| Content |
Use's manual [3,48 MB]
Battery disposal information [77,1 KB]
|
|
| | LD Systems MEI ONE - The perfect In-Ear Monitoring Starter Set
The MEI ONE extends our range of In-Ear systems with a set at an amazing low price. Now really everyone can afford the comfort of an In-Ear Monitoring system. The MEI ONE is available in 3 different fixed frequencies, which can operate simultaneously and free of interference. It couldn't be easier! You may also use one transmitter with an unlimited number of belt pack receivers - the whole band hears the same!
Specifications MEI ONE Transmitter:
- Fixed Frequencies:
- LDMEIONE1T: 863.700 MHz
- LDMEIONE2T: 864.100 MHz
- LDMEIONE3T: 864.900 MHz
- RF output power: 10 dBm
- Gain adjustment range: + 40 dB
- Max. audio input level: + 6 dBV
- Front panel controls: Power On / Off, Headphones Level
- Rear panel controls: Input Level Left / Right, Mono / Stereo Switch
- Input: 2 x XLR / 6.3 mm Jack (combo)
- Power requirement: 12 - 18 V DC, 300 mA External Power Supply
- Operating temperature: -10°C to +50°C
- Dimensions (W x H x D): 212 x 38 x 96 mm
|
|
The long throw antenna system is made up of three components; The ATCS-A60MX mixer the ATCS-A60RX receiver antenna and the ATCS-A60TX transmitting antenna.
ATCS-A60MX IR transmitter/receiver mixer
• The master antenna mixer can power up 4 transmitter antennas and 4 receiving antennas.
• Infrared transmission keeps the signal in the room. Therefore multiple conference systems can be used in
adjacent rooms and the conference stays secure.
• The ATCS-A60MX includes rack mount adaptors
ATCS-A60RX IR Receiving Antenna (green indicator)
• The high-power receiving antenna can work up to 15 meters for large conference rooms or high ceiling
meeting rooms.
• The A60RX can be stand mounted and wall mounted
ATCS-A60TX IR receiver antenna (red indicator)
• The high-power transmitting antenna can work up to 20 meters for large conference rooms or high ceiling
meeting rooms.
• The A60RX can be stand mounted and wall mounted
- IR transmitting unit terminal: BNC×4(75 ohms)
- IR receiving unit terminal: BNC×4(75 ohms)
- I/O terminal: BNC×1(75 ohms)
- Operating temperature range: 0 to +40C°
- Power consumption: 50W
- Power supply: 100 to 240VAC, 50/60 Hz
- Dimensions: 44 (H) x 420 (W) x 225 (D) mm
- Weight Approx.: 3.0 kg
- Accessories: AC cord, Rack-mount adapter x 2, Screw to attach the rack-mount adapter x
ATCS-A60TX ATCS-A60RX - Communication method: IR wireless system
- Operating frequency band: 8 to 10 MHz 1 to 5 MHz
- IR wavelength: 870 nm
- Modulation method: Frequency modulation
- Operating distance*: 20 m (TX) 15 m (RX)
- Operating temperature range: 0 to 40C°
- Connecting terminal: BNC jack
- Power supply: 24V dc supplied from the ATCS-A60MX
- Dimensions: 44 (H) x 149 (W) x 97 (D) mm
- Weight: 351 g (TX) 386 g (RX)
|
Description
The PROCAB TST200 Cable Tester comes with all audio and electronics industry standard inputs, such as XLR Male/Female (3-pin/5-pin), 3.5 mm jack, 6.3 mm jack, DIN (3-pin/5-pin), RCA, Speaker (4-pin), RJ45, RJ11, BNC. The unit has separate 'Sender' and 'Receiver' units, which are able to be locked together for ease of transport, or split apart for testing cables at either end of a signal chain.
Simply plug in either end of an audio cable into the "A" and "B" side of the device, then select your mode to check signal continuity across all active pins or conductors. The brightly coloured LED's will light up indicating signal continuity and which pins are connected together. The inbuilt speaker of the TST200 also beeps when a successful connection is made between the Sender and Receiver units. If not all connections are made, no beep will sound, and the faulty connection's LED will not be lit.
Thanks to the split unit design means you can test both cables you have on hand, as well as longer cables that are already set up. This time saving feature removes the hassle of packing down your cables just for testing. The sender unit (B) includes a switch to select the speed in which the connections are tested, as well as the power switch.
This two-part cable tester is reliable and durable, whether it be on the road or in the studio. Both the A and B units are powered separately, and each side requires 9V battery power.
Product features
| Dimensions |
165 x 168 x 45 mm (W x H x D) |
| Construction |
Plastic |
| Application |
AV & IT |
|
Rental & MI |
| Series |
Bulk & Accessories |
|
Battery disposal information [77,1 KB]
User's manual [7,82 MB]
LD Systems MEI1000G2
The LD Systems MEI 1000 G2 is an advanced LICENSE FREE* 96 channel UHF in-ear monitoring system delivering natural sound with extended dynamics and low crosstalk in both the 823 - 832 and 863 - 865 MHz bands.
Switchable mono, stereo and focus modes select the perfect monitoring applications while adjustable EQ and limiter functions have been integrated for consistent sound reproduction from 60Hz - 16 kHz with a high S/N ratio and low THD. The LD MEI 1000 G2 allows the use of up to 5 systems simultaneously.
