LD SYSTEMS LDEB122AG2 STINGER 12A G2- 12″ Active Speaker 400W

Discontinued

599.00 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
LD Systems STINGER 12 A G2 12″ active PA Speaker Pro Sound & Light 07/13   Stinger 12 G2 Active Full-Range Speaker The Stinger 12 G2 is an active, full-range speaker that is suitable for use in portable PA systems, as a monitor, and in permanent installations. The 2-way bass reflex design made of sturdy […]

 

Read more

LD Systems STINGER 12 A G2
12″ active PA Speaker

 
Stinger 12 G2 Active Full-Range Speaker

The Stinger 12 G2 is an active, full-range speaker that is suitable for use in portable PA systems, as a monitor, and in permanent installations.

The 2-way bass reflex design made of sturdy multiplex is loaded with a 12″ woofer and a 1″ BMS HF driver that attain a high maximum sound pressure level of 118dB (132dB peak). It is powered by the built-in Hypex Ucd400 Class D power amp with a peak power rating of 1600W / 4 ohms. An integral 2-band EQ is provided for tone control. The inputs are XLR/jack combo connectors. The output is an XLR connector. A Speakon-compatible power amp output permits parallel operation of passive speakers and subwoofers.

The hardware includes a stand support that is vertically adjustable by ±13.5° max. in seven increments for optimum orientation, six mounting holes for flyware, and LD “Evolutive” handles. These innovative carrying handles offer a secure grip from all sides for easier transport. Mounting brackets and a protective cover are available as accessories.

 

Product type
PA loudspeaker

Type
Actives

Low/mid driver dimensions
12 ”

Low/mid driver dimensions (mm)
304.8 mm

Woofer magnet
Ferrite

Woofer brand
Custom-made

Woofer voice coil
2.5 ”

Woofer voice coil (mm)
63.5 mm

Horn
CD horn

HF driver dimensions
1 ”

HF driver dimensions (mm)
25.4 mm

HF driver magnet
Ferrite

HF driver brand
BMS

HF driver voice coil
1 ”

HF driver voice coil (mm)
25.4 mm

Amplifier
Class D, Hypex Ucd400

Dispersion (H x V)
100 x 55 °

RMS
400 W

Peak power
1600 W

Frequency response
58 – 19000 Hz

Crossover frequency
1800 Hz

Max. SPL (continuous)
118 dB

Max. SPL (peak)
132* dB

Protection circuits
HF Driver , over voltage , over-current

Input sensitivity
– 5 dBu

Controls
Bass , Line Gain , Mic Gain , Power , Treble , volume

Indicators
limit , Power , protect (protection circuit engaged) , signal

Line inputs
1

Line input connectors
6.3 mm Jack , XLR

Mic inputs
6.3 mm Jack , XLR

Line outputs
1

Line output connectors
XLR

Loudspeaker outputs
1

Speaker output connections
Speakon compatible

Minimum impedance of connected speakers
8 Ohm(s)

Operating voltage
Switching Power Supply

Operating voltage
220 V AC – 240 V AC, 50-60 Hz

Cabinet material
15 mm Plywood

Cabinet surface
texture paint

Cabinet construction
vented

Monitor angle
54 °

Width
390 mm

Height
570 mm

Depth
370 mm

Features
*Short Term Max. SPL Peak @ 1m with Pink Noise , 6 x M8 flying points , LD Systems “Evolutive” handles , SM707 stand mount 36 mm

Weight
20,9 kg

 

 

 

Weight 20.00 kg

Reviews

There are no reviews yet.

Be the first to review “LD SYSTEMS LDEB122AG2 STINGER 12A G2- 12″ Active Speaker 400W”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD SYSTEMS LDEB122AG2 STINGER 12A G2- 12" Active Speaker 400W removeLD SYSTEMS LDMON101A G2 Powered 2-way Co-axial stage monitor 150 W RMS removeLD Systems LDATOP12 Block X 12" Mid High Unit Active Speaker 450W RMS removeRCF NX 10 SMA ACTIVE COAXIAL STAGE MONITOR 10"+1" removeRCF ART 422-A Active speaker system 12" + 2", 400W removeLINE 6 Stagesource L3M Active Monitor remove
NameLD SYSTEMS LDEB122AG2 STINGER 12A G2- 12" Active Speaker 400W removeLD SYSTEMS LDMON101A G2 Powered 2-way Co-axial stage monitor 150 W RMS removeLD Systems LDATOP12 Block X 12" Mid High Unit Active Speaker 450W RMS removeRCF NX 10 SMA ACTIVE COAXIAL STAGE MONITOR 10"+1" removeRCF ART 422-A Active speaker system 12" + 2", 400W removeLINE 6 Stagesource L3M Active Monitor remove
Image
SKULDEB122AG2LDMON101AG2LDATOP1213000233ART422AH00LN00002
Rating
Price 599.00 incl. GR VAT 365.00 incl. GR VAT 962.29 incl. GR VAT1,119.00 incl. GR VAT 805.49 incl. GR VAT 784.00 incl. GR VAT
Stock

Out of stock

Only 2 left in stock (can be backordered)

Available on backorder

In stock

In stock

In stock

AvailabilityOut of stockOnly 2 left in stock (can be backordered)Available on backorderIn stockIn stockIn stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

LD Systems STINGER 12 A G2
12" active PA Speaker

 
Stinger 12 G2 Active Full-Range Speaker

The Stinger 12 G2 is an active, full-range speaker that is suitable for use in portable PA systems, as a monitor, and in permanent installations.

