SAMSON XM910 – Powered Mixer 10CH 2X450W 4Ω

Samson?s XM910, combining mixer, effects, equalization and amplifier power
into a compact and portable, yet extremely powerful system, perfect for any
gig big or small.

FEATURES:
10-channel, 900-watt stereo powered mixer featuring a high-impact molded plastic
Kickback? chassis
Studio quality 24-bit DSP stereo effects with 100 selectable presets of reverb, delay
and chorus
Channel strips featuring low noise mic pre-amps with available 48-volt phantom power,
3-band equalization, DSP effect and monitor sends
10-band graphic EQ for the stereo main outputs, plus a 10-band EQ for the monitor output.
Dual CD inputs with trim and crossfader for instant DJ applications
Solid construction with convenient carry handle for easy transport

SPECIFICATIONS:
Rated Output power 2 X 450W at 4Ω @0.1% THD,
1KHz
Frequency response 20Hz~20KHz+/-0.7dB@1W
Output into 8Ω (AMP OUT);
20 Hz~20KHz+/-0.4@+4dBu
Output into 10kΩ (MIX OUT,
AUX 1 SEND, AUX 2 SEND,
TAPE OUT)
Total Harmonic Distortion Less than 0.06% @ 20Hz~
20KHz, 75W output into
4Ω (AMP OUT); Less than
0.1%@ 20Hz~20KHz+4dBu
output into 10KΩ (MIX OUT,
AUX 1 SEND, AUX 2 SEND
TAPE OUT)
HUM & Noise -121dB equivalent input noise
(Average, RS+150Ω) -100dB residual output noise
(MIX OUT, AUX 1 SEND, AUX
2 SEND)
(with 22Hz~22KHz BPF) -79dB (MIX OUT, AUX 1
SEND OUT) Master level
controls at maximum; all
channel level control at
minimum.
-79dB (AUX 2) Master level
control at maximum, all channel
level controls at minimum
Maximum Voltage Gain 67dB CH IN (MIC) to AMP OUT
63dB CH IN (MIC) to MAIN OUT, MONITOR OUT
54dB CH IN (MIC) to AUX 2 OUT
30dB CH IN (MIC) to REC OUT
32dB CH IN (LINE) to MAIN OUT, MONITOR OUT
26dB AUX IN to MAIN OUT
24dB TAPE IN to MAIN OUT
Crosstalk, 1KHz 70dB adjacent input, 70dB
input to output
Input Channel Equalization
HIGH 12KHz shelving (+/- 15dB
Maximum)
MID 2.5KHz peaking (+/- 12dB
Maximum)
LOW 80Hz shelving (+/- 15dB
Maximum)
Meters 9 POINT LED METERS (-20,
-15, -10, -7, -4,-2, 0, +2, +4dB)
Graphic Equalizer 10 bands (30, 63, 125, 250,
500, 1K, 2K, 4K, 8K, 16KHz)
Internal DSP Effects 24 BIT - 10 Presets each:
1 - Performance; 2 - Hall Reverb,
3 - Plate Reverb; 4 - Spring
Reverb; 5 - Echo; 6 - Flange +
Verb; 7-Chorus + Verb; 8 - Echo
+ Verb; 9 - Chorus; 10- Flange
Phantom Power +48V
CLIP Indicators Turn on: THD> 0.1%
Foot Switch DIGITAL EFFECT MUTE: ON/OFF
Power Requirement 110V-240V, 50/60Hz
Power Consumption 380W 1/8 power, 1500W MAX.
Weight 46 lbs. (21Kg)
Dimensions (W x H x D) 21 1/4? x 13 1/4? x 13 3/4?
540mm x 338mm x 348mm

• Integrated 1260 W Power Amplifier
• 8 Mono Mic/Line Inputs
• Four Stereo Inputs
• Hi-Z Input on Channel 4
• Two Aux Sends w/ Dedicated Outputs
• 3-Band EQ on Each Channel
• Master EQ for Music Playback or Speech
• Integrated Feedback Suppressor
• Built-In SPX Multi-Effects
• Compatible with 4 and 8 Ohm Speakers

The Phonic Powerpod Series are powered mixers in a compact and durable design. The Powerpod 415RW has four Mic/Line input channels and a built-in 150 Watt amplifier, as well as onboard USB module for recording and playback and Bluetooth Module for wireless audio streaming. The 2-band EQ on every channel gives you maximum control over your mix, and the Powerpod 415 RW's built-in variable digital delay allows users to better tweak their mix. Powerpod Series Powered Mixers are great all-in-one mixer/amplifiers for bands, traveling musicians, school auditoriums, houses of worship and clubs. 