* license free: ISM-Band license free in Europe, please check duplex gap on a country-by-country basis
- Product type: Transmitter
- Radio frequency range: 823 - 832 and 863 - 865 MHz
- Channels: 96 (8 groups of 12 channels)
- Transmission method: FM, stereo
- RF output: 10 mW
- Frequency response: 60 Hz - 16 kHz
- S/N ratio: 85 dB
- Inputs: 2
- Input connections: XLR/ 6.3 mm jack (combo)
- Input impedance: 14 kOhm
- Antenna connector: TNC
- Controls: up, down, set, power, volume headphone, input level, pad
- Indicators: LC display
- Power supply: 12 - 18 V DC
- Width: 200 mm
- Height: 44 mm
- Depth: 96 mm
- Accessories (included): Antenna, power supply, headphones
|
Compatible with the Wireless Essentials® range. Rugged, ergonomic metal housing. Includes field-replaceable helical and flexible-whip antennas. Three-position sliding cover limits access to controls as desired: full access, Power/Mute button only, or no access. Two position mounting clip. For use with AEW-T1000a and all Audio-Technica UniPak™ Wireless Transmitters.
The AEW-T1000a wireless UniPak® body-pack transmitter has both low and high impedance inputs plus a DC bias connection allowing it to be used with both condenser and dynamic microphones. The locking 4-pin HRS-type audio input connector is recessed to protect the connection from damage. A dual-colour power/mute indicator LED provides visual indication of transmitter status. The transmitter operates using two standard AA batteries and features high- and low-level RF output settings. The low-level setting allows two additional hours of battery life while retaining a strong RF signal link. Soft-touch controls provide convenient access to a variety of functions including: RF power, audio input level, power/mute locks and frequency selection. Each transmitterʼs backlit LCD display presents a great deal of setup and operating information clearly and conveniently, including battery level remaining, mute, and operating frequency. A flashing "Lo-Batt” alert visually signals the battery life is almost depleted. Programmable power/mute locks limit the functioning of transmitterʼs power/mute button as desired for particular users and applications. Four nameable user presets allow for storage and recall of commonly used settings. To match the audio input level to the transmitter, a ten-position audio input gain setting selected through the function menu is provided. The body-pack features a safety cover to protect the soft-touch controls from being accidently activated and a recessed input connector to increase the life of the microphone cable. Inputs are available on the UniPak® for low impedance microphone and high impedance musical instrument or line input. Constructed of metal, the body-pack transmitter features a field replaceable antenna, captive locking battery cover door, a short rigid helical antenna and a flexible wire antenna.
- Available in the following frequency bands:
541.500 - 566.375 MHz (C Band)
655.500 - 680.375 MHz (D Band)
721.500 - 746.375 MHz (G Band) - 25 kHz frequency spacing makes it easier to find a clear, open
- frequency in crowded RF environments
- Dual RF power output selection to optimize battery life
- Digital Tone Lock™ squelch that communicates transmitter data
- to the receiver
- Function menu displayed in a backlit LCD window, controlled by
- internal soft-touch controls
- High efficiency dual companding system for flawless audio
- Four nameable user presets
- Battery fuel gauge on LCD readout
- Recessed microphone input connector
- Power/mute lock provision as well as safety door to cover controls
- Dual-colour power/mute status indictor
- Microphone or line input with DC bias voltage
- 18 dB audio input level adjustment
- Operates on two AA batteries
- Captive locking battery compartment door
- Adjustable squelch
- Rugged metal housing with a reversible clothing clip
- RF Power Output: High: 35 mW; Low: 10 mW, nominal
- Spurious Emissions: According to National Regulations
- Microphone Dynamic Range: >=110 dB, A-weighted
- Instrument Dynamic Range: >=110 dB, A-weighted
- Input Connections: High impedance, low impedance, bias
- Batteries: Two 1.5V AA alkaline (not included)
- Battery Life: Approximately 8 hours (High); 10 hours (Low), depending on battery type and use pattern
- Dimensions: 66.0mm W x 87mm H x 24mm; not including antenna
- Net Weight: 125 g
|
The M3R belt pack receiver is part of the M3 system. Rugged, ergonomic compensate housing includes a field-replaceable flexible-whip antennas. Digital LCD display with soft touch controls. The stereo monitor system offers Personal Mix Control, which gives each musician volume and mix control of two independent signals on stage, via easy-to-use controls on the M2R stereo body-pack receiver. Any number of M2R stereo receivers may be used on the same frequency with a single M2T stereo transmitter. On board 3 level limiter (defeatable) helps protect your hearing from sudden peaks. Includes Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation with 3 sizes of rubber eartips plus an ear-conforming foam tip. Also, an auxiliary input offers a connection point for an ambient microphone, click track, or other mic- or line-level input.
These rugged systems are built to stand up to the inevitable bumps of life on the road, delivering clear, natural sound for touring and installed-sound uses.
- Receiving System: Double conversion superheterodyne
- RF Sensitivity: 20 dBuV (at 60 dB S/N ratio, 50 ohms termination)
- Headphone Output Connector: 3.5 mm TRS stereo phone jack
- Headphones Output Power: 65 mW (at 32 ohms)
- Antenna Input: SMA-type, 50 ohms
- Aux. Input Connector: 3.5 mm TRS stereo phone jack
- Batteries: 2 x 1.5V AA (not included)
- Battery Life: 8 hours (alkaline) Depending on battery type and use pattern
- Dimensions: 70.0 mm (2.76“) W x 25.0 mm (0.98“) D x 110.0 mm (4.33“) H
- Net Weight: 133 g (4.7 oz), without batteries
- Accessories Included: EP3 earphone; flexible antenna
|
Reviews
There are no reviews yet.