| Content | LD Systems STINGER 12 A G2
12" active PA Speaker
Stinger 12 G2 Active Full-Range Speaker
The Stinger 12 G2 is an active, full-range speaker that is suitable for use in portable PA systems, as a monitor, and in permanent installations.
The 2-way bass reflex design made of sturdy multiplex is loaded with a 12" woofer and a 1" BMS HF driver that attain a high maximum sound pressure level of 118dB (132dB peak). It is powered by the built-in Hypex Ucd400 Class D power amp with a peak power rating of 1600W / 4 ohms. An integral 2-band EQ is provided for tone control. The inputs are XLR/jack combo connectors. The output is an XLR connector. A Speakon-compatible power amp output permits parallel operation of passive speakers and subwoofers.
The hardware includes a stand support that is vertically adjustable by ±13.5° max. in seven increments for optimum orientation, six mounting holes for flyware, and LD "Evolutive" handles. These innovative carrying handles offer a secure grip from all sides for easier transport. Mounting brackets and a protective cover are available as accessories.
Product type
PA loudspeaker
Low/mid driver dimensions
12 "
Low/mid driver dimensions (mm)
304.8 mm
Woofer voice coil (mm)
63.5 mm
HF driver dimensions (mm)
25.4 mm
HF driver voice coil (mm)
25.4 mm
Amplifier
Class D, Hypex Ucd400
Dispersion (H x V)
100 x 55 °
Frequency response
58 - 19000 Hz
Crossover frequency
1800 Hz
Max. SPL (continuous)
118 dB
Protection circuits
HF Driver , over voltage , over-current
Input sensitivity
- 5 dBu
Controls
Bass , Line Gain , Mic Gain , Power , Treble , volume
Indicators
limit , Power , protect (protection circuit engaged) , signal
Line input connectors
6.3 mm Jack , XLR
Mic inputs
6.3 mm Jack , XLR
Line output connectors
XLR
Speaker output connections
Speakon compatible
Minimum impedance of connected speakers
8 Ohm(s)
Operating voltage
Switching Power Supply
Operating voltage
220 V AC - 240 V AC, 50-60 Hz
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Cabinet construction
vented
Features
*Short Term Max. SPL Peak @ 1m with Pink Noise , 6 x M8 flying points , LD Systems "Evolutive" handles , SM707 stand mount 36 mm
|
Features
400 Watt digital bi-amplification
127 dB max spl
Wide dispersion 90 x 60 constant directivity horn
12" High power woofer, 2.5" voice coil
1" Mylar dome, high frequency driver
DSP processing, boost eq, soft limiter and protection
Xlr/jack input, xlr signal output
Acoustical Specifications
Frequency Response -3 dB: 50 Hz ÷ 20 kHz
Max SPL: 127 dB
Horizontal coverage angle: 90°
Vertical coverage angle: 60°
Compression Driver: 1" 1.4" voice coil
Woofer: 12" 2.5" voice coil
Input/Output Section
Input signal: bal/unbal
Input connectors: xlr-jack
Output connectors: xlr
Processor Section
Crossover frequencies: 1800 Hz
Limiter: Fast limiter, RMS limiter
Controls: Flat, Boost
Amplifier Specifications
Total power: 400 W
High frequencies: 100 W
Low frequencies: 300 W
Cabinet
Cabinet Material: Composite PP
Hardware: 2 x M10 flying points
Handles: 1 on top, 2 on sides
Pole Mount/Cap: yes
Grille: steel
Colour: Anthracite grey
Physical Specifications
Height: 637/25 mm/inch
Width: 384/15.11 mm/inch
Depth: 363/14.2 mm/inch
Net Weight: 17.2/37.91 kg/lbs
|
Key Features:
- Compact Powered bi-amplified
full-range loudspeaker with JBL
DrivePack® technology for portable or
installed use
- Optimized for both portable/rental or
permanent-venue use
- 1750 watts peak output power,
875 watts continuous
- 12-inch Differential Drive® lowfrequency
driver for extended lowfrequency
output
