| Content |
Technical Data
RF frequency range 518 ..... 866 MHz
Transmission/receiving frequencies 1440
Presets 4
Switching bandwidth 36 MHz
Peak deviation +/- 48 kHz
Compander HDX
Frequency response (microphone) 40.....18000 Hz
Signal-to-noise ratio > 110 dB(A)
THD, total harmonic distortion
In compliance with ETS 300422 , ETS 300445 , CE , FCC
Antenna connector 2 BNC, 50 Ohm
Audio-XLR connector 6,3 mm
Audio output level (balanced) XLR: +18 dBu max
Audio output level (unbalanced) Jack: +10 dBu max
Power supply 10,5 - 16 V DC battery AA (Mignon)
Dimensions (Receiver) 212 x 145 x 38 mm
Weight (Receiver) 1100 g
RF output power 30 mW
Power supply 2x 1.5 V battery AA (Mignon)
Operating time (transmitter) >8 h
Dimensions (Transmitter) d= 50 mm, l= 225 mm
Weight (Transmitter) 450 g
Transducer; Microphone type dynamic
AF sensitivity 1 mV/Pa
Sound pressure level (SPL) 154 dB(SPL) max.
Pick-up pattern super-cardioid
| The WMS40 mini2 Sets ensure brilliant sound and ease of use at an unbeatable price/performance ratio.
Unique HDAP (High Definition Audio Performance) technology ensures the best possible, most realistic
sound at any time.
The SR40 mini2 receiver provides three status LEDs each for channels 1 and 2, indicating ON/OFF
status, received signal strength (RF OK), and audio clipping (AF CLIP). The VOLUME control sets the
level at the ¼" output jack. Each receiver comes with a universal 12-V switched mode power supply with
EU, UK, and US adapters. The illuminated ON/OFF button switches both channels on and off
simultaneously.
The PT40 mini bodypack is probably the smallest and lightest transmitter in its class. A reliable mini XLR
input allows you to connect every compatible AKG miniature microphone.
The rugged HT40 mini handheld transmitter features an ON/OFF/MUTE switch and a sturdy wire-mesh
cap protecting the cardioid dynamic microphone element. Battery life is the same legendary 30 hours off
a single AA battery as for the standard WMS40 models, reducing the need to replace batteries and thus
saving real money in the long run. Consumer Alert (for US users)
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: The system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change.
KEY SPECIFICATIONS
Carrier frequency range 660 to 865 MHz
Modulation FM
Audio bandwidth 40 to 20,000 Hz
Frequency stability (-10°C to +50°C) ±15 kHz
T.H.D. at 1 kHz typ. 0.8%
Compander integrated
Signal/noise ratio typ. 105 dB(A)
RF output typ. Max. 10 mW
Power requirement single 1.5-V AA size battery
Battery life >30 hours |
With LDs' WS100-X it is simple to use at least 8 systems simultaneously without interferences. All systems transmit in the frequency range of 838 - 865 MHz. According to the order 91/2005 of the German federal network agency, these frequencies have been approved for professional uses �" without additional charges or a registration in Germany. Otherwise the systems are identical to the common WS100 systems working at a frequency range of 790,850 MHz - 813,800 MHz. For the use of more than 4 systems we always recommend our WS100AD antenna splitter and our WS100DA directional antennas.
- Handheld with high-quality dynamic capsule
- Convenient handling and channel setting via ASC infrared frequency scanning
- LCD display of channel, group and battery status
- 2 AA batteries for up to 14 hours of operation
Technical Specifications:
LDWS100MDX:
| Frequency Range: | 838 - 865 MHz | | No. of channels: | 160 (10 groups of 16 CHN | | Frequency Steadying: | 50 PPM (-10°C~50°C) | | RF Output Power: | 10 dBm | | Squrious Rejection: | > 55 dBc | | Modulate: | 30 kHz at Input Level = 25 mV | | Max Audio input level: | 0 dBV | | Dimensions: | 252 mm* 50 mm dia | | Weight: | 220 grams (without batteries) | | Power Requirements: | 2 "AA" size | | Battery Life: | up to 14 hours |
|
The Audio Technica 3000 Series wireless systems provide reliable, professional UHF technology for the most demanding of applications. The ATW-3171 is a frequency agile, true-diversity handheld wireless microphone system including the ATW-R310 receiver and ATW-T371 handheld Transmitter.
