SAMSON XM610 – Powered Mixer 6CH. 2x300W 4Ω

The XM610 gives you all the features you need for solid professional sound reinforcement.
With 600 watts of total system power there's more then enough power to fill your favorite
bar, club, or whatever venue you're playing

FEATURES:
6-channel, 600-watt powered mixer featuring a high-impact molded plastic Kickback?
chassis
Studio quality 24-bit DSP effects with 100 selectable presets of reverb, delay and chorus
Channel strips featuring low noise mic pre-amps with available 48-volt phantom power,
3-band equalization, DSP effect and monitor sends
7-band graphic EQ for both the main and monitor outputs.
Solid construction with convenient carry handle for easy transport

SPECIFICATIONS:
Rated Output power 300W/4Ω@0.1% THD at
1KHz per amplifier
Frequency response 20Hz~20KHz+/-0.5dB@1W
Output into 8Ω (AMP OUT);
20 Hz~20KHz+/-
0.4dB@+4dB Output into
10kΩ (MAIN OUT, MONITOR
OUT, AUX 2 SEND)
Total Harmonic Distortion Less than 0.06% @ 20Hz~
20KHz, 75W output into
4Ω (AMP OUT); Less than
0.1%@20 Hz~20KHz +4dBu
output into 10KΩ (MAIN OUT,
MON OUT, AUX 2 SEND)
HUM & Noise -121dB equivalent input noise
(Average, RS+150Ω) -100dB residual output noise
(MAIN OUT, MONITOR OUT,
AUX 2 OUT)
(with 22Hz~22KHz BPF) -79dB (MAIN OUT, MONITOR
OUT) Master level control at
maximum, all channel level
controls at minimum; -79dB
(AUX 2) Master level control
at maximum, all channel level
controls at minimum
Maximum Voltage Gain 67dB CH IN (MIC) to AMP OUT
48dB CH IN (MIC) to MAIN OUT, MONITOR OUT
54dB CH IN (MIC) to AUX 2 OUT
30dB CH IN (MIC) to REC OUT
32dB CH IN (LINE) to MAIN OUT, MONITOR OUT
26dB AUX IN to MAIN OUT
24dB TAPE IN to MAIN OUT
Crosstalk 1KHz 70dB adjacent input, 70dB
input to output
Input Channel Equalization
HIGH 12KHz shelving (+/- 15dB
maximum)
MID 2.5KHz peaking (+/- 12dB
maximum)
LOW 80Hz shelving (+/- 15dB
maximum)
Meters 7 POINT LED METERS (-20,
-10, -7, -4, 0, +3, +6dB)
Graphic Equalizer 7 bands (63, 160, 400, 1K,
2.5K, 6.4K, 16KHz)
Internal DSP Effects 24 BIT - 10 Presets each:
1 - Performance; 2 - Hall
Reverb, 3 - Plate Reverb;
4 - Spring Reverb; 5 - Echo;
6 - Flange + Verb; 7 - Chorus
+ Verb; 8 - Echo + Verb; 9-
Chorus; 10- Flange
Phantom Power +48V
CLIP Indicators Turn on: THD> 0.1%
Foot Switch DIGITAL EFFECT MUTE: ON/OFF
Power Requirement 110V-240V, 50/60Hz
Power Consumption 350W 1/8 power, 900W MAX.
Weight 40 lbs. (18.2Kg)
Dimensions (W x H x D) 21 1/4? x 13 1/4? x 13 3/4?
540mm x 338mm x 348mm

• FLS Feedback Locating System
• Master Mute for channels 1-7
• Footswitchable effects defeat
• Combination XLR and 1/4 input jacks
• RCA, 1/8" Media input
• Selectable 9-Band Graphic EQ with FLS
• Selectable Main or Monitor dual power section
• RCA Record outputs
• LED Meter bridge
• Digital effects parameter control
• Power amp sub-sonic filtering
• On-board 24- bit digital effects with mute button
• Clip light and signal present indicator
• Kosmos-C
• Main line level 1/4" output
• Mid-Morph EQ
• DDT Speaker protection circuit
• 48 Volt Phantom Power
• Bluetooth? streaming audio
• Weight Unpacked: 10.44 kg
• Weight Packed: 11.8 kg
• Width Packed: 35.56 cm
• Height Packed: 55.88 cm
• Depth Packed: 34.925 cm

The Phonic Powerpod Series are powered mixers in a compact and durable design. The Powerpod 415RW has four Mic/Line input channels and a built-in 150 Watt amplifier, as well as onboard USB module for recording and playback and Bluetooth Module for wireless audio streaming. The 2-band EQ on every channel gives you maximum control over your mix, and the Powerpod 415 RW's built-in variable digital delay allows users to better tweak their mix. Powerpod Series Powered Mixers are great all-in-one mixer/amplifiers for bands, traveling musicians, school auditoriums, houses of worship and clubs. 

Features:

• Built-in 150W output power
• 4 Mic/Line input channels
• USB recorder and playback device for capturing all performances with ease
• Bluetooth audio streaming
• Variable digital delay with time and repeat control
• Main insert point via 1/4" TRS jack
• Super musical 2-band EQ on mono channels

500-Watt 10-Channel Powered Mixer with KLARK TEKNIK Multi-FX Processor, Compressors, FBQ Feedback Detection System and Wireless Option

• Ultra-compact 2 x 250-Watt stereo powered mixer
• Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
• 8 "Invisible” IMP mic preamps with switchable +48 V phantom power for condenser microphones
• Ultra-high quality KLARK TEKNIK FX processor with 25 presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
• Studio-grade compressors with super-easy "one-knob” functionality and control LED for professional vocal and instrumental sound
• Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal

• “Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
• 10-channel mixer section features 6 mono and 2 stereo channels plus separate Aux input
• Effective, extremely musical 3-band EQ, switchable Pad and Clip LEDs on all mono channels
• Stereo 7-band graphic EQ allows precise frequency correction of monitor and main outputs
• Selectable stereo (main L/R), double mono (main/monitor) amplifier operation
• Speaker Processing function adjusts frequency response to match professional speaker systems like BEHRINGER EUROLIVE series, etc.
• Standby switch mutes all input channels during breaks while background music is provided via Aux input
• Adjustable stereo Aux input for connecting external signal sources
• Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption
• Rack mount brackets included
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

• Integrated 1260 W Power Amplifier
• 8 Mono Mic/Line Inputs
• Four Stereo Inputs
• Hi-Z Input on Channel 4
• Two Aux Sends w/ Dedicated Outputs
• 3-Band EQ on Each Channel
• Master EQ for Music Playback or Speech
• Integrated Feedback Suppressor
• Built-In SPX Multi-Effects
• Compatible with 4 and 8 Ohm Speakers