| Content | LD Systems STINGER 12 A G2
12" active PA Speaker
Stinger 12 G2 Active Full-Range Speaker
The Stinger 12 G2 is an active, full-range speaker that is suitable for use in portable PA systems, as a monitor, and in permanent installations.
The 2-way bass reflex design made of sturdy multiplex is loaded with a 12" woofer and a 1" BMS HF driver that attain a high maximum sound pressure level of 118dB (132dB peak). It is powered by the built-in Hypex Ucd400 Class D power amp with a peak power rating of 1600W / 4 ohms. An integral 2-band EQ is provided for tone control. The inputs are XLR/jack combo connectors. The output is an XLR connector. A Speakon-compatible power amp output permits parallel operation of passive speakers and subwoofers.
The hardware includes a stand support that is vertically adjustable by ±13.5° max. in seven increments for optimum orientation, six mounting holes for flyware, and LD "Evolutive" handles. These innovative carrying handles offer a secure grip from all sides for easier transport. Mounting brackets and a protective cover are available as accessories.
Product type
PA loudspeaker
Low/mid driver dimensions
12 "
Low/mid driver dimensions (mm)
304.8 mm
Woofer voice coil (mm)
63.5 mm
HF driver dimensions (mm)
25.4 mm
HF driver voice coil (mm)
25.4 mm
Amplifier
Class D, Hypex Ucd400
Dispersion (H x V)
100 x 55 °
Frequency response
58 - 19000 Hz
Crossover frequency
1800 Hz
Max. SPL (continuous)
118 dB
Protection circuits
HF Driver , over voltage , over-current
Input sensitivity
- 5 dBu
Controls
Bass , Line Gain , Mic Gain , Power , Treble , volume
Indicators
limit , Power , protect (protection circuit engaged) , signal
Line input connectors
6.3 mm Jack , XLR
Mic inputs
6.3 mm Jack , XLR
Line output connectors
XLR
Speaker output connections
Speakon compatible
Minimum impedance of connected speakers
8 Ohm(s)
Operating voltage
Switching Power Supply
Operating voltage
220 V AC - 240 V AC, 50-60 Hz
Cabinet material
15 mm Plywood
Cabinet surface
texture paint
Cabinet construction
vented
Features
*Short Term Max. SPL Peak @ 1m with Pink Noise , 6 x M8 flying points , LD Systems "Evolutive" handles , SM707 stand mount 36 mm
| LD Systems Stinger MON81AG2
The LD Stinger MON81AG2 is an especially compact active monitor with broad frequency response and a maximum sound-level pressure of 116dB for versatile use on stage.
The 8" coaxial speaker with an integral 1" HF driver attains a dispersion angle of 75°x75°, which is beneficial in multifaceted applications as a stage monitor. The coaxial configuration results in a very homogenous sound in the entire dispersion area plus very low susceptibility to feedback. The active monitor is driven by a Class AB power amplifier with an output power of 80W RMS; short-circuit protection and a limiter ensure dependable operation.
The signal is connected and looped through using an XLR/ jack combo socket and the XLR output. The rear connector panel is rounded out by a volume control, LED indicators, and the IEC power socket
The elegant bass-reflex housing made of 15mm multiplex is finished with a durable coating and has ergonomically milled handles and a metal grille to protect the speaker. The monitor angle is 35°.
Type: active
Woofer size: 8“
Woofer size: 203 mm
Woofer type: coaxial speaker
Woofer magnet: ferrite
Woofer brand: custom made
Woofer voice coil: 2
Woofer voice coil: 50.8 mm
HF driver size: 1“
HF driver size: 25.4 mm
HF driver magnet: ferrite
HF driver brand: custom made
HF driver voice coil: 1“
HF driver voice coil: 25.4 mm
Amplifier: Class A / B
Dispersion angle (H x V): 75° x 75°
Power output (RMS): 80 W
Power output (peak): 160 W
Frequency response: 90 Hz - 20 kHz
Crossover frequency: 2.400 Hz
SPL (1 W/1 m): 97 dB
Max. SPL (continuous): 111 dB
Max. SPL (peak): 116 dB
Protection: limiter, short-circuit
Controls: Volume, On / Off
Indicators: Power, Limit
Number of line inputs: 1
Line input connectors: XLR/ 6.3 mm jack (combo)
Number of line outputs: 1
Line output connectors: XLR
Power supply: transformer
Operating voltage: 230 V AC / 50-60 Hz
Cabinet material: 15 mm plywood
Cabinet type: bass reflex
Monitor angle: 35°
Width: 320 mm
Depth: 250 mm
Height: 361 mm
Features: Ergonomic insert handles |
The NX M15-A is a high-efficiency, high output, two-way, wide dispersion active sound reinforcement system.
It benefits from the integration of 750 Watt Digipro digital amplifier power, control electronics and premium transducers components such as the 15” neodymium woofer with 3.5” high power voice coil.
