B & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k

99.20 incl. GR VAT

Only 1 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
DE-16 Driver 60WRMS, 106dB, 2.5-20k 1″ high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 […]

 

Read more

DE-16 Driver 60WRMS, 106dB, 2.5-20k

1″ high frequency compression driver. Low mass mylar
diaphragm ensures a very flat frequency response and
optimized ceramic magnet assembly allows for high
sensitivity and low distortion up to 18 kHz.

Specifications1
Throat Diameter 25 mm (1 in)
Nominal Impedance 8 Ω
Minimum Impedance 7.8 Ω
Power Handling
(2200 –20000 Hz)
Nominal2 30 W
Continuous Program3 60 W
Sensitivity (1W/1m)4 107 dB
Frequency Range 1.5 – 18 kHz
Recommended Crossover5 2.2 kHz
Voice Coil Diameter 44 mm (1.7 in)
Winding Material Aluminium
Inductance 0.11 mH
Diaphragm Material Mylar
Flux Density 1.5 T

Mounting and Shipping Information
Two M6 holes 180° on 76 mm (3 in) diameter
Overall Diameter 102 mm (4 in)
Depth 58 mm (2.3 in)
Net Weight (1 unit) 1.6 kg (3.5 lb)
Shipping Weight (8 units) 13.9 kg (30.6 lb)
Shipping Box (8 units) 220x220x150 mm
(8.7×8.7×5.9 in)
1 Driver mounted on B&C ME 45 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 1000 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

Weight 1.70 kg

Reviews

There are no reviews yet.

Be the first to review “B & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k”

Your email address will not be published. Required fields are marked *

Quick Comparison

B & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-10 Driver 1" 20W, 107dB removeJBL COMPRESSION DRIVER 4' 150W 8Ω removeB & C Speakers DE-900TN Driver 2", 110W, 108.5dB, 0.5-18kHz removeB & C Speakers DE-500 Driver 1" 80W, 107dB removeJBL 2450H NEODYMIUM DRIVER 4' 150W 8Ω remove
NameB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-10 Driver 1" 20W, 107dB removeJBL COMPRESSION DRIVER 4' 150W 8Ω removeB & C Speakers DE-900TN Driver 2", 110W, 108.5dB, 0.5-18kHz removeB & C Speakers DE-500 Driver 1" 80W, 107dB removeJBL 2450H NEODYMIUM DRIVER 4' 150W 8Ω remove
Image
SKUDE-16DE-102446HDE-900TNDE-5002450H
Rating
Price 99.20 incl. GR VAT 52.45 incl. GR VAT 901.03 incl. GR VAT 552.00 incl. GR VAT 191.99 incl. GR VAT 1,465.00 incl. GR VAT
Stock

Only 1 left in stock (can be backordered)

In stock

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

Available on backorder

AvailabilityOnly 1 left in stock (can be backordered)In stockAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)Available on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description100 W continuous program power capacity 1' horn throat diameter 44 mm (1.7 in) aluminium voice coil Titanium diaphragm 1000 - 18000 Hz response 107 dB sensitivity Optimized Neodymium magnet assembly Shorting copper cap for extended HF response
ContentDE-16 Driver 60WRMS, 106dB, 2.5-20k 1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 Hz) Nominal2 30 W Continuous Program3 60 W Sensitivity (1W/1m)4 107 dB Frequency Range 1.5 – 18 kHz Recommended Crossover5 2.2 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Mylar Flux Density 1.5 T Mounting and Shipping Information Two M6 holes 180° on 76 mm (3 in) diameter Overall Diameter 102 mm (4 in) Depth 58 mm (2.3 in) Net Weight (1 unit) 1.6 kg (3.5 lb) Shipping Weight (8 units) 13.9 kg (30.6 lb) Shipping Box (8 units) 220x220x150 mm (8.7x8.7x5.9 in) 1 Driver mounted on B&C ME 45 horn. 2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. 5 12 dB/oct. or higher slope high-pass filter.

Driver 1" 20W, 107dB

40 W continuous program power capacity
1” horn throat diameter
25 mm (1 in) aluminium voice coil
Mylar diaphragm
1500 – 18000 Hz response
107 dB sensitivity

 

150W AES compression driver, 4 διάφραγμα τιτανίου, coherent wave phasing plug, 8Ω

220 W continuous program power capacity
1.4” horn throat diameter
75 mm (3 in) aluminium voice coil
Titanium diaphragm
500 – 18000 Hz response
108.5 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
Shorting copper cap for extended HF response
100 W continuous program power capacity 1' horn throat diameter 44 mm (1.7 in) aluminium voice coil Titanium diaphragm 1000 - 18000 Hz response 107 dB sensitivity Optimized Neodymium magnet assembly Shorting copper cap for extended HF response

General

Product type Compression driver
Brand B&C Speakers
Reference DE500
Product code DRV5008

Informations

Nominal impedance 8 ohm
Dimensional category 4 inch
Manufacturer sensitivity 107 dB
Nominal power handling 80 W
Bandwidth 1000÷18000 Hz
Recommended min cutoff frequency 1500 Hz
Exit dimension 1.0 inch

Fundamental parameters

Le 0.11 mH

Datas

Flux density 1.9 T
Zmin 7.8 ohm

Dimensions

Voice coil diameter 1.7 inch
Outside diameter 102 mm
Depth 51 mm
Driver mounting system 2 points on diameter 76 mm
Driver mounting system N°2 3 points on diameter 57 mm

Shape & Materials

Front chape Cylindrical
Magnet type Neodymium
Winding material Aluminium
Diaphragm material Titanium

150W AES compression driver, 4 διάφραγμα τιτανίου, coherent wave phasing plug, neodymium rare-earth magnet assembly, 8Ω
Weight1.70 kg1.00 kg5.00 kg2.60 kg5.00 kg10.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.70 kg
Weight 1.00 kg
Weight 5.00 kg
Weight 2.60 kg
Weight 5.00 kg
Weight 10.00 kg