered
Includes RØDE\’s broadcast Lavalier microphone
RØDELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres (over 100 yards). The RØDELink Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8″ thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RØDEʼs omnidirectional Lavalier microphone is included in the kit to provide the highest possible audio reproduction quality.

RØDELink Filmmaker Kit Specifications
Transmission type    2.4GHz Fixed Frequency Agile System
System dynamic range    112dB
Range (distance)    100m
Frequency range    35Hz – 22kHz
Maximum output level    1v Rms (2.8v P-p)
Max input signal level    1v Rms (2.8v P-p)
Max latency    4ms
Receiver (RX-CAM)
Power source    2 X AA Battery Or MicroUSB
Antenna    Internal
Output connection    3.5mm TRS Locking Jack Socket – Dual Mono
Output impedance    300Ω
Dimensions    111mm X 65mm X 52mm
Weight    190gm
Transmitter (TX-BELT)
Power source    2 X AA Battery Or MicroUSB
Antenna    Internal
Output connection    3.5mm TRS Locking Jack Socket
Output impedance    10kΩ
Dimensions    111mm X 65mm X 40mm
Weight    190gm
Lavalier
Acoustic Principle    Pressure Gradient
Active Electronics    JFET impedance converter
Capsule    0.10“
Address Type    End
Frequency Range    60Hz – 18kHz
Output Impedance    3000Ω
Maximum SPL    110dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level    189.0dBu (@ 1kHz, 1% THD into 1KΩ load
Sensitivity    -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted)    25dB-A
Weight    1.00gm
Dimensions    12.00mmH x 4.50mmW x 4.50mmD
Warranty    10 year warranty

Weight 0.42 kg

Reviews

There are no reviews yet.

Be the first to review “RODE RODELink Filmmaker Kit”

Your email address will not be published. Required fields are marked *

Quick Comparison

RODE RODELink Filmmaker Kit removeAUDIO TECHNICA AT8015 SHOTGUN BROADCASTING MICROPHONE WITH BATTERY removeRODE BROADCASTER PRECISION 1 removeRODE NTG4 SUPER CARDIOID SHOTGUN MICROPHONE removeRODE VIDEOMIC GO DVCAM DIRECTIONAL CONDESER MICROPHONE removeRODE VIDEOMIC RYCOTE DIRECTIONAL CONDESER MICROPHONE remove
NameRODE RODELink Filmmaker Kit removeAUDIO TECHNICA AT8015 SHOTGUN BROADCASTING MICROPHONE WITH BATTERY removeRODE BROADCASTER PRECISION 1 removeRODE NTG4 SUPER CARDIOID SHOTGUN MICROPHONE removeRODE VIDEOMIC GO DVCAM DIRECTIONAL CONDESER MICROPHONE removeRODE VIDEOMIC RYCOTE DIRECTIONAL CONDESER MICROPHONE remove
Image
SKUH11RD00049AT8015H11RD00014H11RD00046H11RD00042H11RD00038
Rating
Price 319.00 incl. GR VAT 368.00 incl. GR VAT 439.00 incl. GR VAT 269.00 incl. GR VAT 73.15 incl. GR VAT 119.00 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

In stock

In stock

Only 1 left in stock

Only 1 left in stock

Only 1 left in stock (can be backordered)

