Shure P2R – Q3Wireless Bodypack Receiver for PSM-200

Discontinued

90.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Shure P2R -Q3 Wireless Bodypack Receiver for PSM-200 FREQUENCY 748,000 – 784.000 MHz CH1: 749.100     CH5: 772.000 CH2: 754.025     CH6: 775.000 CH3: 756.000     CH7: 778.775 CH4: 765.900     CH8: 781.900 The P2R Hybrid Bodypack Receiver is the world’s first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. […]

 

Read more

Shure P2R -Q3 Wireless Bodypack Receiver for PSM-200

FREQUENCY 748,000 – 784.000 MHz

CH1: 749.100     CH5: 772.000

CH2: 754.025     CH6: 775.000

CH3: 756.000     CH7: 778.775

CH4: 765.900     CH8: 781.900

The P2R Hybrid Bodypack Receiver is the world’s first bodypack receiver to function as a
wired receiver, a wireless receiver, or both at the same time. This and other
unique features, along with excellent sound quality, make the P2R an exceptional value.

Key Features:

Can operate as a wired or wireless bodypack, or both simulaneously
Frequency locator
Built-in headphone limiter
Integrated cable management
High-impact plastic chassis
1/4″ Line inpit jack with high/low gain switch

Operating Controls:

Volume knob
Frequency select

LED Indicators:

Power
RF reception
Frequency
Limiter
Low Battery

RF Sensitivity
­109 dBm typical
Squelch Threshold
­102 dBm typical
Antenna
Attached Whip
Audio Input Connector
Connector Type: 1/4-inch Mono
Impedance: 1 megohm
Maximum Input Level: LO = +0 dBu; HI = ­10 dBu
Frequency Response: 30 Hz to 20 kHz (+/­3 dB); earphone dependent
Power Requirements
9 V alkaline battery, Duracell? type MN1604 recommended
Battery Life
Volume Dependent
Wired (RF Off): 6 hours
Wireless (RF On): 4 hours
Audio Output Connector
1/8 inch (3.5 mm)
Minimum Load Impedance
8 ohms
Net Weight
100 g (3.52 oz.), less battery
Overall Dimensions
122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)

Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “Shure P2R – Q3Wireless Bodypack Receiver for PSM-200”

Your email address will not be published. Required fields are marked *

Quick Comparison

Shure P2R - Q3Wireless Bodypack Receiver for PSM-200 removeSENNHEISER EK-2020-D-II DIGITAL Tuner Tour removeLD Systems LDMEI1000G2BPR receiver for MEI1000G2 IN-EAR Wireless Monitoring system removeAudio Technica M3R Stereo receiver for M3 in-ear monitor system removeSENNHEISER Receiver EK-2000-BW-X removeSENNHEISER Receiver EK-2000-IEM-BW-X (626-698) Ear Monitor remove
NameShure P2R - Q3Wireless Bodypack Receiver for PSM-200 removeSENNHEISER EK-2020-D-II DIGITAL Tuner Tour removeLD Systems LDMEI1000G2BPR receiver for MEI1000G2 IN-EAR Wireless Monitoring system removeAudio Technica M3R Stereo receiver for M3 in-ear monitor system removeSENNHEISER Receiver EK-2000-BW-X removeSENNHEISER Receiver EK-2000-IEM-BW-X (626-698) Ear Monitor remove
Image
SKUP2RH12SE00287LDMEI1000G2BPRM3RH99SE00248H99SE00258
Rating
Price 90.00 incl. GR VAT 439.00 incl. GR VAT 227.65 incl. GR VAT 543.00 incl. GR VAT 969.00 incl. GR VAT 649.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentShure P2R -Q3 Wireless Bodypack Receiver for PSM-200 FREQUENCY 748,000 - 784.000 MHz CH1: 749.100     CH5: 772.000 CH2: 754.025     CH6: 775.000 CH3: 756.000     CH7: 778.775 CH4: 765.900     CH8: 781.900 The P2R Hybrid Bodypack Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. This and other unique features, along with excellent sound quality, make the P2R an exceptional value. Key Features: Can operate as a wired or wireless bodypack, or both simulaneously Frequency locator Built-in headphone limiter Integrated cable management High-impact plastic chassis 1/4" Line inpit jack with high/low gain switch Operating Controls: Volume knob Frequency select LED Indicators: Power RF reception Frequency Limiter Low Battery RF Sensitivity ­109 dBm typical Squelch Threshold ­102 dBm typical Antenna Attached Whip Audio Input Connector Connector Type: 1/4-inch Mono Impedance: 1 megohm Maximum Input Level: LO = +0 dBu; HI = ­10 dBu Frequency Response: 30 Hz to 20 kHz (+/­3 dB); earphone dependent Power Requirements 9 V alkaline battery, Duracell? type MN1604 recommended Battery Life Volume Dependent Wired (RF Off): 6 hours Wireless (RF On): 4 hours Audio Output Connector 1/8 inch (3.5 mm) Minimum Load Impedance 8 ohms Net Weight 100 g (3.52 oz.), less battery Overall Dimensions 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)

Round off your Sennheiser Tourguide System with the EK 2020-D receiver. Whether conferences, guided tours or hearing assistance: this extremely sturdy and versatile bodypack receiver provides excellent audio and ease of use for your guests. The EK 2020-D can be used with headphones or an induction neckloop for transmitting the sound to hearing aids equipped with a T coil. Digital transmission ensures optimum reception quality, with a range of up to 100 metres outdoors and around 50 metres indoors. The backlit receiver display shows all settings at a glance. Of course, the bodypack receiver can be used in mixed systems with stethoset receivers.

