Shure WL93 & WL93T Lavalier Omni Condenser Microphone

198.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: WL93 & WL93T Category:
Subminiature lavalier design; ideal size for theater, television, broadcasting, video, film, and sound reinforcement Small, inconspicuous mounting hardware Full, clear sound comparable to larger microphones Smooth extended frequency response with presence rise specially tailored for chest-worn microphone operation Controlled low-frequency rolloff reduces low-frequency clothing and room noise Low distortion, wide dynamic range Uniform omnidirectional polar […]

 

Read more

Subminiature lavalier design; ideal size for theater, television, broadcasting, video, film, and sound reinforcement
Small, inconspicuous mounting hardware
Full, clear sound comparable to larger microphones
Smooth extended frequency response with presence rise specially tailored for chest-worn microphone operation
Controlled low-frequency rolloff reduces low-frequency clothing and room noise

Low distortion, wide dynamic range
Uniform omnidirectional polar pattern
Preamplifier assembly (SM93) can be pocketed, strapped to the body, or clipped to belt or waistband
Wide-range phantom powering (SM93) accepts all commonly used voltages

Type
Condenser (electret bias)
Frequency Response
50 to 20,000 Hz
Response Curve Image Small SM93 WL93 View Larger
Polar Pattern
Omnidirectional, uniform with frequency
Output Impedance
3000 ohms
Output Level (1 Pascal = 94 dB SPL)
Open Circuit Voltage: -38 dBV/Pa (13 mV)
Output Clipping Level (at 1,000 Hz)
0.25 V at 120 dB
Total Harmonic Distortion
Less than 1% at 120 dB
Maximum SPL
120 dB
Dynamic Range (maximum SPL to A-weighted noise level)
102 dB
Output Noise (equivalent SPL)
18 dB typical, A-weighted
Signal-to-Noise Ratio
76 dB at 94 dB SPL (IEC 651)

Polarity
Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground)*
*Produces positive voltage at pin 2 of Shure wireless receiver three-pin connector
Recommended Operating Voltage
2 to 10 V; 5 V nominal (pin 2 to pins 3 and 4)
Current Drain
40 microA typical
Environmental Conditions
Operating Temperatures: -18 to 57 degrees C (0 to 135 degrees F)
Storage Temperatures: -29 to 74 degrees C (-20 to 165 degrees F)
Cable
Black 1.27 m (4.17 ft), attached, two-conductor, shielded, terminated by miniature connector type TA4F (WL93T: Tan 1.27 m [4.17 ft])
Case
Microphone: Black ABS thermoplastic case with stainless-steel-mesh grille
Net Weight
Microphone: 16 g (0.57 oz)

Weight 0.20 kg

Reviews

There are no reviews yet.

Be the first to review “Shure WL93 & WL93T Lavalier Omni Condenser Microphone”

Your email address will not be published. Required fields are marked *

Quick Comparison

Shure WL93 & WL93T Lavalier Omni Condenser Microphone removeRODE Smart Lav+ Lavalier microphone for smartphones removeSENNHEISER ME-4 pick-up pattern cardioid removeMIPRO MU-55LS Omni-Directional Lavalier Microphone removeAKG CK 99L CONDENSER CLIP-ON MICROPHONR removeMIPRO MU-53L Uni-Directional Lavalier Microphone remove
NameShure WL93 & WL93T Lavalier Omni Condenser Microphone removeRODE Smart Lav+ Lavalier microphone for smartphones removeSENNHEISER ME-4 pick-up pattern cardioid removeMIPRO MU-55LS Omni-Directional Lavalier Microphone removeAKG CK 99L CONDENSER CLIP-ON MICROPHONR removeMIPRO MU-53L Uni-Directional Lavalier Microphone remove
Image
SKUWL93 & WL93TH11RD00044H19SE00051MIP00246CK 99LMIP00243
Rating
Price 198.00 incl. GR VAT 65.00 incl. GR VAT 119.00 incl. GR VAT 101.00 incl. GR VAT 99.00 incl. GR VAT 101.00 incl. GR VAT
Stock