The 2-way bass reflex design made of sturdy multiplex is loaded with a 12" woofer and a 1" BMS HF driver that attain a high maximum sound pressure level of 118dB (132dB peak). It is powered by the built-in Hypex Ucd400 Class D power amp with a peak power rating of 1600W / 4 ohms. An integral 2-band EQ is provided for tone control. The inputs are XLR/jack combo connectors. The output is an XLR connector. A Speakon-compatible power amp output permits parallel operation of passive speakers and subwoofers.

The hardware includes a stand support that is vertically adjustable by ±13.5° max. in seven increments for optimum orientation, six mounting holes for flyware, and LD "Evolutive" handles. These innovative carrying handles offer a secure grip from all sides for easier transport. Mounting brackets and a protective cover are available as accessories.

 

Product type
PA loudspeaker

Type
Actives

Low/mid driver dimensions
12 "

Low/mid driver dimensions (mm)
304.8 mm

Woofer magnet
Ferrite

Woofer brand
Custom-made

Woofer voice coil
2.5 "

Woofer voice coil (mm)
63.5 mm

Horn
CD horn

HF driver dimensions
1 "

HF driver dimensions (mm)
25.4 mm

HF driver magnet
Ferrite

HF driver brand
BMS

HF driver voice coil
1 "

HF driver voice coil (mm)
25.4 mm

Amplifier
Class D, Hypex Ucd400

Dispersion (H x V)
100 x 55 °

RMS
400 W

Peak power
1600 W

Frequency response
58 - 19000 Hz

Crossover frequency
1800 Hz

Max. SPL (continuous)
118 dB

Max. SPL (peak)
132* dB

Protection circuits
HF Driver , over voltage , over-current

Input sensitivity
- 5 dBu

Controls
Bass , Line Gain , Mic Gain , Power , Treble , volume

Indicators
limit , Power , protect (protection circuit engaged) , signal

Line inputs
1

Line input connectors
6.3 mm Jack , XLR

Mic inputs
6.3 mm Jack , XLR

Line outputs
1

Line output connectors
XLR

Loudspeaker outputs
1

Speaker output connections
Speakon compatible

Minimum impedance of connected speakers
8 Ohm(s)

Operating voltage
Switching Power Supply

Operating voltage
220 V AC - 240 V AC, 50-60 Hz

Cabinet material
15 mm Plywood

Cabinet surface
texture paint

Cabinet construction
vented

Monitor angle
54 °

Width
390 mm

Height
570 mm

Depth
370 mm

Features
*Short Term Max. SPL Peak @ 1m with Pink Noise , 6 x M8 flying points , LD Systems "Evolutive" handles , SM707 stand mount 36 mm

Weight
20,9 kg

 

 

 

The LDMON101A features a high end 10" co-axial speaker with a 1" compression driver and delivers 150 W RMS output power.

The Volex power supply system allows a secure connection of further active monitors, this feature enables the installation of a big active stage monitor system while using only one power plug. The monitor also features a softclip-limiter as well as a volume control.

The Housing was built out of a high quality plywood with a high resistance textured finish. The stabile front guard ideally protects the speakerbox. 

Specifications LDMON101A:
  • Model Name: LDMON101A
  • Type: Bass Reflex
  • Components:
    • Woofer / Compression Driver: 10" / 1" Coaxial Custom Made Speaker
    • Amplification: Class A / B
  • Dispersion: 75° x 75°
  • Power: 150 W RMS
  • Frequency Range: 90 Hz- 20 Khz
  • SPL (1 W / 1 m): 99 dB
  • Max. SPL: 121 dB
  • Protection: Limiter, Circuit and Overcurrent
  • Controls: Volume, On/Off Switch
  • Indicators: Signal, Power, Limit
  • Connectors:
    • Input: Line: XLR /6,3 mm jack (combo)
    • Output: Line: XLR
  • Power Supply: Transformer
  • Cabinet Material: 15 mm Plywood
  • Cabinet Surface: Painting
  • Dimensions: 360 x 370 x 425 mm
  • Features: Ergonomic milled handles, VOLEX power plug input / output

The tops of the LDBLOCKX Power Tower are fitted with 12" custom made midrange speakers and a 1" Celestion Driver, they are driven by a 450 W RMS Bi-Amp amplifier producing a maximum sound pressure level of 128 dB.

