| Content |
Loaded with a custom 10" woofer and 1" Celestion compression driver the GT 10 A active fullrange loudspeaker provides exceptional value and crisp, well balanced audio with a 65 Hz - 19 kHz frequency response, 90° x 60° dispersion and 119dB peak SPL.
The sturdy bass reflex cabinet is made from 15mm MDF and covered in heavy-duty textured Dura-Vinyl for protection and lasting appearance. It features a honeycomb steel grille, 54° monitor angle and dual tilt stand mount.
The GT 10 A is powered by a built-in Class D digital amplifier with high efficiency SMPS and 800 watts peak output. It provides line and microphone inputs on XLR and 6.3 mm connectors, a 2-band EQ and is protected against overcurrent and overvoltage for reliable operation.
A protective cover is available as accessory.
| Product number: | LDGT10A |
|---|
| Product type: | PA loudspeaker | | Type: | active | | Low/mid driver dimensions: | 10“ | | Low/mid driver dimensions (mm): | 254mm | | Woofer magnet: | Ferrite | | Woofer brand: | Custom-made | | Woofer voice coil: | 2“ | | Woofer voice coil (mm): | 50.8mm | | Horn: | CD horn | | HF driver dimensions: | 1“ | | HF driver dimensions (mm): | 25.4mm | | HF driver magnet: | Ferrite | | HF driver brand: | Celestion | | HF driver voice coil: | 1“ | | HF driver voice coil (mm): | 25.4mm | | Amplifier: | Class D | | Dispersion (H x V): | 90 x 60° | | RMS: | 200W | | Peak power: | 800W | | Frequency response: | 65 - 19000Hz | | Crossover frequency: | 2500Hz | | Max. SPL (continuous): | 116dB | | Max. SPL (peak): | 119dB | | Protection circuits: | over-current, HF Driver, over voltage | | Input sensitivity: | Mic: 150 mV / Line: -10dBu | | Controls: | Mic Gain, Bass, Treble, Power, volume, Line Gain | | Indicators: | limit, protect (protection circuit engaged), signal, Power | | Line inputs: | 1 | | Line input connectors: | XLR, 6.3 mm Jack | | Mic inputs: | 1, 6.3 mm Jack, XLR | | Line outputs: | 1 | | Line output connectors: | XLR | | Operating voltage: | Switching Power Supply, 110 V AC - 120 V AC, 220 V AC - 240 V AC (Auto), 50 - 60 Hz | | Cabinet material: | 15 mm MDF | | Cabinet surface: | Dura-vinyl textured paint | | Cabinet construction: | vented | | Monitor angle: | 54° | | Width: | 328mm | | Height: | 500mm | | Depth: | 293mm | | Features: | dual-tilt flange (0°/5°), rugged steel grille | | Weight: | 13.8kg |
| RCF ART 710-A MK4 ενεργό ηχείο 2-δρόμων 10" + 1“, 700Wrms
1400 WATT 2-way peak power
129 dB max spl
Innovative DSP Processing
1" Compression Driver, 1.75" v.c.
10" Woofer
90°x70°, wide dispersion constant directivity horn
FiRPHASE Technology
ART 710-A MK4 is a unique product in its category. The compression driver with custom designed dome and high power voice coil offers unique vocal clarity and sound projection. The 10” woofer offers an extremely linear response and a precise, deep low frequency control. The transducers are produced using the most advanced assembly technologies. The amplifier delivers 1400 watts and is controlled by a DSP that takes care of crossover, equalisation, phase control, soft limiting and speaker protections.
APPLICATIONS
- Compact live sound reinforcement
- Portable PA
- Frontfill and sidefill
- Auditorium, Clubs, Ballroom, Corporate AV, Theatre
ΑΚΟΥΣΤΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ
• Frequency Response -3 dB: 50 Hz ÷ 20000 Hz
• Max SPL: 129 dB
• Horizontal coverage angle: 90°
• Vertical coverage angle: 70°
• Compression Driver: 1.0“, 1.75" v.c.
• Woofer: 10“, 2.5" v.c.
• Input signal: bal / unbal
• Input connectors: XLR, Jack
• Output connectors: XLR
• Input sensitivity: -2 dBu / +4 dBu
• Crossover frequencies: 1600 Hz
• Protections: Thermal, rms
• Limiter: Soft limiter
• Controls: Volume, Boost, Mic/Line
Total power: 1400 W PEAK
• High frequencies: 400 W PEAK
• Low frequencies: 1000 W PEAK
Total power: 700 W RMS
• High frequencies: 200 W RMS
• Low frequencies: 500 W RMS
• Cooling: Convection / foced
• Connections: VDE conncector in
• Cabinet Material: Composite PP
• Hardware: 2xM10 flying p.