Available on backorder

In stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityAvailable on backorderIn stockAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentSubminiature lavalier design; ideal size for theater, television, broadcasting, video, film, and sound reinforcement Small, inconspicuous mounting hardware Full, clear sound comparable to larger microphones Smooth extended frequency response with presence rise specially tailored for chest-worn microphone operation Controlled low-frequency rolloff reduces low-frequency clothing and room noise Low distortion, wide dynamic range Uniform omnidirectional polar pattern Preamplifier assembly (SM93) can be pocketed, strapped to the body, or clipped to belt or waistband Wide-range phantom powering (SM93) accepts all commonly used voltages Type Condenser (electret bias) Frequency Response 50 to 20,000 Hz Response Curve Image Small SM93 WL93 View Larger Polar Pattern Omnidirectional, uniform with frequency Output Impedance 3000 ohms Output Level (1 Pascal = 94 dB SPL) Open Circuit Voltage: -38 dBV/Pa (13 mV) Output Clipping Level (at 1,000 Hz) 0.25 V at 120 dB Total Harmonic Distortion Less than 1% at 120 dB Maximum SPL 120 dB Dynamic Range (maximum SPL to A-weighted noise level) 102 dB Output Noise (equivalent SPL) 18 dB typical, A-weighted Signal-to-Noise Ratio 76 dB at 94 dB SPL (IEC 651) Polarity Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground)* *Produces positive voltage at pin 2 of Shure wireless receiver three-pin connector Recommended Operating Voltage 2 to 10 V; 5 V nominal (pin 2 to pins 3 and 4) Current Drain 40 microA typical Environmental Conditions Operating Temperatures: -18 to 57 degrees C (0 to 135 degrees F) Storage Temperatures: -29 to 74 degrees C (-20 to 165 degrees F) Cable Black 1.27 m (4.17 ft), attached, two-conductor, shielded, terminated by miniature connector type TA4F (WL93T: Tan 1.27 m [4.17 ft]) Case Microphone: Black ABS thermoplastic case with stainless-steel-mesh grille Net Weight Microphone: 16 g (0.57 oz)

The smartLav+ is a broadcast-grade wearable microphone designed for use in a wide range of film, television and broadcast scenarios, or wherever broadcast quality audio is required in a discreet, portable format without the complication and expense of additional wireless equipment.

With the smartLav+ the user simply mounts the microphone on the talent, connects it to a smartphone or tablet headset jack and records via the RØDE Rec app for iOS, or any other audio app of their choice.

By employing a professional quality omni-directional condenser capsule the smartLav+ picks up sound equally from all around the microphone, allowing for versatility when mounting and ensuring a high degree of user-friendly operation.

A foam pop shield is supplied to minimise wind noise and vocal plosives (hard ʽbʼ, ʽtʼ and ʽpʼ sounds), as well as a durable mounting clip with in-built cable management. Its Kevlar® reinforced cable ensures that you never stretch or snap your microphone under normal usage conditions.

The smartLav+ is compatible with any audio app that accepts input from the headset connection, however it has been designed to pair perfectly with RØDEʼs RØDE Rec app for Apple iOS devices. RØDE Rec turns the userʼs iOS device into a fully-featured field recorder, with a wide range of equalisation presets to suit various recording situations, in addition to professional editing functions and the ability to publish to SoundCloud and Dropbox direct from the app.

 

Acoustic Principle    Pressure Gradient
Active Electronics    JFET
Capsule    0.10“
Polar Pattern     [Omnidirectional - picks up all sides equally]
Address Type    End
Frequency Range    20Hz - 20kHz (selected HPF @ 0)
Output Impedance    0Ω
Maximum SPL    110dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level    189.0dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity    -35.0dB re 1 Volt/Pascal (17.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted)    27dB-A
Weight     6.00gm
Dimensions    1180.00mmH x 4.50mmW x 4.50mmD
Dimensions    1180.00mmH x 4.50mmW x 4.50mmD
Output     TRRS Output
Warranty     1 year

 


 