AvailabilityOnly 1 left in stock (can be backordered)In stockIn stockOnly 1 left in stockOnly 1 left in stockOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentOLED display (on receiver) One button pairing Three level gain control AA battery or USB powered Includes RØDE\'s broadcast Lavalier microphone RØDELink represents the next generation of digital wireless systems. Using a series II 2.4GHz digital transmission with 128-bit encryption, it is able to constantly monitor and hop between frequencies to maintain the strongest possible signal level at a range of up to 100 metres (over 100 yards). The RØDELink Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone. The receiver (RX-CAM) features an OLED display with information on level, battery status (receiver and transmitter), mute and channel selection. The unit can be mounted on a standard camera shoe mount, 3/8" thread or belt-clip, and for added versatility the shoe mount can be located in one of two positions. The lightweight transmitter (TX-BELT) can be fitted to a belt or clothing and features a locking thread to ensure the microphone connection is as secure as possible. RØDEʼs omnidirectional Lavalier microphone is included in the kit to provide the highest possible audio reproduction quality. RØDELink Filmmaker Kit Specifications Transmission type    2.4GHz Fixed Frequency Agile System System dynamic range    112dB Range (distance)    100m Frequency range    35Hz - 22kHz Maximum output level    1v Rms (2.8v P-p) Max input signal level    1v Rms (2.8v P-p) Max latency    4ms Receiver (RX-CAM) Power source    2 X AA Battery Or MicroUSB Antenna    Internal Output connection    3.5mm TRS Locking Jack Socket - Dual Mono Output impedance    300Ω Dimensions    111mm X 65mm X 52mm Weight    190gm Transmitter (TX-BELT) Power source    2 X AA Battery Or MicroUSB Antenna    Internal Output connection    3.5mm TRS Locking Jack Socket Output impedance    10kΩ Dimensions    111mm X 65mm X 40mm Weight    190gm Lavalier Acoustic Principle    Pressure Gradient Active Electronics    JFET impedance converter Capsule    0.10“ Address Type    End Frequency Range    60Hz - 18kHz Output Impedance    3000Ω Maximum SPL    110dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level    189.0dBu (@ 1kHz, 1% THD into 1KΩ load Sensitivity    -33.5dB re 1 Volt/Pascal (21.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted)    25dB-A Weight    1.00gm Dimensions    12.00mmH x 4.50mmW x 4.50mmD Warranty    10 year warranty

Designed for video production and broadcast (ENG/EFP) audio acquisition, the AT8015 provides the narrow acceptance angle desirable for long-distance sound pickup, along with excellent sound rejection from the sides and rear of mic. The roll-off position reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically coupled vibrations.

Designed for video production and broadcast (ENG/EFP) audio acquisition
Provides the narrow acceptance angle desirable for long-distance sound pickup
Excellent sound rejection from the sides and rear of mic
Switchable low-frequency roll-off
Operates on battery or phantom power
RoHS compliant - free from all substances specified in the EU directive on hazardous substances

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Line + gradient
Frequency Response: 40-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: Phantom: -38 dB (12.5 mV) re 1V at 1 Pa Battery: -39 dB (11.2 mV) re 1V at 1 Pa
Impedance: Phantom: 250 ohms Battery: 300 ohms
Maximum Input Sound Level: Phantom: 132 dB SPL, 1 kHz at 1% T.H.D. Battery: 120 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: Phantom: 110 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 72 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3
Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
Switch: Flat, roll-off
Weight: 195 g (6.9 oz)
Dimensions: 460.0 mm (18.11“) long, 21.0 mm (0.83“) diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8405a stand clamp for 5/8“-27 threaded stands; 5/8“-27 to 3/8“-16 threaded adapter; AT8135 windscreen; battery; protective carrying case

Broadcaster - ?The Master of the Airwaves?

Like its name suggests this R?DE microphone was specifically designed ?ON-AIR?
applications where wide frequency response and low distortion are demanded.
Winner of the Radio World/US National Association of Broadcasters (NAB) ?What?s
Cool? award in 1998, the Broadcaster has become an industry standard when studio
sound quality is required for on air applications.
Utilizing an Australian designed and manufactured R?DE 1? externally biased condenser
transducers, the Broadcaster features a switch-able high pass filter to remove low frequency
rumble. A unique ?ON-AIR? LED indicator can be switched ?on? or ?off? by shorting contacts
on the 5 pin audio connector. This feature allows console operators to warn the ?Talent?
that the mic is live. 