Features:

• Built-in 150W output power
• 4 Mic/Line input channels
• USB recorder and playback device for capturing all performances with ease
• Bluetooth audio streaming
• Variable digital delay with time and repeat control
• Main insert point via 1/4" TRS jack
• Super musical 2-band EQ on mono channels

• • Ultra-compact 500-Watt powered mixer
  • Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
  • Ultra-high quality KLARK TEKNIK FX processor with 25 presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
  • Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies for easy feedback removal
  • “Wireless-ready" for high-quality BEHRINGER digital wireless system (not included)
  • 5-channel mixer section features 5 mic/line channels plus separate Aux input

• 5 high-quality mic preamps with switchable Pad and Clip LEDs
• Effective, extremely musical 2-band EQ on all channels
• 7-band graphic EQ allows precise frequency correction
• 2 speaker outputs on 1/4" jack connectors
• Internal switch-mode power supply, noise-free audio, superior transient response and very low power consumption
• Rack mount brackets included
• 3-Year Warranty Program*
• Conceived and designed by BEHRINGER Germany

This innovative product comes in a very modern and user-friendly design. It combines finest analogue input circuitry and operating surface with the advantages of its digital master and amplifier section making for a new dimension of flexibility in its class. The acoustical performance meets everything that you have come to expect from a quality Dynacord product.

Its feature package includes: 5 MIC/LINE input channels with compressor / limiter and talk-over function, 3 Stereo Inputs including Jack, RCA and USB connectors, onboard player for MP3 or WAV audio files, high quality effects section with 32 editable presets, 3 Master outputs with 7-band EQ each and flexible signal routing options, delay line for Master-B (150 msec / 50m), headphones control, LPN speaker processing, class-D  2 x 450W RMS respectively 2 x 600W / 4 Ohms IHF-A power, micro-controlled power supply (100V – 240V), Direct-Drive option for 100V speaker lines, comprehensive protection package, live and install connectivity, optional rack mount kit.

The input structure of the PM 502, along with the entire feature package and connectivity, positions this mixer at the heart of many installations ranging from Bistros, small clubs, lounges, boutiques, hotel bars and lobbies to churches, mosques and a wide range of similar applications. Further the PM 502 is an extremely versatile tool for a multitude of live applications. It will be the ideal choice for entertainers, DJs and small bands looking for a compact and light-weight solution for live applications or rehearsal venues. The onboard MP3-Player on the front, allows the user to easily play pre-recorded music from a USB stick or a hard drive. The digital USB interface on the rear also allows for basic recording.

