Shure P2R – Q3Wireless Bodypack Receiver for PSM-200

Discontinued

90.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Shure P2R -Q3 Wireless Bodypack Receiver for PSM-200 FREQUENCY 748,000 – 784.000 MHz CH1: 749.100     CH5: 772.000 CH2: 754.025     CH6: 775.000 CH3: 756.000     CH7: 778.775 CH4: 765.900     CH8: 781.900 The P2R Hybrid Bodypack Receiver is the world’s first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. […]

 

Read more

Shure P2R -Q3 Wireless Bodypack Receiver for PSM-200

FREQUENCY 748,000 – 784.000 MHz

CH1: 749.100     CH5: 772.000

CH2: 754.025     CH6: 775.000

CH3: 756.000     CH7: 778.775

CH4: 765.900     CH8: 781.900

The P2R Hybrid Bodypack Receiver is the world’s first bodypack receiver to function as a
wired receiver, a wireless receiver, or both at the same time. This and other
unique features, along with excellent sound quality, make the P2R an exceptional value.

Key Features:

Can operate as a wired or wireless bodypack, or both simulaneously
Frequency locator
Built-in headphone limiter
Integrated cable management
High-impact plastic chassis
1/4″ Line inpit jack with high/low gain switch

Operating Controls:

Volume knob
Frequency select

LED Indicators:

Power
RF reception
Frequency
Limiter
Low Battery

RF Sensitivity
­109 dBm typical
Squelch Threshold
­102 dBm typical
Antenna
Attached Whip
Audio Input Connector
Connector Type: 1/4-inch Mono
Impedance: 1 megohm
Maximum Input Level: LO = +0 dBu; HI = ­10 dBu
Frequency Response: 30 Hz to 20 kHz (+/­3 dB); earphone dependent
Power Requirements
9 V alkaline battery, Duracell? type MN1604 recommended
Battery Life
Volume Dependent
Wired (RF Off): 6 hours
Wireless (RF On): 4 hours
Audio Output Connector
1/8 inch (3.5 mm)
Minimum Load Impedance
8 ohms
Net Weight
100 g (3.52 oz.), less battery
Overall Dimensions
122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)

Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “Shure P2R – Q3Wireless Bodypack Receiver for PSM-200”

Your email address will not be published. Required fields are marked *

Quick Comparison

Shure P2R - Q3Wireless Bodypack Receiver for PSM-200 removeSENNHEISER Receiver EK-2000-IEM-BW-X (626-698) Ear Monitor removeShure P9R Monitor System Receiver removeLD Systems LDMEI100G2BPR receiver for MEI100G2 IN-EAR Wireless In-Ear Monitoring system removeSENNHEISER EK-2020-D-II DIGITAL Tuner Tour removeLD Systems LDMEI1000G2BPR receiver for MEI1000G2 IN-EAR Wireless Monitoring system remove
NameShure P2R - Q3Wireless Bodypack Receiver for PSM-200 removeSENNHEISER Receiver EK-2000-IEM-BW-X (626-698) Ear Monitor removeShure P9R Monitor System Receiver removeLD Systems LDMEI100G2BPR receiver for MEI100G2 IN-EAR Wireless In-Ear Monitoring system removeSENNHEISER EK-2020-D-II DIGITAL Tuner Tour removeLD Systems LDMEI1000G2BPR receiver for MEI1000G2 IN-EAR Wireless Monitoring system remove
Image
SKUP2RH99SE00258P9RALDMEI100G2BPRH12SE00287LDMEI1000G2BPR
Rating
Price 90.00 incl. GR VAT 649.00 incl. GR VAT 659.00 incl. GR VAT 234.56 incl. GR VAT 439.00 incl. GR VAT 227.65 incl. GR VAT
Stock

Out of stock

Available on backorder

In stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityOut of stockAvailable on backorderIn stockAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentShure P2R -Q3 Wireless Bodypack Receiver for PSM-200 FREQUENCY 748,000 - 784.000 MHz CH1: 749.100     CH5: 772.000 CH2: 754.025     CH6: 775.000 CH3: 756.000     CH7: 778.775 CH4: 765.900     CH8: 781.900 The P2R Hybrid Bodypack Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. This and other unique features, along with excellent sound quality, make the P2R an exceptional value. Key Features: Can operate as a wired or wireless bodypack, or both simulaneously Frequency locator Built-in headphone limiter Integrated cable management High-impact plastic chassis 1/4" Line inpit jack with high/low gain switch Operating Controls: Volume knob Frequency select LED Indicators: Power RF reception Frequency Limiter Low Battery RF Sensitivity ­109 dBm typical Squelch Threshold ­102 dBm typical Antenna Attached Whip Audio Input Connector Connector Type: 1/4-inch Mono Impedance: 1 megohm Maximum Input Level: LO = +0 dBu; HI = ­10 dBu Frequency Response: 30 Hz to 20 kHz (+/­3 dB); earphone dependent Power Requirements 9 V alkaline battery, Duracell? type MN1604 recommended Battery Life Volume Dependent Wired (RF Off): 6 hours Wireless (RF On): 4 hours Audio Output Connector 1/8 inch (3.5 mm) Minimum Load Impedance 8 ohms Net Weight 100 g (3.52 oz.), less battery Overall Dimensions 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)

This wireless monitoring set's receiver uses adaptive-diversity technology. The earphone cable serves as a second antenna, which considerably reduces the number of drop-outs. Combined with IE 4 ear-canal phones for precise sound reproduction, EK 2000 IEM conveys an authentic acoustic pattern of live sound and allows you to monitor your own performance perfectly.