Specifications LD Block X 12" Topteil Active:
  • Model Name: LDATOP12
  • Type: Bassreflex
  • Components:
    • Woofer: 12" Custom Made
    • Compression Driver: 1" Custom Made
    • Amplification: Class A / B (Bi-Amp)
  • Dispersion: 60° x 40°
  • Power (RMS): 350 W + 100 W
  • Frequency Range: 80 Hz - 20 kHz
  • SPL (1 W/ 1 m): 101 dB
  • Max SPL: 128 dB
  • Protection: Limiter, Thermal, DC, Short circuit, HF
  • Controls: Main Volume, Tweeter Volume, switchable High Pass (80 / 120 Hz), On/Off Switch
  • Indicators: Power, Limiter, Signal, Protect
  • Connectors:
    • Input: Line: XLR + Jack 6,3mm (Combo)
    • Output: Line: XLR
  • Power Supply: Transformer
  • Cabinet Material: 15 mm Plywood
  • Cabinet Surface: Painting
  • Dimensions (W x H x D): 450 x 500 x 520 mm
  • Features: Ergonomic milled handles

The NX 10-SMA is equipped with new high power 400 W digital amplifier and a newly designed 10 " coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system.
The NX 10-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes:
- Floor, for stage monitoring;
- Free Field, for the use of the speakers as a stand-alone PA system.
Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road.
An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker.

APPLICATIONS
  • • Main vocal stage monitor
  • • Drum or keyboard monitor
  • • Main PA in small venues

General Specs

  • 800 Watt Peak, 400 Watt RMS digital bi-amplification
  • 127 dB max spl
  • 60° x 60° constant directivity horn
  • 10" High power neodymium woofer, 2.5" voice coil
  • 7 kapton dome, 1" exit, neodymium high frequency driver
  • DSP processing, floor - fre field equalization, soft limiter and protection
  • Combo xlr/jack input, xlr signal output

Acoustical Specs

  • Frequency Response -3 dB:60Hz ÷ 20000 Hz
  • Max SPL:127dB
  • Horizontal coverage angle:60°
  • Vertical coverage angle:60°
  • Compression Driver:7 kapton dome, 1" exit, neodymium
  • Woofer:10" neo high power woofer, 2.5" voice coil

Processor Section

  • Limiter:Soft Limiter
  • Controls:Freefield, floor

Amplifier Specifications

  • Total power:800W PEAK
  • High frequencies:200 W PEAK
  • Low frequencies:600 W PEAK
  • Total power:400W RMS
  • High frequencies:100 W RMS
  • Low frequencies:300 W RMS

Cabinet Specs

  • Cabinet Material:Baltic Birch
  • Handles:1 on side
  • Pole Mount/Cap:yes
  • Grille:steel

Size/Weight

  • Height:324/12.7mm/inch
  • Width:450/17.7mm/inch
  • Depth:417/16.4mm/inch
  • Net Weight:14,5/31.96kg/lbs

Features

    400 Watt digital bi-amplification
    128 dB max spl
    Wide dispersion 90 x 60 constant directivity horn
    12" High power woofer, 3" voice coil
    2" Titanium dome, high frequency driver
    DSP processing, boost eq, soft limiter and protection
    Xlr/jack input, xlr signal output

Acoustical Specifications

    Frequency Response -3 dB: 45 Hz ÷ 20 kHz
    Max SPL: 128 dB
    Horizontal coverage angle: 90°
    Vertical coverage angle: 60°
    Compression Driver: 2" 2.5" voice coil
    Woofer: 12" 3" voice coil

Input/Output Section

    Input connectors: xlr-jack
    Output connectors: xlr

Processor Section

    Crossover frequencies: 1300 Hz
    Controls: Flat, Boost

Amplifier Specifications

    Total power: 400 W
    High frequencies: 100 W
    Low frequencies: 300 W

Cabinet

    Handles: 1 on top, 2 on sides
    Pole Mount/Cap: yes
    Grille: steel

Physical Specifications

    Height: 637/25 mm/inch
    Width: 384/15.11 mm/inch
    Depth: 363/14.2 mm/inch
    Net Weight: 20.2/44.53 kg/lbs

StageSource™ is designed to be the worldʼs most versatile loudspeaker system for musicians. Using six powerful DSP-based Smart Speaker modes, the StageSource L3m output is optimized for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. Onboard accelerometer and pole mount sensors automatically detect the speakerʼs orientation and set the Smart Speaker mode accordingly.

The 1,400-watt, 3-way, tri-amped speaker system and a dual-braced tour-grade plywood enclosure combine to deliver astounding power and reliability. The innovative multi-function design enables the L3m to be the perfect loudspeaker in a wide variety of applications including floor or stage-stacked, pole-mounted, horizontal as a floor monitor, Virtual Tilt-back for instrument backline or flown with the integrated M10 suspension points for installation.

 

 

Cabin Type: Wooden, 3-way
Monitor Use: Yes
Amplifier: 1,400‐watt
LF/MF, Woofer: 2x10”
HF, Horn: 1” exit compression driver
DSP Processor: Yes
Frequency Response: 47 Hz to 18 kHz
Dimensions: 312 mmx861 mmx 312 mm
Weight: 26.1 kg
Color: Black

 

Weight20.00 kg12.80 kg34.50 kg14.50 kg20.20 kg26.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 20.00 kg
Weight 12.80 kg
Weight 34.50 kg
Weight 14.50 kg
Weight 20.20 kg
Weight 26.00 kg