- Robust powder-coated die cast
aluminum handles, designed for
strength and comfort
- Integrated 35 mm stand mount
Specifications:
Frequency Response (+/-3 dB): 65 Hz - 18 kHz80 Hz – 20 kHz
Frequency Range (-10 dB): 55 Hz - 20 kHz50 Hz – 20 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 12.6
Directivity Index (DI): 11 dB
Maximum Peak Output1: 134 dB SPL 1m
Transducer Section:
Low Frequency Section: JBL 2262FF, 304 mm (12 in) dia., 76 mm (3 in) Dual Coil
neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance: 2 x 2 ohms
High Frequency: JBL 2452H-SL, 100 mm (4 in) titanium damped
diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance: 8 ohms
System:
DPC1 Internal Amplification Output
(at nominal load) 1750 Watts Peak, 875 Watts Continuous
DPC1 Output (Continuous IEC shaped
pink noise into rated load impedance): 750LF/125HF Watts
DPC1 Output Section: LF: Dual Bridged Technology™, Class D
HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls: 80 Hz Subwoofer High Pass Filter. Enable/Disable
0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing: DSP based, resident in Input Module.
System Management: DSP based limiters for mechanical and thermal
protection
AC Power Operating Range: 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage: 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector: Neutrik PowerCon (NAC 3MPA)
AC Loop-thru: Neutrik PowerCon (NAC 3MPB)
AC Current Requirement: 6A per system at 120V, 3A per system at 240V
Enclosure:
Box Construction: 5/8 in. multi-ply exterior grade Baltic birch. Internally
braced. Black DuraFlex™ finish.
Suspension System: 9 M10 Fittings + 2 M6 Fittings, 35 mm pole mount
socket
Grille: 14 Gauge Black powder-coated perforated steel with
foam backing.
Dimensions (H x W x D): 533 x 358 x 334 mm
21.0 x 14.1 x 13.1 in
Net Weight: 21.3 kg (47 lb)
|
The NX 10-SMA is equipped with new high power 400 W digital amplifier and a newly designed 10 " coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system.
The NX 10-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes:
- Floor, for stage monitoring;
- Free Field, for the use of the speakers as a stand-alone PA system.
Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road.
An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker.
APPLICATIONS
- • Main vocal stage monitor
- • Drum or keyboard monitor
- • Main PA in small venues
General Specs
- 800 Watt Peak, 400 Watt RMS digital bi-amplification
- 127 dB max spl
- 60° x 60° constant directivity horn
- 10" High power neodymium woofer, 2.5" voice coil
- 7 kapton dome, 1" exit, neodymium high frequency driver
- DSP processing, floor - fre field equalization, soft limiter and protection
- Combo xlr/jack input, xlr signal output
Acoustical Specs
- Frequency Response -3 dB:60Hz ÷ 20000 Hz
- Max SPL:127dB
- Horizontal coverage angle:60°
- Vertical coverage angle:60°
- Compression Driver:7 kapton dome, 1" exit, neodymium
- Woofer:10" neo high power woofer, 2.5" voice coil
Processor Section
- Limiter:Soft Limiter
- Controls:Freefield, floor
Amplifier Specifications
- Total power:800W PEAK
- High frequencies:200 W PEAK
- Low frequencies:600 W PEAK
- Total power:400W RMS
- High frequencies:100 W RMS
- Low frequencies:300 W RMS
Cabinet Specs
- Cabinet Material:Baltic Birch
- Handles:1 on side
- Pole Mount/Cap:yes
- Grille:steel
Size/Weight
- Height:324/12.7mm/inch
- Width:450/17.7mm/inch
- Depth:417/16.4mm/inch
- Net Weight:14,5/31.96kg/lbs
|
The HD 10-A, with an exceptional full range, is the optimum choice for live sound and installed situations.