EK 2020-D: just right for everyone. All your guests need to do is connect their headphones or induction neckloop to the receiver. That's it! The receiver can conveniently be clipped to the shirt pocket or worn on a lanyard. When no signal is received, or when the headphones or neckloop are disconnected, the receiver will automatically switch off to save battery life. The operating time is up to 16 hours.

Features
  • Digital RF signal transmission

  • Intuitive operating concept

  • 16 hours battery life

  • Free choice of headphones or induction loop

  • Backlit LC display

  • Sturdy housing

Battery disposal information [77,1 KB] LD Systems MEI1000G2 The LD Systems MEI 1000 G2 is an advanced LICENSE FREE* 96 channel UHF in-ear monitoring system delivering natural sound with extended dynamics and low crosstalk in both the 823 - 832 and 863 - 865 MHz bands. Switchable mono, stereo and focus modes select the perfect monitoring applications while adjustable EQ and limiter functions have been integrated for consistent sound reproduction from 60Hz - 16 kHz with a high S/N ratio and low THD. The LD MEI 1000 G2 allows the use of up to 5 systems simultaneously. * license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis
  • Model name: LDMEI1000G2BPR
  • Product type: Belt pack receiver
  • Radio frequency range: 823 - 832 and 863 - 865 MHz
  • Channels: 96 (8 groups of 12 channels)
  • Transmission method: FM, stereo
  • Frequency response: 60 Hz - 16 kHz
  • S/N ratio: 80 dB
  • THD:
  • Audio outputs: 3.5 mm jack
  • Max. audio output level: 100 mW
  • Controls: Up, Down, Escape, Set, Volume
  • Indicators: LC Display, Low Battery, Power
  • Power supply: 2 x 1.5 V AA
  • Operating time: > 13 hrs., battery-dependent
  • Width: 65 mm
  • Height: 90 mm
  • Depth: 24 mm

The M3R belt pack receiver is part of the M3 system. Rugged, ergonomic compensate housing includes a field-replaceable flexible-whip antennas. Digital LCD display with soft touch controls. The stereo monitor system offers Personal Mix Control, which gives each musician volume and mix control of two independent signals on stage, via easy-to-use controls on the M2R stereo body-pack receiver. Any number of M2R stereo receivers may be used on the same frequency with a single M2T stereo transmitter. On board 3 level limiter (defeatable) helps protect your hearing from sudden peaks. Includes Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation with 3 sizes of rubber eartips plus an ear-conforming foam tip. Also, an auxiliary input offers a connection point for an ambient microphone, click track, or other mic- or line-level input.

These rugged systems are built to stand up to the inevitable bumps of life on the road, delivering clear, natural sound for touring and installed-sound uses.

 

  • Receiving System: Double conversion superheterodyne
  • RF Sensitivity: 20 dBuV (at 60 dB S/N ratio, 50 ohms termination)
  • Headphone Output Connector: 3.5 mm TRS stereo phone jack
  • Headphones Output Power: 65 mW (at 32 ohms)
  • Antenna Input: SMA-type, 50 ohms
  • Aux. Input Connector: 3.5 mm TRS stereo phone jack
  • Batteries: 2 x 1.5V AA (not included)
  • Battery Life: 8 hours (alkaline) Depending on battery type and use pattern
  • Dimensions: 70.0 mm (2.76“) W x 25.0 mm (0.98“) D x 110.0 mm (4.33“) H
  • Net Weight: 133 g (4.7 oz), without batteries
  • Accessories Included: EP3 earphone; flexible antenna

 

It is nice when you can concentrate fully on the picture because you know the sound is reliable. This camera receiver allows you to do just that. Equipped with adaptive diversity, the camera receiver ensures reliable reception. Five frequency ranges with up to 75 MHz switching bandwidth also provide optimum flexibility for components of the 2000 series. The transmitter settings can be synchronized quickly from EK 2000 using infrared technology.

This wireless monitoring set's receiver uses adaptive-diversity technology. The earphone cable serves as a second antenna, which considerably reduces the number of drop-outs. Combined with IE 4 ear-canal phones for precise sound reproduction, EK 2000 IEM conveys an authentic acoustic pattern of live sound and allows you to monitor your own performance perfectly.

Weight0.10 kg0.50 kg0.33 kg0.20 kg0.50 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.10 kg
Weight 0.50 kg
Weight 0.33 kg
Weight 0.20 kg
Weight 0.50 kg
Weight 0.50 kg