Cardioid Electret-Condenser Lavalier Lapel Mic The Sennheiser ME 4 Cardioid lavalier (lapel) microphone is for use with the Soundfield SK 100 G3 body pack transmitter. The Sennheiser ME 4 cardioid electret-condenser lavalier mic comes with cable, clip and grille.   Sennheiser ME4 Cardioid Electret-Condenser Lavalier Lapel Mic Features at a Glance: Cardioid pickup patter for excellent off-axis sound rejection - great live! Compatible with the Sennheiser SK 100 G3 Wireless Bodypack Locking 1/8" (3.5mm) connecter won't accidentally come unplugged Includes cable clip and protective grille Black
  • Miniature MU-55 is inconspicuous, lightweight and waterproof.
  • Supplied with 4-pin mini XLR and fits all MIPRO bodypack transmitters.
  • Featuring a smooth, warm, natural sound.
  • Available in black or beige colors.
  • Ideal for theater, houses of worship and educational applications.
   
  Capsule Module 4.5 mm Ø omni-directional condenser microphone  
  Frequency Response 40 Hz~20 kHz  
  Sensitivity -49±3 dBV/Pa (0dB=1V/Pa)  
  Max. SPL 135 dB (Typical,1%THD)  
  Plug 4-pin mini XLR or TA4F  
  Color Black or Beige  
  Cable Length 150 cm / 59 "  
  Weight Approx. 14 g / 0.5 oz  
  Note Refer to actual product in the event of product description discrepancy.
 

Low-profile, cost efficient clip-on microphone for applications including houses of worship, lecturers, etc. Connects to AKG bodypack transmitters.

The CK 99 L provides a natural sound, with a slight rise above 10 kHz for added clarity. Its cardioid polar pattern and bass rolloff combine to suppress unwanted ambient noise.

ck99l_akg_ck_99l_lavalier_speak Hide and speak for house-of-worship, conference and theater applications The CK99 L is a condenser lavalier microphone with cardioid polar pattern. It provides a natural sound, with a slight rise above 10kHz for added clarity, perfect for applications in houses of worship, lectures and theaters.

Thanks to its small housing and the included durable metal clip, it can be inconspicuously and securely mounted on jackets and costumes. The CK99 L provides a professional three-pin mini XLR connector that fits the body pack transmitters of all AKG wireless microphone systems.

Cardioid polar pattern
eliminates noise from the rear

125° pickup angle
for inexperienced or very vivacious talkers

Small housing and durable metal clip
for inconspicuous, secure mounting

Technical Specification
General
Audio Frequency bandwidth 15 to 18000 Hz
Sensitivity 8.8 mV/Pa
Equivalent Noise Level 34 dB-A
Signal to Noise 60 dB-A
Electrical Impedance 200 Ohms
Recommended Load Impedance 2000 Ohms
Polar Patterns
Cardioid
Powering Interface
Voltage 1.5 to 10 V
Current 2 mA
Audio Output
Type Mini XLR
Gender Female
Contacts 3-pin
Design
Finish matte black
Dimensions / Weight
Height 23 mm
Diameter 8 mm
Net Weight 2.5 g
  • MU-53 features high dynamic range characteristics and sustains up to 142 dB SPL with 1% T.H.D.
  • Supplied with 4-pin mini XLR and fits all MIPRO bodypack transmitters.
  • Featuring a smooth, warm, natural sound.
  • Available in black or beige colors.
  • Ideal for theater, houses of worship and educational applications.
   

Capsule Module 10 mm Ø uni-directional condenser microphone  
  Frequency Response 50 Hz~18 kHz  
  Sensitivity -46±3 dBV/Pa (0dB=1V/Pa)  
  Max. SPL 142 dB (Typical,1%THD)  
  Plug 4-pin mini XLR or TA4F  
  Color Black or Beige  
  Cable Length 150 cm / 59 "  
  Weight Approx. 19 g / 0.7 oz  
  Note Refer to actual product in the event of product description discrepancy.
 
Weight0.20 kg0.50 kg0.50 kg0.20 kg0.50 kg0.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.20 kg
Weight 0.50 kg
Weight 0.50 kg
Weight 0.20 kg
Weight 0.50 kg
Weight 0.30 kg