Channels (mono + stereo)
5 + 3
Microphone inputs
5 x XLR/Jack socket
Auxiliaries (FX, AUX)
1 Post, 1 Pre
Rated output power, 20-20000 Hz, THD -
into 4 Ω
640 W
into 8 Ω
350 W
Max. dual channel output power, dynamic headroom, IHF-A
-
into 4 Ω
2 x 600 W
into 8 Ω
2 x 340 W
Max. single channel output power, continuous, 1 kHz, THD = 1%
-
into 4 Ω
500 W
into 8 Ω
280 W
Max. midband output power, 1 kHz, THD = 1%, dual channel
-
into 4 Ω
2 x 450 W
into 8 Ω
2 x 270 W
Rated output power, 20-20000 Hz, THD -
into 4 Ω
2 x 400 W
into 8 Ω
2 x 240 W
Max. output power, Direct Drive mode (bridge configuration), continuous, 1 kHz, THD = 1%
-
into 12 Ω
680 W
Maximum output voltage, power amplifier, 1 kHz, no load
-
Dual channel mode
52 Vrms
Direct Drive mode
100 Vrms
THD, at 1 kHz, MBW = 22 kHz
-
MIC input to master A L/R outputs, +10 dBu, typical
MIC iput to speaker output
DIM 30, MIC input to speaker output, 3.15 kHz, 15 kHz
IMD-SMPTE, MIC input to speaker outputs, 60 Hz, 7 kHz
Frequency response, -3 dB, ref. 1 kHz
-
Any input to any Mixer output
15–22000 Hz
Any input to Speaker output
20–22000 Hz
Microphone mute switch attenuation
-
Amplifier Ch1/Ch2
Channel to channel
Microphone mute switch attenuation
> 100 dB
Channel VOL and FX/AUX send attenuation
> 85 dB
CMRR, MIC input, 1 kHz
> 80 dB
Input sensitivity, all level controls in max. position
-
MIC
-65 dBu (435 μV)
LINE (mono)
-45 dBu (4.35 mV)
LINE (stereo)
-27 dBu (34.6 mV)
CD (stereo)
-27 dBu (34.6 mV)
All other outputs (impedance balanced)
-
MIC inputs, GAIN at min. position
+11 dBu
Mono line inputs, GAIN at min. position
+30 dBu
Stereo line inputs
+26 dBu
PHONES output
+21 dBu
MASTER A, B, AUX outputs
+11 dBu
Input impedances
-
MIC
2 kΩ
CD
10 kΩ
All other inputs
> 15 kΩ
Output impedances
-
PHONES
47 Ω
All other outputs (impedance balanced)
150 Ω
MASTER VOLUME down
-129 dBu
Noise, channel inputs to MASTER A L/R outputs, MBW = 22 kHz, Aweighted
-
MASTER VOLUME down
-99 dBu
MASTER VOLUME center, all channel volume down
-90 dBu
MASTER VOLUME center, all channel volume center
-85 dBu
Signal-to-noise ratio, power amplifier, A-weighted, 450 W, 4 Ω
104 dB
Output stage topology, amplifier
Class D
Equalization
-
Low shelving filter
±15 dB / 60 Hz
Mid peak filter
±12 dB / 2.4 kHz
High shelving filter
±15 dB / 12 kHz
Master EQ 7-band (63, 160, 400, 1k, 2.5k, 6k, 12k Hz)
±10 dB / Q = 1.5
Filter
-
Low-cut filter, microphone processing (switchable)
80 Hz, 18 dB/oct. or 150 Hz, 12 dB/oct.
Low-cut filter, amplifier (engaged in Direct Drive mode)
50 Hz or 70 Hz, 18 dB/oct.
Speaker processing
LPN, switchable
Delay MASTER B, selectable
0–145 ms (0–50 m)
Effects
-
Type
Stereo 24/48-bit multi effects processor
Effect presets
32 factory presets, user editable
Remote control
Footswitch
Display
128 x 64 pixels, LCD
Audio player (USB at front panel)
-
Switching mode power supply (μC controlled)
FAT 32
Supported audio file formats
MP3, WAV
Interface
USB2.0, female type A
USB power supply, max. rated current (short circuit proof)
5 V, 500 mA
Digital audio interface (USB at rear panel)
-
Channels
2 in, 2 out
AD/DA conversion
16-bit, delta-sigma
Sampling rate
32/44.1/48 kHz
PC interface
USB2.0, female type B
Protection
-
MASTER A, B, AUX outputs
Adjustable peak limiters, -10 – +11 dBu
Amplifier
Audio limiters, high temperature, DC, HF, short circuit, peak current limiters, turn-on delay, back EMF
Switching mode power supply (μC controlled)
Inrush current limiters, mains over/undervoltage, mains over current, high temperature
Cooling
Continuous speed controlled fan
Phantom power, switchable
48 V DC
AC power input
100–240 V AC, 50–60 Hz
Power consumption, at 1/8 maximum output power, 4 Ω
180 W
Safety class
I
Operating temperature
5° to 40° C (40° to 105° F)
Product dimensions (Width x Height x Depth)
395 x 244 x 241 mm Rack-mount: 483 x 223 x 310.3 mm (7 HU)
Net weight
4.9 kg
Shipping weight
6.4 kg