Thanks to its deep bass punch, clean midrange output and accurate high frequencies, it offers the ultimate intelligibility in vocal and recorded music, from live sound to playback and from monitoring to fixed installation applications.
APPLICATIONS
- • Live Sound
- • Rental
- • Portable PA
- • Stage Monitoring
- • Clubs
General Specs
1200 WATT PEAK, 600 WATT RMS
Digital Bi-amp
DSP Sound Processing
RCF Precision Transducers
SPL max. 129 dB
Acoustical Specs
Frequency Response -3 dB:50 Hz ÷ 20000 Hz
Max SPL:129 dB
Horizontal coverage angle:90°
Vertical coverage angle:60°
Compression Driver:1“, 1.7" voice coil
Woofer:10“, 2.5" voice coil
Inputs/Outputs
Input signal:bal/unbal
Input connectors:Jack-XLR male
Output connectors:XLR female
Input sensitivity:-2 dBu / + 4 dBu
Processor Section
Crossover frequencies:1700 Hz
Protections:thermal, RMS
Limiter:Fast limiter
Controls:Volume, EQ shape, Mic/line
Amplifier Specifications
Total power:1200 W PEAK
High frequencies:300 W PEAK
Low frequencies:900 W PEAK
Total power:600 W RMS
High frequencies:150 W RMS
Low frequencies:450 W RMS
Connections:VDE AC socket
Cabinet Specs
Cabinet Material:Composite PP
Hardware:1 x M10 top, 1 x M10 bottom, 3 x M6 bottom
Handles:1 top, 1 side
Pole Mount/Cap:Yes
Grille:Steel
Colour:Black
Size/Weight
Height:527/20.74 mm/inch
Width:303/11.92 mm/inch
Depth:302.5/11.90 mm/inch
Net Weight:13.9/30.64 kg/lbs |
The NX M12-A is a compact, lightweight two-way multipurpose loudspeaker system designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA.
It is equipped with a new 750 Watt Digipro digital amplifier and premium transducers components.
The low frequency section is a 12” woofer with a 1.75” voice coil diaphragm while the high section is a neodymium compression driver mounted to a constant directivity horn.
| Features |
|---|
| 750 Watt Digipro digital amplifier | | 130 dB max spl | | 90 x 40, Wide dispersion constant directivity angle, rotatable horn | | 12" woofer, high power neodymium 3" voice coil | | 1" HF driver, titanium dome, neodymium 1.75" voice coil | | PFC power factor correction |
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 50 Hz | ÷ 20 kHz | | Max SPL: | 130 dB | | | Horizontal coverage angle: | 90° | | | Vertical coverage angle: | 40° | | | Compression Driver: | 1" neo, 1.75" v.c. | | | Woofer: | 12" neo, 3" v.c. | |
| INPUT/OUTPUT SECTION |
|---|
| Input signal: | ba l/ unbal | | | Input connectors: | Combo xlr-jack | | | Output connectors: | xlr | | | Input sensitivity: | -2 dBu / +4 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 1700 Hz | | | Protections: | Thermal, rms | | | Limiter: | Soft peak limiter | | | Controls: | Volume, side / floor, contour | |
| AMPLIFIER SPECIFICATIONS |
|---|
| Total power: | 750 Watts | | | High frequencies: | 250 Watts | | | Low frequencies: | 500 Watts | | | Cooling: | Convection / forced | | | Connections: | Powercon in / out | |
| CABINET |
|---|
| Cabinet Material: | Balitc birch | | | Hardware: | 6 x fly tracks | | | Handles: | 2 side | | | Pole Mount/Cap: | Yes | | | Colour: | Black | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 646 / 25.43 mm/inch | | | Width: | 385 / 15.15 mm/inch | | | Depth: | 375 / 14.76 mm/inch | | | Net Weight: | 21.2 / 46.73 Kg/Lbs |
|
Reviews
There are no reviews yet.