• Handles: 1 top
• Pole Mount/Cap: Yes
• Colour: Black
• Height: 548 / 21.6 mm/inch
• Width: 340 / 13.3 mm/inch
• Depth: 305 / 12.0 mm/inch
• Net Weight: 14.4 / 31.75 kg/lbs |
- 2 way full range powered loudspeaker for portable PA and installation applications
- 600 Watt power featuring KLARK TEKNIK Class-D technology
- KLARK TEKNIK Digital Signal Processing for total system control
- High excursion 10" low frequency driver with low mass voice coil for improved transient response
- 1" high temperature dome compression driver with extended high frequency reproduction
- Converging elliptical waveguide provides wide dispersion and excellent pattern control
- Speech/music switch featuring optimised equalisation for voice or music applications
- Switchable 100 Hz high pass filter for subwoofer integration
- Lightweight composite enclosure with black finish
- Rugged powder coated perforated steel mesh grille
- Dual angle pole mount for accurate audience coverage
- Multiple internal rigging points for installation applications
- 3-Year Warranty Program*
- Designed and engineered in England
| Dimensions (H x W x D) | 522 x 329 x 294 mm (20.6 x 12.9 x 11.6“) |
|---|
| Net Weight | 13.3 kg (29.3 lbs) | | Components | 1 x 10" (254 mm) LF driver, 1 x 1" (25 mm) HF compression driver | | Frequency Response | 55 Hz - 18 kHz ±3 dB | | Dispersion | 90 °H x 60 °V @ -6 dB points | | Calculated Max SPL | 126 dB peak | | Construction | Injection-moulded polypropylene enclosure. Recessed carrying handle. Integral dual-angle pole mount socket | | Grille | Powder coated galvanised perforated steel mesh with foam backing | | Connectors | Mic/Line input: combo jack/female XLR wired pin 2 hot
Mix out: male XLR wired pin 2 hot
IEC mains connector with integrated fuseholder | | Rigging | (6) M10 threaded internal rigging points |
|
- 2-way powered loudspeaker with a 2” HF and a 10\" LF
- Maximum 137dB SPL and 44Hz-20kHz frequency range is ideal for today’s audio engineering demands
- High power 2000W Class-D amplifier module
- 96kHz DSP and FIR filter for true high-resolution sound with super low latency
- Features Advanced FIR-X tuning, the combination of FIR filtering and correct EQ for minimizing phase distortion
- Access a variety of DSP functions and load presets, or make precise adjustments to PEQ, delay and routing etc. via the intuitive LCD display
- D-Contour and highly reliable protection circuits
- Floor monitoring setting
- Lightweight yet very durable plywood cabinet with premium grade Polyurea coating
- Optional speaker cover (SPCVR-DZR10)
- Rotatable horn and variety of U-bracket options (UB-DZR) for rigging allow for very flexible setup and speaker placement
|
The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.
- 10-inch LF SMX woofer
- 1.25-inch HF titanium compression driver
- 2000 W Class-D power amplifier with integrated FIR-Drive DSP
- 134 dB peak SPL
| Frequency Range | 65 Hz - 20 kHz Full space measurement using the music DSP preset and 150 Hz low pass. | | Maximum SPL | 134 peak dB Maximum SPL is measured at 1 m using broadband pink noise at maximum output. | | Power Consumption | 100 - 240 V~, 50 - 60 Hz, 1.6 - 0.8 A Current rating is 1/8 power. | | Power Rating | 2000 W | | Frequency Response | 85 Hz - 20 kHz Full space measurement using the music DSP preset and 150 Hz low pass. | | Coverage (Nominal -6 dB) H | 90 ° | | Coverage (Nominal -6 dB) V | 60 ° | | LF Transducer | SMX2100 254 mm (10 in) | | HF Transducer | DH3-B 1.25-in titanium compression driver | | Crossover Frequency | 1700 Hz | | Connector Type | (2) XLR/TRS combo jack and (1) XLR link output | | Enclosure Material | 18-mm, 13-ply birch plywood with EVCoat | | Grill | 16AWG steel with powdercoat | | Suspension | (8) M10 suspension points | | Height | 526 mm (20.71“) | | Width | 330 mm (12.99“) | | Depth | 365 mm (14.37“) | | Weight Net | 20.3 kg (44.75 lbs) | | Shipping Weight | 22.9 kg (50.49 lbs) |
|
High-power 300-Watt 2-way PA sound reinforcement speaker system for live and playback applications. "Wireless-ready" for high-quality BEHRINGER digital wireless system (not included). Dedicated 2-band EQ plus integrated sound processor for ultimate system control and speaker protection. Additional Line output allows linking of additional speaker systems.
| Brand | BEHRINGER |
|---|
| Model | B110D | | Part Number | 000-ALX | | Speaker Type | Active | | Speaker Category | Satellite (full range), Floor Monitor | | Construction Material | Plastic Cabin | | Total Power (Watt) | 300 | | Woofer (inches) | 10 | | Tweeter / Driver (inches) | 1,35 | | Frequency Response (Hz) | 45-20000 | | Weight (kg) | 8,1 | | Color | Black | | Application | Portable PA | | Series | EUROLIVE series | | Warranty | 1 Year |
|
Reviews
There are no reviews yet.