Content |
The JBL JRX125 is a dual 15? speaker system, which has become one of the most popular configurations with DJs and musicians who are looking for more low-frequency performance while maintaining the simplicity of a single-box system. The JRX125 is actually a ?quasi three-way? design. This means that the upper woofer covers lows and mids. The bottom woofer uses a lower crossover frequency and covers only lows, acting as a built-in subwoofer. So you get the extra low-end of a dual 15? rig while maintaining the superior mid-frequency performance of a single driver system. Dimensions: 43.25 x 18.25 x 17“, 94 lbs (42.6 kg).
JBL designed the new JRX100 series for cost-conscious musicians, DJs and other users of live sound reinforcement speakers. All full-range models feature Neutrik? Speakon? and 1/4" input connectors. JRX100 cabinets are constructed of carpet-covered, 3/4" MDF - a material that is structurally and acoustically superior to the particleboard that is used by many competitive products. To minimize distortion, heavy gauge wire is used for inductors and SonicGuard? high-frequency driver protection guards against damage caused by inadvertent overpowering of the system. The JRX115 and JRX112M's innovative, new dual-angle pole socket allows them to be mounted in either a conventional, vertical position, or with a 10 degree down angle. By aiming the speaker down, you get more even audience coverage and reduce the destructive acoustic reflections from walls. JBL constructs the JRX enclosures with advanced adhesives and closely mechanically spaced fasteners, not just glue. They use non-resonant, all metal handles, and an 18-gauge, full metal grille. All JRX100 models have passed the same 100-hour, full rated-power torture test that JBL high-end touring systems must survive.
- System Type: Dual 15" 2-way, sound reinforcement speaker
- Frequency Range (-10 dB):2 35 Hz - 16 kHz
- Frequency Response (±3 dB):2 45 Hz - 12 kHz
- Sensitivity (1w/1m): 100 dB SPL
- Nominal Impedance: 4
- Peak Power Capacity: 2000 watts
- Maximum SPL: 133 dB
- Nominal Dispersion: 90° x 50°
- Crossover Frequency: 2 kHz
- Dimensions (H x W x D): 43 in x 18.3 in x 17 in
- High Frequency Driver: JBL 2412, 1" exit compression driver mounted on Progressive
- Transition™ Waveguide
- Low Frequency Driver: JBL M115-8A x 2
Input Connectors: Neutrik® Speakon® NL-4 (x1); ¼" TS phone jack (x1); parallel. - Enclosure Construction: 19 mm (¾ in) MDF (Medium Density Fiberboard); with glued and mechanically fastened joint detail; covered in black carpet.
- Grill: 18-gauge, powder-coated steel.
|
Ειδική έκδοση του AM 7315/95 για χρήση σε
εξωτερικό περιβάλλον και ακραίες καιρικές
συνθήκες με επιπλέον αναβάθμιση 14 σημειων.
Πιστοποίηση IP56 κατά πρότυπο IEC 529.
Παράδοση κατόπιν παραγγελίας.
Frequency Range : 38 Hz - 19 kHz (-10 dB)
Frequency Response : 45 Hz - 17 kHz ( ± 3 dB)
Coverage Pattern : 90°x 50°, rotatable waveguide
Directivity Factor (Q) : 10
Directivity Index (DI) : 10 dB
Crossover Modes : Tri-amp / Bi-amp switchable
Passive Crossover Slopes : MF/HF Section in Bi-amp mode: 4th order (24 dB/oct) Linkwitz-Riley HP & LP, 2.1 kHz
Transducer Power Rating (AES) : LF: 1000 W (4000 W peak), 2 hrs
600 W (2400 W peak), 100 hrs
MF: 350 W (1400 W peak), 100 hrs
HF: 75 W (300 W peak), 2hrs
Long-Term System Power Rating (IEC) : LF: 600 W (2400 W peak), 100 hrs
MF/HF: 350 W (1400 W peak), 100 hrs
Maximum SPL : LF: 125 dB-SPL cont avg
(131 dB peak)
Tri-amp mode:
MF: 133 dB-SPL cont avg
(139 dB peak)
HF: 132 dB-SPL cont avg
(138 dB peak)
Bi-amp mode:
MF/HF: 132 dB-SPL cont avg
(138 dB peak)
System Sensitivity of Passive Sections 6 : MF/HF Section in Bi-amp mode: 108 dB SPL (1W @ 1m)
|
Ειδική έκδοση του AM 7315/64 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
14 σημείων. Πιστοποίηση IP55 κατά πρότυπο IEC
529. Παράδοση κατόπιν παραγγελίας.
