| Content |
Use's manual [3,48 MB]
Battery disposal information [77,1 KB]
|
|
| | LD Systems MEI ONE - The perfect In-Ear Monitoring Starter Set
The MEI ONE extends our range of In-Ear systems with a set at an amazing low price. Now really everyone can afford the comfort of an In-Ear Monitoring system. The MEI ONE is available in 3 different fixed frequencies, which can operate simultaneously and free of interference. It couldn't be easier! You may also use one transmitter with an unlimited number of belt pack receivers - the whole band hears the same!
Specifications MEI ONE Transmitter:
- Fixed Frequencies:
- LDMEIONE1T: 863.700 MHz
- LDMEIONE2T: 864.100 MHz
- LDMEIONE3T: 864.900 MHz
- RF output power: 10 dBm
- Gain adjustment range: + 40 dB
- Max. audio input level: + 6 dBV
- Front panel controls: Power On / Off, Headphones Level
- Rear panel controls: Input Level Left / Right, Mono / Stereo Switch
- Input: 2 x XLR / 6.3 mm Jack (combo)
- Power requirement: 12 - 18 V DC, 300 mA External Power Supply
- Operating temperature: -10°C to +50°C
- Dimensions (W x H x D): 212 x 38 x 96 mm
|
| General Characteristics:
- Digital Wireless Microphone Transceiver System
- Works without battery or mains power
- For use with dynamic microphones
- Integrated rechargeable lithium battery
- Range up to 20 m / 70 ft (without obstacles)
- Frequency bandwidth: 20 Hz - 20 kHz
- Latency: <5 ms
- 6 Switchable channels
- 24-Bit / 48 kHz A / D converter
- 2.4 GHz ISM worldwide usable frequency band
- 110 dB Dynamic bandwidth
- Signal to Noise Ratio: 110 dB
- Up to 5 hours of battery life per charge
- ON button on the transmitter
- Power switch on the receiver
- Mic / Line button on the transmitter
- Channel dial button
- Robust ABS housing
- Micro USB charging port
- Weight per unit: 95 g
Delivery Includes:
- XLR female plug-on transmitter
- XLR male plug-on receiver
- USB charging cable
Note: does not provide phantom power. | Battery disposal information [77,1 KB]
LD Systems MEI1000G2
The LD Systems MEI 1000 G2 is an advanced LICENSE FREE* 96 channel UHF in-ear monitoring system delivering natural sound with extended dynamics and low crosstalk in both the 823 - 832 and 863 - 865 MHz bands.
Switchable mono, stereo and focus modes select the perfect monitoring applications while adjustable EQ and limiter functions have been integrated for consistent sound reproduction from 60Hz - 16 kHz with a high S/N ratio and low THD. The LD MEI 1000 G2 allows the use of up to 5 systems simultaneously.
* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis
- Model name: LDMEI1000G2BPR
- Product type: Belt pack receiver
- Radio frequency range: 823 - 832 and 863 - 865 MHz
- Channels: 96 (8 groups of 12 channels)
- Transmission method: FM, stereo
- Frequency response: 60 Hz - 16 kHz
- S/N ratio: 80 dB
- THD:
- Audio outputs: 3.5 mm jack
- Max. audio output level: 100 mW
- Controls: Up, Down, Escape, Set, Volume
- Indicators: LC Display, Low Battery, Power
- Power supply: 2 x 1.5 V AA
- Operating time: > 13 hrs., battery-dependent
- Width: 65 mm
- Height: 90 mm
- Depth: 24 mm
|
| INPUT: |
1 HDMI on an HDMI connector |
| OUTPUT: |
1 HDBT on an RJ−45 female connector |
| EXTENSION LINE: |
HDBaseT 1.0 compliant;
Up to 40m (130ft) at 4K @60Hz (4:2:0);
Up to 70m (230ft) at full HD (1080p @60Hz 36bpp);
Note: When using Kramer HDBaseT cables |
| VIDEO: |
Up to 10.2Gbps bandwidth (3.4Gbps per graphic channel)
Up to 4K UHD @60Hz (4:2:0) 24bpp resolution
HDCP 2.2 signal compliance.
Supports deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels,
Dolby TrueHD, DTS−HD, 2K, 4K, and 3D as specified in HDMI 2.0 |
| POWER SOURCE: |
5V DC, 2A |
| POWER CONSUMPTION: |
5V DC, 570mA |
| ENCLOSURE: |
Pico Tools size, aluminum type |
| COOLING: |
Convection ventilation |
| OPERATING TEMPERATURE: |
0° to +40°C (32° to 104°F) |
| STORAGE TEMPERATURE: |
−40° to +70°C (−40° to 158°F) |
| HUMIDITY: |
10% to 90%, RHL non−condensing |
| INCLUDED ACCESSORIES: |
Power supply unit |
| Product Dimensions |
6.22cm x 5.18cm x 2.44cm (2.45" x 2.04" x 0.96" ) W, D, H |
| Product Weight |
0.1kg (0.2lbs) approx |
| Shipping Dimensions |
15.70cm x 12.00cm x 8.70cm (6.18" x 4.72" x 3.43" ) W, D, H |
| Shipping Weight |
0.4kg (0.9lbs) approx |
|
The ATW-T310b wireless UniPak® body-pack transmitter has both low and high impedance inputs plus a 5V DC bian connection allowing it to be used with condenser and dynamic microphones, as well as Hi-Z instrument pickups. The locking 4-pin HRS-type audio input connector is recessed to protect the connection from damage. Operating on two standard AA batteries, the transmitter features high and low-level RF output settings. The low-level setting allows two additional hours of bttery life while retaining a strong RF signal link. Soft-touch controls provide convenient access to a variety of functions including: RF power, audio input level, power/mute locks and frequency selection. Each transmitterʼs backlit LCD display presents a great deal of setup and operating information clearly and conveniently including battery fuel remaining, mute, and operating frequency. A flashing "Lo-Batt” alert visually signals the battery life is almost depleted. A dual-colour status LED illuminates green when power is on, and red when the transmitter is muted. Programmable power/mute locks limit the functioning of the transmitterʼs power/mute button as desired for particular users and applications. To match the audio input level to the transmitter, a four-position audio input gain setting selected through the function menu is provided.
The body-pack transmitter features a safety cover to protect the soft-touch controls from being accidentally activated and a recessed input connector to increase the life of the microphone cable. Constructed of high impact materials, the body-pack transmitter features a field replaceable whip antenna and captive locking battery cover door.
- RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 ohms
- Spurious Emissions: Following federal and national regulations
- Input Connection: Four-pin Locking Connector
Pin 1: GND, Pin 2: INST INPUT,
Pin 3: MIC INPUT, Pin 4: DC BIAS +5V - Batteries: Two 1.5V AA, not included
- Battery Life: High: 6 hours (alkaline), Low: 8 hours (alkaline)
Depending on battery type and use pattern. - Dimensions: 66.0 mm W x 24.0 mm D x 87.0 mm H
- Net Weight: 81 g without batteries
|
This wireless monitoring set's receiver uses adaptive-diversity technology. The earphone cable serves as a second antenna, which considerably reduces the number of drop-outs. Combined with IE 4 ear-canal phones for precise sound reproduction, EK 2000 IEM conveys an authentic acoustic pattern of live sound and allows you to monitor your own performance perfectly. |
Reviews
There are no reviews yet.