ROLAND PCS-20A DC PARALLEL CORD FOR BOSS PEDALS 8-PIN

This "daisy-chain" cable allows for powering multiple BOSS compact pedals from a single pedal like the LS-2, TU-2, or NS-2.

User\'s manual

• Universal 9 volt DC power supply
• 5 outlets with ultra stable 250 mA each
• Isolated
• Overload protection
• Roadworthy enclosure
• Mounting and strain relief options
• Power, merge and daisy chain cables included

With a stable 250 mA on each of the five center negative barrel style outlets the compact Palmer PWT 05 MK2 is most suited to virtually any pedalboard size. To deliver clean DC power to your pedals and eliminate ground loops between them and the associated hum the outlets are isolated.

The PWT 05 MK2 is protected against overloading and comes with 25 and 50 cm long connection cables, as well as two Y-cables. The first one, with a black connector, connects two 9 V outputs to increase the current intensity to a massive 500 mA, the other one, with a white connector, connects two 9 V outputs to double the voltage to 18 V.. Also included is a 1-into-5 daisy chain that lets you power five pedals from one output if their total current draw does not exceed 250 mA. The rugged enclosure of the Palmer PWT 05 MK2 provides mounting and cable relief options while the IEC mains inlet and voltage selector enable worldwide use.

Universal Effects Pedal Floor Board with Integrated Power Supply
Ultra-compact and lightweight pedal board for transporting up to 12 effects pedals
Generous 1.7 A power adapter included for powering more than 12 devices*—includes all cabling
Ultra-rigid plastic design withstands even heavy impact
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

Love your pedal chain? Rather than tossing your effects and their individual power adapters into a duffel bag after a gig, keep them safe—and ready to rock at a moment's notice—with the PB1000.
It's all about connections
This pedal board makes hooking up 12 2.5" x 4.5" pedals as easy as hooking up just one (of course, if you're using pedals that aren't 2.5" x 4.5“, the snug foam padding can be cut to accommodate pedals of varying shapes). The PB1000 includes ¼" patch cables, so you can leave your pedals connected to one another, ready to pass signal even when you're transporting them. It also comes with 1 x 12 daisy chain cabling so that when you plug in the 1.7 A power adapter, all your pedals receive power.
The Ins and Outs
Connect your guitar, bass or keyboard to the single ¼" input in the upper right corner of the board. A pair of ¼" FROM EFFECTS jacks in the upper left corner allow you to connect stereo effects, and two ¼" OUTPUT TO AMP jacks send a left and right stereo signal to up to two amps. When it is time to load out, just unplug the power supply, disconnect your guitar and amp, put the lid back on the PB1000 and slide the locking latches back into place. The heavy-impact plastic casing will protect your pedals from the rigors of the road.
Value
You have invested considerable time and money into your effects chain. Keep it safe and sounding great with the PB1000. Check it out at your nearest BEHRINGER dealer.

 User's Manual

Keep your pedals powered all night long with the MXR DC Brick, a revamp of the DCB10. Now under the MXR brand, the new DC Brick features all of the short circuit and overload protection of the original but now handles twice the power, allowing you to use virtually any combination of effects. Additionally, each 9v output has a red LED that illuminates if there is a short so you can quickly identify and troubleshoot any power problems. The MXR DC Brick has eight 9v outputs and two 18v outputs, a change from the DCB10ʼs seven 9v outputs and three 18v outputs. And of course, the AC adapter and all necessary cables to connect pedals to the unit are included.

The Korg KA189 Power Supply is a power supply, for microKORG, Electribe A,R,S, microKONTROL, padKONTROL, SDD-3000 PEDAL, AX1500G, AX3000G/B, D3, VOX Dynamic Looper, VOX-JS, Cooltron, with 9V voltage, and 1100mA output current.

The main features of the Korg KA189 Power Supply include:

• Suitable for: microKORG, Electribe A,R,S, microKONTROL, padKONTROL, SDD-3000 PEDAL, AX1500G, AX3000G/B, D3, VOX Dynamic Looper, VOX-JS, Cooltron
• Voltage: DC
• Output Current: 1100 mA
• Output Voltage: 9V

The Electro-Harmonix 9.6DC-200 Adaptor is the player's choice of battery eliminator.