Ηχείο 3-Way Full-Range υψηλής ισχύος 1450W
κατασκευασμένο από πολύφυλλo ξύλο συμήδας
και επένδυση Duraflex. Απόκριση συχνοτήτων:
38 Hz - 20 kHz. Ευαισθησία: LF: 127dB-SPL cont
avg (133 dB peak) Tri-amp mode: MF: 133dBSPL
cont avg (139dB peak) HF: 135dB-SPL cont
avg (141dB peak) Bi-amp mode: MF/HF: 133dBSPL
cont avg (139dB peak) με woofer 15" 2265H
LF: 1000W (4000W peak), 2 hrs, 750 W (3000
W peak), 100 hrs JBL Differential Drive® διπλού
πηνίου 75mm (3-in). Driver μεσέων συχνοτή των
CMCD-82H 8" MF: 350 W (1400W peak), 2 hrs
με ενσωματωμένο περιστρεφόμενο κυματοδηγό
και 2432H driver υψηλών συχνοτήτων HF: 100
W (400 W peak), 2 hrs με στόμιο χοάνης 38mm
(1.5 in), πηνίο φωνής 75mm(3 in) και διασπορά
χοάνης. 60° x 40°. Δυνατοτητα διενίσχυσης/
τριενίσχυσης με διακόπτη. Διατίθεται και σε
λευκό χρώμα (-WH). Διαθέτει υποδοχές (13 x
M10) για eyebolts σε χρήση μόνιμων
εγκαταστάσεων (διατίθονται σαν option). Eπίσης
μπορεί να δεχτεί το Planar Array Frame kits PAF-
2K and PAF-3K για κρέμαση πολλαπλών ηχείων
(option). Χρήσεις: PA, θέατρα, Disco/Club,
Aμφιθέατρα, Αθλητικές Εγκαταστάσεις, θεματικά πάρκα κλπ.
Διαστάσεις ΥΠΒ 967 x 561 x 657 mm. Βάρος
45,8 κιλά.
|
Large (15“) diameter woofer in a compact, lightweight enclosure.
Compact dimensions made possible by mounting the high frequency driver array in a coaxial configuration with the woofer.
Available in black or white and 100V line models
Extended bass frequencies for rich music reproduction.
The world's smallest* enclosure size relative to the diameter of the woofer.
Easy to transport thanks to compact and light enclosures that other speakers of this class cannot offer.
Product Specifications - Enclosure: Sealed type
- Power Handling Capacity: Continuous pink noise: 100 W, Continuous program: 300 W
- Rated Impedance: 8 Ω
- Sensitivity: 98 dB (1 W, 1 m)
- Frequency Response: 70 - 20,000 Hz
- Crossover Frequency: 3 kHz
- Directivity Angle: Horizontal: 90゜, Vertical: 40゜
- Speaker Component: Low frequency: 38 cm (15) cone-type
- Input Terminal: NEUTRIK NL4MP Speakon and M4 screw terminal, distance between barriers: 9 mm (0.35)“
- Operating Temperature: -10℃ to +50℃ (14゜F to 122゜F)
- Finish: Enclosure: Polypropylene, White
- Punched net: Surface-treated steel plate, White
- Dimensions: 451 (W) × 560 (H) × 400 (D) mm (17.76 × 22.05" × 15.75“)“
- Weight: 12 kg (26.46 lb)
| The P3115-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.
The high-frequency section is a constant directivity CMD horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 15” woofer with a 2.5” voice coil. The P3115-T features a selectable line transformer for 70 - 100 Volt applications. P 3115-T meets the requirements of IP 55 code (International Protection Rating).
- Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
- Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
- Stainless steel bracket
- 15" high-output LF transducer with 2" voice coil
- RCF Precision Neo 1" Compression Driver with 1.5" voice coil
- 90° x 60° constant directivity horn
- 10° X 20° enclosure sides for array configurations
- Active Mosfet Compression Driver Protection
- 12 brass suspension points (M10)
- Line transformer
Acoustical Specifications
- Frequency Response -10 dB: 75 Hz ÷ 20 kHz
- Max SPL @ 1m: 129 dB
- Horizontal coverage angle: 90°
- Vertical coverage angle: 60°
- Directivity index; Q: 13.3
- System Sensitivity: 98 dB
- Nominal Impedance: 16 Ω
- Power Handling: 300 W
- Peak Power Handling: 1200 W
- Protections: dinamyc
- Crossover frequencies: 1300 Hz
Transducers
- Compression Driver: 1" HF driver, 1.5" voice coil
- Nominal Impedance: 8 Ω
- Input Power Rating: 25 W AES
- Sensitivity: 108 dB
- Woofer: 15" woofer, 2.5" voice coil
- Nominal Impedance: 16 Ω
- Input Power Rating: 250 W AES
- Sensitivity: 98 dB
Input Section
- Input connector: 4-adriges Neopren Kabel, 5m
- Constant voltage transformer: 70/100 V
- Power Selection: 70V/60W, 30W , 100V/120W, 60W
Cabinet
- Cabinet Material: Polyethylene rotomoulded
- Hardware: 12 x M10 inserts+ U-brackets and pair of spacers
- Grille: Custom perforated aluminium grillewith open-cell fiber and water repellent woven fabric backing
- Colour: grey
Physical Specifications
- Height: 463 / 18.22 mm/inch
- Width: 463 / 18.22 mm/inch
- Depth: 433 / 17.04 mm/inch
- Net Weight: 19.4 / 42.76 kg/lbs
|
Built with the same rugged, injection molded chassis as our Titan™ 12, the Titan™ 15 is using custom designed, heavy duty 15" low frequency driver with 2" titanium high frequency compression driver. The Titan™ 15 is at home indoors or outdoors, on stage, in studios, at rehearsals, theaters, houses of worship and just about anywhere that needs a higher standard of audio reproduction. Use the Titan™ 15 with the optional tripod floor stands, the unique dual-head array adapter, optional wall mount or even on its side as a floor monitor. The Titan 15 moisture proof woofer makes it the ideal choice for outdoor gigs and festival applications. No matter what the application, Titan™ 15 is up for the challenge.
|
SPECIFICATIONS
| MODEL | TITAN 15 PASSIVE | GENERAL INFO |
| System type | 15" 2-way passive | Frequency response +/- 3db | 50-18kHz | Sensitivity (db 1w@1m) | 97dB | System impedance | 8 ohms | Maximum SPL Peak dB | 129dB | POWER HANDLING (Watts) |
| Continuous RMS | 400 | Program | 800 | Peak | 1600 | LF DRIVER |
| Lf driver size mm / inches | 1x15“ | Lf voice coil size | 75mm/3“ | HF SECTION |
| Hf voice coil size | 51mm/2" | Hf type | Compression Driver | Hf diaphragm material | Titanium | Horn dispersion (H x V) | 90 x 60 | Hf exit size mm / inches | 25mm/1“ | Hf horn shape | EWG™ - Elliptical Waveguide | Hf peak indicator | Peak LED ring in horn throat | CROSSOVER SECTION | 2-way | Crossover Frequency / Filter | 1.8kHz / 12dB per oct. | Hf driver protection | DTF™ - Dynamic Thermal Filament (2 x SK3 Bulb) | PHYSICAL FEATURES |
| Finish | Black or White | Handle quantity | 2 carry handles (one on each side) | Suspension points | (10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMount® 60.0-type footprint | Stand adapter - BOTTOM | Pole-mount receptacle with lock screw, Optional wall-mount bracket | Enclosure type | Molded Polypropylene | Enclosure shape | Trapezoidal for vertical array and horizontal stage monitor applications | IN / OUT PANEL (speaker Level) |
| Input connector | 2 x 1/4" jacks and2 x Speakon™ | DIMENSIONS & WEIGHT |
| Height ( mm / ins ) | 708mm/27.9“ | Width Front / Rear / mm / ins | 477.8mm/18.8“ | Depth ( mm / ins ) | 401.77mm/15.8“ | Net weight ( kg / lbs ) | 22kg/48.4 lbs | Gross weight ( kg / lbs ) | 25kg/55 lbs | |
|
Reviews
There are no reviews yet.