SPECIFICATIONS:
Features:
True condenser transducer On-Air indicator L.E.D. Ultra low noise
Cardioid polar pattern with high 180 rejection Voice tailored Low Cut
Filter Internal Pop Filter Rugged stainless steel body
Acoustic principle: Externally polarised 25mm (1?) condenser
Directional pattern:  Cardioid
Frequency range: 20 Hz ~ 20 kHz
Output impedance:  40Ω
Signal noise ratio din iec 651:
>80 dB (1kHz rel 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 114 dB (per IEC651, IEC268-15)
Power supply voltage: P48, P24 phantom
Weight without battery: 577g
Weight with battery: 1.3kg
Dimensions width: 167mm
Dimensions depth: 50mm
Dimensions height: 50mm
Maximum output voltage: +2 dBu (@ 1% THD into 1kΩ)
 


Broadcast sound quality
Low noise circuitry
Rugged metal construction
Convenient digital switching
High Frequency Boost
High Pass Filter (Flat/75Hz)
PAD (-10db)
Ten year extended warranty with online registration
The NTG4 builds on the platform created by RØDE's award-winning NTG1 shotgun microphone. A broadcast-quality directional condenser microphone designed to provide premium audio recording in a versatile range of applications including on-camera and boom mounted.

Visit the NTG4 feature page

NTG4 Specifications
Acoustic Principle    Line Gradient
Capsule    0.50“
Polar Pattern    Supercardioid
Address Type    End
Frequency Range    20Hz - 20kHz(selected HPF @75Hz)
Output Impedance    200Ω
Maximum SPL    135dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity    -32.0dB re 1 Volt/Pascal (25.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted)    16dB-A
Power Options    +12V phantom power+24V phantom power+48V phantom power
Weight    126gm
Dimensions    225mmH x 22mmW x 22mmD
Output    XLR Output
Warranty    1 year with free extension to 10 years following registration

Clear, directional audio on the GO!

Compact and light weight by design, the VideoMic GO delivers clear, crisp, directional audio with incredible ease of use. Its tight pickup area focuses directly in front of the microphone and reduces other surrounding sounds, ensuring that your subject is isolated from distracting background noise.

The integrated Rycote® Lyre® shock mount isolates your microphone from bumps and vibrations that could otherwise interfere with your sound.

Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

The VideoMic GO has no complicated switches or settings and is powered by your camera's external microphone input, requiring no batteries to operate, ensuring you never miss a great shot.

Acoustic Principle Line Gradient
Frequency Range 100Hz ~ 16,000Hz
Equivalent Noise 34dBA SPL (A - weighted per IEC651)
Signal Noise 60dB SPL (A - weighted per IEC651)
Power Required Plug-in power required (330uA @ 2.5V)
Dimensions 167mmL x 79mmH x 70mmD
Directional Pattern Super-Cardioid
Sensitivity -35dB re 1V/Pa (17.8mV @ 94dB SPL) ±2dB @ 1kHz
Maximum SPL 120dB (@ 1kHz, 1% THD into 1kΩ load)
Dynamic Range 96dB (per IEC651)
Output Connection 3.5mm stereo mini-jack
Weight 73g
The RØDE VideoMic is a professional grade 1/2" condenser shotgun microphone designed for use with consumer video cameras and personal audio recorders. The integrated shock mounting system isolates the VideoMic capsule and electronics from its all-metal shoe mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Its standard sized shoe mount also includes a 3/8" thread in the base for easy mounting on a boom pole or stand. (note that cameras with proprietary sized mounts require an additional adaptor.) Its super cardioid polar pattern is highly directional, focusing on the subject in front of the camera, and minimising any surrounding sounds. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded. A -10dB and -20dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as live music or motorsport. The RØDE VideoMic directional on-camera microphone is covered by RØDE Microphones' industry leading 10 year warranty.
Frequency response 40Hz-20kHz, selectable HPF @ 80Hz/12dB/octave
Sensitivity -38 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Ιmpedance 200Ω
Τotal harmonic distortion 134dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Dimensions 250mm x 65mmx 102mm
Weight 176gm
Weight0.42 kg0.30 kg2.50 kg0.20 kg0.10 kg1 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.42 kg
Weight 0.30 kg
Weight 2.50 kg
Weight 0.20 kg
Weight 0.10 kg
Weight 1 kg