The P9R is a compact, stereo bodypack receiver for use with the PSM®900 Wireless Personal Monitor System. It offers premium features like RF Scan and Automatic Gain Control for unparalleled RF stability and channel availability, all packed in the thinnest form factor available. Patent-pending CueMode allows monitoring of different stage mixes and storing of up to 20 separate channels from one bodypack for quick and easy reference.

Features:

    Ultra-thin, low profile bodypack allows discreet placement on the performer
    Enhanced digital stereo encoder provides an expansive soundstage for excellent audio clarity and detail
    RF Scan: stand where the artist will be on stage and instantly check RF level
    Automatic Gain Control greatly prevents signal dropout due to RF overload and allows more channels to be used simultaneously
    Syncs to a P9T transmitter quickly and easily over IR link using Scan and Sync
    Switchable 10/50/100 mW output power provides a robust RF link in a variety of performance environments
    Separate, easily visible audio and RF status indicator LED's
    Audio level and battery life metering
    Selectable high-frequency EQ boost (+3/+6 dB @ 10 kHz)
    Volume and balance controls
    Extruded aluminum construction for rugged dependability

Specifications:

    Front-End RF Filtering: –3 dB point 30.5 MHz from center frequency
    Active RF Gain Control: 31 dB (adjusts RF sensitivity to provide more RF dynamic range)
    RF Sensitivity (20 dB SINAD): 2.2 µV
    Squelch Threshold (±3 dB SINAD): 22 dB SINAD
    Adjacent Channel Rejection: >70 dB
    Intermodulation Attenuation: >70 dB
    Blocking: >80 dB
    Image Rejection: >100 dB
    Audio Output Power (1kHz @

User's Manual

LD Systems MEI100G2

The LD Systems MEI 100 G2 is an advanced 96 channel UHF in-ear monitoring system delivering outstanding sound with extended dynamics in both the 823 - 832 and 863 - 865 MHz bands.

Switchable mono and stereo modes select the perfect monitoring setting for live music, theatre and voice applications while an input limiter has been integrated for consistent, distortion-free sound reproduction from 80Hz - 15 kHz with a high S/N ratio and low THD. The LD MEI 100 G2 allows the use of up to 5 systems simultaneously.

 

* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis


  • Product type: Belt pack receiver
  • Radio frequency range: 823 - 832 and 863 - 865 MHz
  • Channels: 96 (8 groups of 12 channels)
  • Transmission method: FM, stereo
  • Frequency response: 80 Hz - 15 kHz ± 3 dB
  • Audio outputs: 3.5 mm jack
  • Max. audio output level: 100 mW
  • Controls: Up, Down, Set, Volume
  • Indicators: LC display, RF (LED)
  • Power supply: 2 x 1.5 V AA
  • Operating time: > 10 hrs.
  • Width: 65 mm
  • Height: 95 mm
  • Depth: 25 mm

 

Round off your Sennheiser Tourguide System with the EK 2020-D receiver. Whether conferences, guided tours or hearing assistance: this extremely sturdy and versatile bodypack receiver provides excellent audio and ease of use for your guests. The EK 2020-D can be used with headphones or an induction neckloop for transmitting the sound to hearing aids equipped with a T coil. Digital transmission ensures optimum reception quality, with a range of up to 100 metres outdoors and around 50 metres indoors. The backlit receiver display shows all settings at a glance. Of course, the bodypack receiver can be used in mixed systems with stethoset receivers.

EK 2020-D: just right for everyone. All your guests need to do is connect their headphones or induction neckloop to the receiver. That's it! The receiver can conveniently be clipped to the shirt pocket or worn on a lanyard. When no signal is received, or when the headphones or neckloop are disconnected, the receiver will automatically switch off to save battery life. The operating time is up to 16 hours.

Features
  • Digital RF signal transmission

  • Intuitive operating concept

  • 16 hours battery life

  • Free choice of headphones or induction loop

  • Backlit LC display

  • Sturdy housing

Battery disposal information [77,1 KB] LD Systems MEI1000G2 The LD Systems MEI 1000 G2 is an advanced LICENSE FREE* 96 channel UHF in-ear monitoring system delivering natural sound with extended dynamics and low crosstalk in both the 823 - 832 and 863 - 865 MHz bands. Switchable mono, stereo and focus modes select the perfect monitoring applications while adjustable EQ and limiter functions have been integrated for consistent sound reproduction from 60Hz - 16 kHz with a high S/N ratio and low THD. The LD MEI 1000 G2 allows the use of up to 5 systems simultaneously. * license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis
  • Model name: LDMEI1000G2BPR
  • Product type: Belt pack receiver
  • Radio frequency range: 823 - 832 and 863 - 865 MHz
  • Channels: 96 (8 groups of 12 channels)
  • Transmission method: FM, stereo
  • Frequency response: 60 Hz - 16 kHz
  • S/N ratio: 80 dB
  • THD:
  • Audio outputs: 3.5 mm jack
  • Max. audio output level: 100 mW
  • Controls: Up, Down, Escape, Set, Volume
  • Indicators: LC Display, Low Battery, Power
  • Power supply: 2 x 1.5 V AA
  • Operating time: > 13 hrs., battery-dependent
  • Width: 65 mm
  • Height: 90 mm
  • Depth: 24 mm
Weight0.10 kg0.50 kg0.35 kg0.33 kg0.50 kg0.33 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.50 kg
Weight 0.35 kg
Weight 0.33 kg
Weight 0.50 kg
Weight 0.33 kg