The ATW-R310 receiver features frequency adjustable UHF reception, allowing access of up to 200 user selectable channels. Diversity reception allows 2 build-in, independent receivers to relay on a single frequency for the strongest possible reception. The rear panel reveals both unbalanced 1/4" Phone and balanced XLR outputs. A comprehensive back-lit LCD display reveals channel and frequency settings, signal status and transmitter battery status. The receiver also features a ground lift switch, convenient in settings where bad power feeds result in ground hum and noise on the output stage.
The ATW-T371 handheld transmitter features an ATM710 cardioid condenser element. The cardioid polar pattern effectively minimizes noise and feed-back at the off-axis sections. The condenser element increases sensitivity and provides details, accurate audio reproduction.
Frequency Agile The system operates on UHF frequencies allowing greater channel selectability and range. The transmitter and receiver feature 200 user selectable channels. Diversity Reception The ATW-R310 receiver features dual internal receivers. The receivers relay between each-other, vying for the strongest reception while minimizing noise and signal drop-out. ATW-T371 Handheld Transmitter The handheld transmitter features a cardioid capsule which minimizes noise at the off-axis sections of the microphone.
| System |
|---|
| Type of System |
UHF Frequency Agile Handheld |
| RF Carrier Frequency Range |
Band D - 655.500 MHz - 680.375 MHz |
| Approx. Working Range |
300 feet |
| Overall Frequency Response |
70Hz to 15kHz |
| Signal-to-Noise Ratio |
110 dB at 35 kHz deviation (IEC-weighted), maximum modulation 75 kHz |
| # Of Channels |
200 Channels |
| # Of Simultaneous Systems |
6 |
| Receiver |
|---|
| Type of Receiver |
Dual independent receivers, automatic-switching diversity |
| Type of Outputs |
Unbalanced: 1/4" TS (“mono“) phone jack
Balanced: XLRM-type |
| Headphone Monitoring |
No |
| Power Requirements |
120V AC 60 Hz; 12-18V DC, 500 mA, center positive, with external supply |
| Battery Type/Approx. Life |
AC Powered Only |
| Display |
Back-Lit LCD Display & Battery / Signal Status LED |
| Mounting Options |
Table Surface / Rack Mountable rack ears included |
| Antenna Type |
Internal |
| Dimensions |
8.27 x 1.93 x 6.93" (210.0 x 49.0 x 176.0mm) (WxHxD) |
| Weight |
9.9 oz (280 grams) |
| Transmitter |
|---|
| Type of Transmitter |
Frequency Agile Handheld |
| Type of Input Connector |
not applicable |
| Type of Microphone |
ATM710 Condenser Element |
| Polar Pattern |
Cardioid |
| Interchangeable Mic Heads |
No |
| Battery Type/Approx. Life |
(2) 1.5v AA Alkaline not included |
| Mute Switch |
Power / Mute switch dual function |
| Level Control |
No |
| Antenna Type |
BNC Flexible UHF |
| Display |
Back-Lit LCD Display & Battery / Signal Status LED |
| Dimensions |
9.33 x 1.89" (237.0 x 1.89)(Length x Diameter) |
| Weight |
2.4 lbs (1.1 kg) |
| Packaging Info |
|---|
| Package Weight |
5.5 lb |
| Box Dimensions (LxWxH) |
15.0 x 13.25 x 3.75“ |
|
MicLink Wireless aims to take the complexity, frustration, and cost out of traditional wireless systems - creating a flexible, all-in-one solution that gets you up and running with the dynamic mic of your choice.
Main features
- Universal XLR transmitter converts any Lo-Z dynamic microphone into a wireless system
- Simple single-button pairing of transmitter/receiver; connects in seconds
- Enjoy up to 60 feet (18.3 m) of reliable connectivity and over 6 hours of battery life
- Lithium ion-powered transmitter conveniently recharges via USB
- Connect up to 5 wireless systems simultaneously
- Reliable 2.4 GHz spectrum; 14 Channels
- Compact receiver with 1/4' out and antenna; powered via battery (AAAx3) or included AC adapter
- Ideal for all but the largest sound environments: Small to medium stages, karaoke, public speaking, wedding, business presentations, and beyond
|
The frequency range extends from 790,850 MHz to 813,800 MHz (838,850 MHz to 861,800 MHz X-Version).
- Handheld with high-quality dynamic capsule
- Convenient handling and channel setting via ASC infrared frequency scanning
- LCD display of channel, group and battery status
- 2 AA batteries for up to 14 hours of operation
|
Reviews
There are no reviews yet.