The NX M15-A is the perfect balance between size and performance and it is smaller and lighter without compromising on performance.
| Features |
|---|
| 750 Watt Digipro digital amplifier | | 131 dB max spl | | 90 x 40, Wide dispersion constant directivity angle, rotatable horn | | 15" woofer, high power neodymium 3.5" voice coil | | 1" HF driver, titanium dome, neodymium 1.75" voice coil | | PFC power factor correction |
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 50 Hz | ÷ 20 kHz | | Max SPL: | 132 dB | | | Horizontal coverage angle: | 90° | | | Vertical coverage angle: | 40° | | | Compression Driver: | 1" neo, 1.75" v.c. | | | Woofer: | 15" neo, 3.5" v.c. | |
| INPUT/OUTPUT SECTION |
|---|
| Input signal: | bal / unbal | | | Input connectors: | Combo xlr-jack | | | Output connectors: | xlr | | | Input sensitivity: | -2 dBu / +4 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 1700 Hz | | | Protections: | Thermal, rms | | | Limiter: | Soft peak limiter | | | Controls: | Volume, side / floor, contour | |
| AMPLIFIER SPECIFICATIONS |
|---|
| Total power: | 750 Watts | | | High frequencies: | 250 Watts | | | Low frequencies: | 500 Watts | | | Cooling: | Convection / forced | | | Connections: | Powercon in / out | |
| CABINET |
|---|
| Cabinet Material: | Balitc birch | | | Hardware: | 6 x fly tracks | | | Handles: | 2 side | | | Pole Mount/Cap: | Yes | | | Colour: | Black | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 736 / 28.97 mm/inch | | | Width: | 430 / 16.92 mm/inch | | | Depth: | 395 / 15.55 mm/inch | | | Net Weight: | 23.8 / 52.46 Kg/Lbs |
|
Active 300-Watt 2-Way Monitor Speaker System with 12" Woofer, 1" Compression Driver and Feedback Filter
High-power 300-Watt 2-way monitor speaker system for live and playback applications
Exceptional sound quality, wide frequency bandwidth and dynamic range
Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
Adjustable feedback filter and integrated limiter for ultimate system control and speaker protection
Integrated sound processor for ultimate system control and speaker protection
Ultra-low noise Mic/Line input with Volume control and Clip LED
Dedicated 3-band EQ for perfect sound shaping
Extremely powerful 12'' long-excursion driver provides incredibly deep bass and acoustic power
High-resolution 1'' HF driver for exceptional high-frequency reproduction
Proprietary horn design for ultra-wide sound dispersion
Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
Integrated 35 mm pole socket for stand mounting and use as PA system
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
User's Manual
|
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 12“
LF Driver Power Amp 500W Class D
HF Driver Size 1.75“
HF Driver Power Amp 100W Class D
Frequency Range 55Hz-20kHz (-10dB)
Crossover Frequency 1.5kHz
Maximum Peak SPL 124dB
Horizontal Coverage Angle 90 Degrees
Vertical Coverage Angle 50 Degrees
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Fly, Wedge
Inputs 1 x XLR
Outputs 1 x XLR
Height 24“
Width 15.2“
Depth 15“
Weight 50 lbs.
|
The NX M10-A is the most compact and lightweight speaker of the NX range.
It is specifically designed as a versatile tool from stage monitoring to a very accurate near field sound reproduction.
From live sound to playback music the NX M10-A guarantees high performances and is superior to many larger speakers thanks to the high efficiency of its 10” neodymium transducer.
| Acoustical Specifications |
|---|
| Frequency Response -3 dB: | 50 Hz | ÷ 20 kHz | | Max SPL: | 129 dB | | | Horizontal coverage angle: | 90° | | | Vertical coverage angle: | 70° | | | Compression Driver: | 1" neo, 1.75" v.c. | | | Woofer: | 10" neo, 2.5" v.c | |
| INPUT/OUTPUT SECTION |
|---|
| Input signal: | bal / unbal | | | Input connectors: | Combo xlr-jack | | | Output connectors: | xlr | | | Input sensitivity: | -2 dBu / +4 dBu | |
| PROCESSOR SECTION |
|---|
| Crossover frequencies: | 1700 Hz | | | Protections: | Thermal, rms | | | Limiter: | Soft peak limiter | | | Controls: | Volume, side / floor, contour | |
| AMPLIFIER SPECIFICATIONS |
|---|
| Total power: | 750 Watts | | | High frequencies: | 250 Watts | | | Low frequencies: | 500 Watts | | | Cooling: | Convection / forced | | | Connections: | Powercon in / out | |
| CABINET |
|---|
| Cabinet Material: | Balitc birch | | | Hardware: | 6 x fly tracks | | | Handles: | 2 side | | | Pole Mount/Cap: | Yes | | | Colour: | Black | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 515 / 20.27 mm/inch | | | Width: | 334 / 13.14 mm/inch | | | Depth: | 337 / 13.26 mm/inch | | | Net Weight: | 15.2 / 33.5 Kg/Lbs |
|
Reviews
There are no reviews yet.