LD Systems LDEB102AG2 STINGER G² Series – 10″ powered PA Speaker 340W PEAK

Stinger 10 G2 Active Full-Range Speaker

The Stinger 10 G2 is a compact, active full-range speaker with numerous potential applications.

The 2-way system is powered by the built-in B&O ICEpower 50ASX2 Class D power amp with a continuous power rating of 170W / 4 ohms. It is loaded with a 10" woofer and a 1" BMS HF compression river which ensure broad frequency response and attain a maximum sound level pressure of 117dB (130dB peak). There is a 2-band EQ for shaping the sound. The inputs are XLR/jack combo connectors; the output is an XLR connector.

An ergonomically milled, recessed carrying handle in the cabinet makes it easier to transport. The reflex cabinet is built of rugged multiplex and has threaded inserts for wall mounting and attaching flyware. Mounting brackets and a protection bag are available as accessories.

• Type: active
• Woofer size: 10"
• Woofer size: 254 mm
• Woofer magnet: ferrite
• Woofer brand: custom made
• Woofer voice coil: 2"
• Woofer voice coil: 50.8 mm
• Horn: CD horn
• HF driver size: 1"
• HF driver size: 25.4 mm
• HF driver magnet: ferrite
• HF driver brand: BMS
• HF driver voice coil: 1"
• HF driver voice coil: 25.4 mm
• Amplifier: Class D, ICEpower 50ASX2
• Dispersion angle (H x V): 100 x 55°
• Power output (RMS): 170 W
• Power output (peak): 340 W
• Frequency range: 65 - 19,000 Hz
• Crossover frequency: 2400 Hz
• Max SPL (continuous/peak): 117 / 130 dB
• Protection: HF driver, short circuit
• Controls: Bass, Line Gain, Mic Gain, Power, Treble, Volume
• Indicators: Limit, Power
• Line inputs: 1
• Line input connectors: XLR/ 6.3 mm jack (combo)
• Line outputs: 1
• Line output connectors: XLR
• Power supply: switching power supply
• Cabinet material: 15 mm plywood
• Cabinet surface: textured coating
• Cabinet type: bass reflex
• Monitor angle: 54°
• Width: 320 mm
• Height: 500 mm
• Depth: 290 mm
• Features: Aluminium stand support 36 mm, ergonomically milled handles, M10 thread for SuperClamp

The NX M10-A is the most compact and lightweight speaker of the NX range.

It is specifically designed as a versatile tool from stage monitoring to a very accurate near field sound reproduction.
From live sound to playback music the NX M10-A guarantees high performances and is superior to many larger speakers thanks to the high efficiency of its 10” neodymium transducer.

ST Series is a practical solution for high intelligibility speech and audio applications, covering infill or delay, production studios, presentations and high power music sound reinforcement with or without subwoofers. A key requirement for everyday audio systems, delivering simple ‘plug and play’ solutions, without compromising performance and portability.
Legendary RCF transducer technology coupled with state of the art digital amplification topology resulting in a perfectly optimised loudspeaker series. The ST Series provides high end audio coverage even at extreme sound pressure levels, unmatched reliability and acoustic compatibility across the whole series.

• • Main vocal stage monitor
• • High-output drum or keyboard monitor
• • Sidefill monitor for small- to medium-scale applications
• • Rental companies
• • Professional musicians

General Specs

800 Watt Peak, 400 Wat RMS
129 dB max SPL
45 Hz - 20 kHz frequency response
12" Woofer, 2.5" voice coil
1" Driver, 1.4" voice coil

Acoustical Specs

Frequency Response -3 dB: 45 Hz ÷ 20 Hz
Max SPL: 129 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1“, 1.4" voice coil
Woofer: 12“, 2.5" voice coil

Inputs/Outputs

Input signal: bal/unbal
Input connectors: Jack-XLR male
Output connectors: XLR female

Processor Section

Crossover frequencies: 1400 Hz
Protections: RMS limiter, HF
Limiter: Fast limiter

Amplifier Specifications

Total power: 800 W PEAK
High frequencies:200 W PEAK
Low frequencies: 600 W PEAK
Total power: 400W RMS
High frequencies:100 W RMS
Low frequencies: 300 W RMS

Cabinet Specs

Cabinet Material: Baltic birch
Handles: 1 side
Pole Mount/Cap: Yes
Colour: Black

Size/Weight

Height: 318/12.51 mm/inch
Width: 594/23.38 mm/inch
Depth: 400/15.74 mm/inch
Net Weight: 18/39.68 kg/lbs

The NX 10-SMA is equipped with new high power 400 W digital amplifier and a newly designed 10 " coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system.
The NX 10-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes:
- Floor, for stage monitoring;
- Free Field, for the use of the speakers as a stand-alone PA system.
Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road.
An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker.

• • Main vocal stage monitor
• • Drum or keyboard monitor
• • Main PA in small venues

General Specs

• 800 Watt Peak, 400 Watt RMS digital bi-amplification
• 127 dB max spl
• 60° x 60° constant directivity horn
• 10" High power neodymium woofer, 2.5" voice coil
• 7 kapton dome, 1" exit, neodymium high frequency driver
• DSP processing, floor - fre field equalization, soft limiter and protection
• Combo xlr/jack input, xlr signal output

Acoustical Specs

• Frequency Response -3 dB:60Hz ÷ 20000 Hz
• Max SPL:127dB
• Horizontal coverage angle:60°
• Vertical coverage angle:60°
• Compression Driver:7 kapton dome, 1" exit, neodymium
• Woofer:10" neo high power woofer, 2.5" voice coil

Processor Section

• Limiter:Soft Limiter
• Controls:Freefield, floor

Amplifier Specifications

• Total power:800W PEAK
• High frequencies:200 W PEAK
• Low frequencies:600 W PEAK
• Total power:400W RMS
• High frequencies:100 W RMS
• Low frequencies:300 W RMS

Cabinet Specs

• Cabinet Material:Baltic Birch
• Handles:1 on side
• Pole Mount/Cap:yes
• Grille:steel

Size/Weight

• Height:324/12.7mm/inch
• Width:450/17.7mm/inch
• Depth:417/16.4mm/inch
• Net Weight:14,5/31.96kg/lbs

StageSource™ is designed to be the worldʼs most versatile loudspeaker system for musicians. Using six powerful DSP-based Smart Speaker modes, the StageSource L3m output is optimized for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. Onboard accelerometer and pole mount sensors automatically detect the speakerʼs orientation and set the Smart Speaker mode accordingly.

The 1,400-watt, 3-way, tri-amped speaker system and a dual-braced tour-grade plywood enclosure combine to deliver astounding power and reliability. The innovative multi-function design enables the L3m to be the perfect loudspeaker in a wide variety of applications including floor or stage-stacked, pole-mounted, horizontal as a floor monitor, Virtual Tilt-back for instrument backline or flown with the integrated M10 suspension points for installation.